Generated by adom_assets · KiCad file format 20240108
HCPL-2231-300E
Broadcom/AVAGO · Logic Output Optoisolators · DIP-8
HCPL-2231-300E from Broadcom/AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE 1 | input | Anode of channel 1 input LED; LED on with IF(ON) of 1.8 mA to 5 mA (HCPL-223X) gives VO1 high. |
| 2 | CATHODE 1 | input | Cathode of channel 1 input LED; input forward voltage must be at most 0.8 V (VF(OFF)) for the LED to be off. |
| 3 | CATHODE 2 | input | Cathode of channel 2 input LED; input forward voltage must be at most 0.8 V (VF(OFF)) for the LED to be off. |
| 4 | ANODE 2 | input | Anode of channel 2 input LED; LED on with IF(ON) of 1.8 mA to 5 mA (HCPL-223X) gives VO2 high. |
| 5 | GND | power_in | Output-side ground; connect a 0.1 µF bypass capacitor between pins 5 and 8. |
| 6 | VO2 | output | Channel 2 totem-pole output (no pull-up needed), high when LED on, low when LED off; sinks 6.4 mA at VOL max 0.5 V. |
| 7 | VO1 | output | Channel 1 totem-pole output (no pull-up needed), high when LED on, low when LED off; sinks 6.4 mA at VOL max 0.5 V. |
| 8 | VCC | power_in | Output-side supply voltage, 4.5 V to 20 V recommended; connect a 0.1 µF bypass capacitor between pins 5 and 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Low Output Voltage | VOL | 0.5 | V | IOL = 6.4 mA (4 TTL Loads) | 10 | ||
| Logic High Output Voltage | VOH | 2.4 | V | IOH = -2.6 mA | 10 | ||
| Logic High Output Voltage | VOH | 2.7 | V | IOH = -0.4 mA | 10 | ||
| Output Leakage Current | IOHH | 100 | μA | VO = 5.5 V, IF = 5 mA | 10 | ||
| Output Leakage Current | IOHH | 500 | μA | VO = 20 V, IF = 5 mA | 10 | ||
| Logic Low Supply Current (HCPL-223X) | ICCL | 7.4 | 12 | mA | VCC = 5.5 V, VF = 0 V | 10 | |
| Logic Low Supply Current (HCPL-223X) | ICCL | 8.6 | 14 | mA | VCC = 20 V, VF = 0 V | 10 | |
| Logic High Supply Current (HCPL-223X) | ICCH | 4.8 | 8 | mA | VCC = 5.5 V, IF = 5 mA | 10 | |
| Logic High Supply Current (HCPL-223X) | ICCH | 5.4 | 10 | mA | VCC = 20 V, IF = 5 mA | 10 | |
| Logic Low Short Circuit Output Current | IOSL | 15 | mA | VO = VCC = 5.5 V, VF = 0 V | 10 | ||
| Logic Low Short Circuit Output Current | IOSL | 20 | mA | VO = VCC = 20 V, VF = 0 V | 10 | ||
| Logic High Short Circuit Output Current | IOSH | -10 | mA | VCC = 5.5 V, IF = 5 mA, VO = GND | 10 | ||
| Logic High Short Circuit Output Current | IOSH | -20 | mA | VCC = 20 V, IF = 5 mA, VO = GND | 10 | ||
| Input Forward Voltage | VF | 1.5 | 1.7 | 1.85 | V | TA = 25°C, IF = 5 mA | 10 |
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 μA | 10 | ||
| Input Diode Temperature Coefficient | ΔVF/ΔTA | -1.7 | mV/°C | IF = 5 mA | 10 | ||
| Input Capacitance | CIN | 60 | pF | f = 1 MHz, VF = 0 V | 10 | ||
| Logic High Common Mode Transient Immunity | /CMH/ | 1000 | V/μs | /VCM/ = 50 V, VCC = 5 V, IF = 1.8 mA, TA = 25°C | 11 | ||
| Logic Low Common Mode Transient Immunity | /CML/ | 1000 | V/μs | /VCM/ = 50 V, VF = 0 V, VCC = 5 V, TA = 25°C | 11 | ||
| Propagation Delay Time to Logic Low | tPHL | 150 | 300 | ns | With Peaking Capacitor | 11 | |
| Propagation Delay Time to Logic Low | tPHL | 150 | ns | Without Peaking Capacitor | 11 | ||
| Propagation Delay Time to Logic High | tPLH | 90 | 300 | ns | With Peaking Capacitor | 11 | |
| Propagation Delay Time to Logic High | tPLH | 110 | ns | Without Peaking Capacitor | 11 | ||
| Output Rise Time (10-90%) | tr | 30 | ns | 11 | |||
| Output Fall Time (90-10%) | tf | 7 | ns | 11 | |||
| Input-Output Momentary Withstand Voltage | VISO | 3750 | V rms | RH < 50%, t = 1 min. | 12 | ||
| Input-Output Capacitance | CI-O | 0.6 | pF | f = 1 MHz | 12 | ||
| Input-Input Insulation Leakage Current | II-I | 0.005 | μA | Relative Humidity = 45%, t = 5 s, VI-I = 500 V | 12 | ||
| Capacitance (Input-Input) | CI-I | 0.25 | pF | f = 1 MHz | 12 | ||
| Storage Temperature | TS | -55 | 125 | °C | 9 | ||
| Operating Temperature | TA | -40 | 85 | °C | 9 | ||
| Average Forward Input Current | IF(AVG) | 10 | mA | Each channel | 9 | ||
| Peak Transient Input Current | IF(TRAN) | 1 | A | ≤ 1 μs Pulse Width, 300 pps | 9 | ||
| Reverse Input Voltage | VR | 5 | V | Each channel | 9 | ||
| Average Output Current | IO | 25 | mA | Each channel | 9 | ||
| Supply Voltage | VCC | 0 | 20 | V | 9 | ||
| Output Voltage | VO | -0.5 | 20 | V | Each channel | 9 | |
| Total Package Power Dissipation (HCPL-223X) | PT | 294 | mW | 9 | |||
| Power Supply Voltage | VCC | 4.5 | 20 | V | 9 | ||
| Forward Input Current (ON) | IF(ON) | 1.8 | 5 | mA | HCPL-223X | 9 | |
| Forward Input Voltage (OFF) | VF(OFF) | 0.8 | V | 9 | |||
| Operating Temperature | TA | -40 | 85 | °C | 9 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 9 | ||
| Fan Out | N | 4 | TTL Loads | 9 |
CAD (Adom-generated)
- Symbol:
HCPL-2231-300E - Footprint:
Adom_Gen:Broadcom_AVAGO_HCPL-223_39c9e6 - 3D model: generated to fit the land (STEP)
- 3D model files:
hcpl-2231-300e-etched.step/hcpl-2231-300e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-2231-300e.step/hcpl-2231-300e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (16 pp, sha256
2a612efba8d4ea87, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.