main
Ray
Publish 0.1.0
3f12413
HC32L073JATA-LQ48
HDSC · HDSC · LQFP-48(7x7)
HC32L073JATA-LQ48 from HDSC, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCAP | power_out | LDO core-supply output for internal circuits only; requires an external decoupling capacitor of at least 1 µF. |
| 2 | PC13 | bidirectional | GPIO port C bit 13 with alternate functions RTC_1HZ, TIM3_CH1B, I2S0_SCK and LVD0 (low-voltage detector input). |
| 3 | XTLI/PC14 | passive | Low-speed crystal input for the 32.768 kHz oscillator (XTL); the pin is also GPIO PC14. |
| 4 | XTLO/PC15 | passive | Low-speed crystal output for the 32.768 kHz oscillator (XTL); the pin is also GPIO PC15. |
| 5 | XTHI/PF00 | passive | High-speed crystal input for the 4-32 MHz oscillator (XTH); the pin is also GPIO PF00 with I2C0_SDA, CRS_SYNC and UART1_TXD functions. |
| 6 | XTHO/PF01 | passive | High-speed crystal output for the 4-32 MHz oscillator (XTH); the pin is also GPIO PF01 with I2C0_SCL, TIM4_CHB and UART1_RXD functions. |
| 7 | RESETB | input | Reset input with an internal weak pull-up of 80 kΩ, VIL max 0.3VCC, VIH min 0.7VCC and 200 mV Schmitt hysteresis. |
| 8 | AVSS | power_in | Analog ground. |
| 9 | AVCC | power_in | Analog supply, 1.8-5.5V; must be the same voltage as DVCC. |
| 10 | SEG23/PA00 | bidirectional | GPIO port A bit 0 with digital functions UART1_CTS, LPUART1_TXD, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA; analog AIN0 and VC0/VC1 inputs; LCD segment SEG23 (073 only). |
| 11 | SEG22/PA01 | bidirectional | GPIO port A bit 1 with digital functions UART1_RTS, LPUART1_RXD, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI; analog AIN1 and VC0/VC1 inputs; LCD segment SEG22. |
| 12 | SEG21/PA02 | bidirectional | GPIO port A bit 2 with digital functions UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO; analog AIN2 and VC0/VC1 inputs; LCD segment SEG21. |
| 13 | SEG20/PA03 | bidirectional | GPIO port A bit 3 with digital functions UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A, TIM5_CHA; analog AIN3 and VC0/VC1 inputs; LCD segment SEG20. |
| 14 | SEG19/PA04 | bidirectional | GPIO port A bit 4 with digital functions SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT, TIM3_CH2B; LCD segment SEG19. |
| 15 | PA05/SEG18 | bidirectional | GPIO port A bit 5 with digital functions SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT, XTH_OUT; LCD segment SEG18. |
| 16 | PA06/SEG17 | bidirectional | GPIO port A bit 6 with digital functions SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT, TIM3_GATE, LPUART0_CTS; LCD segment SEG17. |
| 17 | PA07/SEG16 | bidirectional | GPIO port A bit 7 with digital functions SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT, TIM4_CHB; LCD segment SEG16. |
| 18 | SEG13/PB00 | bidirectional | GPIO port B bit 0 with digital functions PCA_CH2, TIM3_CH1B, LPUART0_TXD, TIM5_CHB, RCH_OUT, RCL_OUT, PLL_OUT; LCD segment SEG13. |
| 19 | SEG12/PB01 | bidirectional | GPIO port B bit 1 with digital functions PCA_CH3, PCLK_OUT, TIM3_CH2B, TIM6_CHB, LPUART0_RTS, VC2_OUT, TCLK_OUT; LCD segment SEG12. |
| 20 | SEG11/PB02 | bidirectional | GPIO port B bit 2 with digital functions LPTIM0_TOG, PCA_ECI, LPUART1_TXD, TIM4_CHA, TIM1_BK, TIM0_BK, TIM2_BK; LCD segment SEG11. |
| 21 | SEG10/PB10 | bidirectional | GPIO port B bit 10 with digital functions I2C1_SCL, SPI1_SCK, TIM1_CHA, LPUART0_TXD, TIM3_CH1A, LPUART1_RTS, UART1_RTS; LCD segment SEG10. |
| 22 | SEG9/PB11 | bidirectional | GPIO port B bit 11 with digital functions I2C1_SDA, TIM1_CHB, LPUART0_RXD, TIM2_GATE, TIM6_CHA, LPUART1_CTS, UART1_CTS; LCD segment SEG9. |
| 23 | DVSS | power_in | Digital ground. |
| 24 | DVCC | power_in | Digital supply, 1.8-5.5V; must be the same voltage as AVCC. |
| 25 | SEG8/PB12 | bidirectional | GPIO port B bit 12 with digital functions SPI1_CS, TIM3_BK, LPUART0_TXD, TIM0_BK, LPUART0_RTS, TIM6_CHA; LCD segment SEG8. |
| 26 | SEG7/PB13 | bidirectional | GPIO port B bit 13 with digital functions SPI1_SCK, I2C1_SCL, TIM3_CH0B, LPUART0_CTS, TIM1_CHA, TIM1_GATE, TIM6_CHB; LCD segment SEG7. |
| 27 | SEG6/PB14 | bidirectional | GPIO port B bit 14 with digital functions SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA, RTC_1HZ, LPUART0_RTS, TIM1_BK; LCD segment SEG6. |
| 28 | SEG5/PB15 | bidirectional | GPIO port B bit 15 with digital functions SPI1_MOSI, TIM3_CH2B, TIM0_CHB, TIM0_GATE, LPUART1_RXD; LCD segment SEG5. |
| 29 | SEG0/PA08 | bidirectional | GPIO port A bit 8 with digital functions UART0_TXD, TIM3_CH0A, CRS_SYNC, CAN_STBY, TIM1_GATE, TIM4_CHA, TIM3_BK; LCD segment SEG0. |
| 30 | COM0/PA09 | bidirectional | GPIO port A bit 9 with digital functions UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT, TIM5_CHA; LCD common output COM0. |
| 31 | COM1/PA10 | bidirectional | GPIO port A bit 10 with digital functions UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT, TIM6_CHA; LCD common output COM1. |
| 32 | COM2/PA11 | bidirectional | GPIO port A bit 11 with digital functions UART0_CTS, TIM3_GATE, I2C1_SCL, CAN_RX, VC0_OUT, SPI0_MISO, TIM4_CHB; LCD common output COM2. |
| 33 | COM3/PA12 | bidirectional | GPIO port A bit 12 with digital functions UART0_RTS, TIM3_ETR, I2C1_SDA, CAN_TX, VC1_OUT, SPI0_MOSI, PCNT_S0; LCD common output COM3. |
| 34 | PA13/SWDIO | bidirectional | GPIO port A bit 13 that serves as the SWD debug data pin SWDIO; other functions include IR_OUT, UART0_RXD, LVD_OUT, TIM3_ETR, RTC_1HZ, PCNT_S1 and VC2_OUT. |
| 35 | DVSS | power_in | Digital ground. |
| 36 | DVCC | power_in | Digital supply, 1.8-5.5V; must be the same voltage as AVCC. |
| 37 | PA14/SWCLK | bidirectional | GPIO port A bit 14 that serves as the SWD debug clock SWCLK; other functions include UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT. |
| 38 | PA15 | bidirectional | GPIO port A bit 15 with digital functions SPI0_CS, UART1_RXD, LPUART1_RTS, TIM0_ETR, TIM0_CHA and TIM3_CH1A. |
| 39 | SEG35/VLCDH/PB03 | bidirectional | GPIO port B bit 3 with digital functions SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, LPTIM0_GATE, XTL_OUT, XTH_OUT; LCD segment SEG35 and VLCDH pin (used in external resistor/capacitor LCD modes). |
| 40 | SEG34/VLCD3/PB04 | bidirectional | GPIO port B bit 4 with digital functions SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE, TIM3_CH0B, LPTIM0_EXT; LCD segment SEG34 and VLCD3 pin (used in external resistor/capacitor LCD modes). |
| 41 | SEG33/VLCD2/PB05 | bidirectional | GPIO port B bit 5 with digital functions SPI0_MOSI, TIM1_BK, PCA_CH1, LPTIM0_GATE, PCNT_S0, UART0_RTS; LCD segment SEG33 and VLCD2 pin (used in external resistor/capacitor LCD modes). |
| 42 | SEG32/VLCD1/PB06 | bidirectional | GPIO port B bit 6 with digital functions I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA, LPTIM0_EXT, TIM3_CH0A, LPTIM0_TOG; LCD segment SEG32 and VLCD1 pin (used in external resistor/capacitor LCD modes). |
| 43 | SEG31/PB07 | bidirectional | GPIO port B bit 7 with digital functions I2C0_SDA, UART0_RXD, TIM2_CHB, LPUART1_CTS, TIM0_CHB, LPTIM0_TOGN, PCNT_S1; LCD segment SEG31. |
| 44 | BOOT0 | input | Boot-mode select sampled at reset: high enters ISP programming mode, low runs the user Flash code with SWD programming available. |
| 45 | SEG29/PB08 | bidirectional | GPIO port B bit 8 with digital functions I2C0_SCL, TIM1_CHA, CAN_RX, TIM2_CHA, TIM0_GATE, TIM3_CH2A, UART0_TXD; LCD segment SEG29. |
| 46 | SEG28/PB09 | bidirectional | GPIO port B bit 9 with digital functions I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, CAN_TX, TIM2_CHB, UART0_RXD; LCD segment SEG28. |
| 47 | DVSS | power_in | Digital ground. |
| 48 | DVCC | power_in | Digital supply, 1.8-5.5V; must be the same voltage as AVCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HDSC |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (AVCC and DVCC) | VCC - VSS | -0.3 | 5.5 | V | 53 | ||
| USB module supply voltage | AVCC_USB | 3 | 3.6 | V | 53 | ||
| Voltage difference between supply pins | /ΔVCCx/ | 50 | mV | 53 | |||
| Voltage difference between ground pins | /VSSx - VSS/ | 50 | mV | 53 | |||
| External input voltage range | Vex | 0 | V | 57 | |||
| LVD detection threshold | Vlevel | 1.7 | 1.8 | 1.9 | V | LVD_CR.VTDS=0000 | 57 |
| LVD detection threshold | Vlevel | 1.8 | 1.9 | 2 | V | LVD_CR.VTDS=0001 | 57 |
| LVD detection threshold | Vlevel | 1.9 | 2 | 2.1 | V | LVD_CR.VTDS=0010 | 57 |
| LVD detection threshold | Vlevel | 2 | 2.1 | 2.2 | V | LVD_CR.VTDS=0011 | 57 |
| LVD detection threshold | Vlevel | 2.1 | 2.2 | 2.3 | V | LVD_CR.VTDS=0100 | 57 |
| LVD detection threshold | Vlevel | 2.2 | 2.3 | 2.4 | V | LVD_CR.VTDS=0101 | 57 |
| LVD detection threshold | Vlevel | 2.3 | 2.4 | 2.5 | V | LVD_CR.VTDS=0110 | 57 |
| LVD detection threshold | Vlevel | 2.4 | 2.5 | 2.6 | V | LVD_CR.VTDS=0111 | 57 |
| LVD detection threshold | Vlevel | 2.5 | 2.6 | 2.7 | V | LVD_CR.VTDS=1000 | 57 |
| LVD detection threshold | Vlevel | 2.6 | 2.7 | 2.8 | V | LVD_CR.VTDS=1001 | 57 |
| LVD detection threshold | Vlevel | 2.7 | 2.8 | 2.9 | V | LVD_CR.VTDS=1010 | 57 |
| LVD detection threshold | Vlevel | 2.8 | 2.9 | 3 | V | LVD_CR.VTDS=1011 | 57 |
| LVD detection threshold | Vlevel | 2.9 | 3 | 3.1 | V | LVD_CR.VTDS=1100 | 57 |
| LVD detection threshold | Vlevel | 3 | 3.1 | 3.2 | V | LVD_CR.VTDS=1101 | 57 |
| LVD detection threshold | Vlevel | 3.1 | 3.2 | 3.3 | V | LVD_CR.VTDS=1110 | 57 |
| LVD detection threshold | Vlevel | 3.2 | 3.3 | 3.4 | V | LVD_CR.VTDS=1111 | 57 |
| Internal 2.5V reference voltage | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温25°C 3.3V | 58 |
| Internal 2.5V reference voltage | VREF25 | 2.463 | 2.5 | 2.525 | V | -40 ~ 85°C 2.8 ~ 5.5V | 58 |
| Internal 1.5V reference voltage | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温25°C 3.3V | 58 |
| Internal 1.5V reference voltage | VREF15 | 1.477 | 1.5 | 1.519 | V | -40 ~ 85°C 1.8 ~ 5.5V | 58 |
| Run mode supply current (RCH clock source 4M) | IDD (Run mode) | 1330 | 1800 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 4M | 59 | |
| Run mode supply current (RCH clock source 8M) | IDD (Run mode) | 2490 | 3430 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 8M | 59 | |
| Run mode supply current (RCH clock source 16M) | IDD (Run mode) | 4990 | 6570 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 16M | 59 | |
| Run mode supply current (RCH clock source 22.12M) | IDD (Run mode) | 6760 | 8960 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 22.12M | 59 | |
| Run mode supply current (RCH clock source 24M) | IDD (Run mode) | 7260 | 9680 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 24M | 59 | |
| Run mode supply current (PLL from RCH4M, 16M) | IDD (Run mode) | 5270 | 6550 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 16M | 59 | |
| Run mode supply current (PLL from RCH4M, 24M) | IDD (Run mode) | 7390 | 9260 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 24M | 59 | |
| Run mode supply current (PLL from RCH4M, 32M) | IDD (Run mode) | 9200 | 10640 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 32M, FlashWait=1 | 59 | |
| Run mode supply current (PLL from RCH4M, 40M) | IDD (Run mode) | 11350 | 13150 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 40M, FlashWait=1 | 59 | |
| Run mode supply current (PLL from RCH4M, 48M) | IDD (Run mode) | 13470 | 15750 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 48M, FlashWait=1 | 59 | |
| Run mode supply current (PLL from RCH8M, 16M) | IDD (Run mode) | 5350 | 6620 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 16M | 59 | |
| Run mode supply current (PLL from RCH8M, 24M) | IDD (Run mode) | 7460 | 9390 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 24M | 59 | |
| Run mode supply current (PLL from RCH8M, 32M) | IDD (Run mode) | 9250 | 10740 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 32M, FlashWait=1 | 59 | |
| Run mode supply current (PLL from RCH8M, 40M) | IDD (Run mode) | 11380 | 13290 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 40M, FlashWait=1 | 59 | |
| Run mode supply current (PLL from RCH8M, 48M) | IDD (Run mode) | 13560 | 15850 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 48M, FlashWait=1 | 59 | |
| Run mode supply current, peripherals off (RCH 4M) | 670 | 1080 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 4M | 59 | ||
| Run mode supply current, peripherals off (RCH 8M) | 1190 | 1990 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 8M | 59 | ||
| Run mode supply current, peripherals off (RCH 16M) | 2280 | 3580 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 16M | 59 | ||
| Run mode supply current, peripherals off (RCH 22.12M) | 3070 | 4790 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 22.12M | 59 |
CAD (KiCad official)
- Symbol:
HC32L073JATA-LQ48 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
hc32l073jata-lq48-etched.step/hc32l073jata-lq48-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc32l073jata-lq48.step/hc32l073jata-lq48.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HDSC datasheet (102 pp, sha256
d7134b3d9cd4f117, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HC32L073JATA-LQ48
**HDSC** · HDSC · LQFP-48(7x7)
HC32L073JATA-LQ48 from HDSC, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCAP | power_out | LDO core-supply output for internal circuits only; requires an external decoupling capacitor of at least 1 µF. |
| 2 | PC13 | bidirectional | GPIO port C bit 13 with alternate functions RTC_1HZ, TIM3_CH1B, I2S0_SCK and LVD0 (low-voltage detector input). |
| 3 | XTLI/PC14 | passive | Low-speed crystal input for the 32.768 kHz oscillator (XTL); the pin is also GPIO PC14. |
| 4 | XTLO/PC15 | passive | Low-speed crystal output for the 32.768 kHz oscillator (XTL); the pin is also GPIO PC15. |
| 5 | XTHI/PF00 | passive | High-speed crystal input for the 4-32 MHz oscillator (XTH); the pin is also GPIO PF00 with I2C0_SDA, CRS_SYNC and UART1_TXD functions. |
| 6 | XTHO/PF01 | passive | High-speed crystal output for the 4-32 MHz oscillator (XTH); the pin is also GPIO PF01 with I2C0_SCL, TIM4_CHB and UART1_RXD functions. |
| 7 | RESETB | input | Reset input with an internal weak pull-up of 80 kΩ, VIL max 0.3VCC, VIH min 0.7VCC and 200 mV Schmitt hysteresis. |
| 8 | AVSS | power_in | Analog ground. |
| 9 | AVCC | power_in | Analog supply, 1.8-5.5V; must be the same voltage as DVCC. |
| 10 | SEG23/PA00 | bidirectional | GPIO port A bit 0 with digital functions UART1_CTS, LPUART1_TXD, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA; analog AIN0 and VC0/VC1 inputs; LCD segment SEG23 (073 only). |
| 11 | SEG22/PA01 | bidirectional | GPIO port A bit 1 with digital functions UART1_RTS, LPUART1_RXD, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI; analog AIN1 and VC0/VC1 inputs; LCD segment SEG22. |
| 12 | SEG21/PA02 | bidirectional | GPIO port A bit 2 with digital functions UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO; analog AIN2 and VC0/VC1 inputs; LCD segment SEG21. |
| 13 | SEG20/PA03 | bidirectional | GPIO port A bit 3 with digital functions UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A, TIM5_CHA; analog AIN3 and VC0/VC1 inputs; LCD segment SEG20. |
| 14 | SEG19/PA04 | bidirectional | GPIO port A bit 4 with digital functions SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT, TIM3_CH2B; LCD segment SEG19. |
| 15 | PA05/SEG18 | bidirectional | GPIO port A bit 5 with digital functions SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT, XTH_OUT; LCD segment SEG18. |
| 16 | PA06/SEG17 | bidirectional | GPIO port A bit 6 with digital functions SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT, TIM3_GATE, LPUART0_CTS; LCD segment SEG17. |
| 17 | PA07/SEG16 | bidirectional | GPIO port A bit 7 with digital functions SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT, TIM4_CHB; LCD segment SEG16. |
| 18 | SEG13/PB00 | bidirectional | GPIO port B bit 0 with digital functions PCA_CH2, TIM3_CH1B, LPUART0_TXD, TIM5_CHB, RCH_OUT, RCL_OUT, PLL_OUT; LCD segment SEG13. |
| 19 | SEG12/PB01 | bidirectional | GPIO port B bit 1 with digital functions PCA_CH3, PCLK_OUT, TIM3_CH2B, TIM6_CHB, LPUART0_RTS, VC2_OUT, TCLK_OUT; LCD segment SEG12. |
| 20 | SEG11/PB02 | bidirectional | GPIO port B bit 2 with digital functions LPTIM0_TOG, PCA_ECI, LPUART1_TXD, TIM4_CHA, TIM1_BK, TIM0_BK, TIM2_BK; LCD segment SEG11. |
| 21 | SEG10/PB10 | bidirectional | GPIO port B bit 10 with digital functions I2C1_SCL, SPI1_SCK, TIM1_CHA, LPUART0_TXD, TIM3_CH1A, LPUART1_RTS, UART1_RTS; LCD segment SEG10. |
| 22 | SEG9/PB11 | bidirectional | GPIO port B bit 11 with digital functions I2C1_SDA, TIM1_CHB, LPUART0_RXD, TIM2_GATE, TIM6_CHA, LPUART1_CTS, UART1_CTS; LCD segment SEG9. |
| 23 | DVSS | power_in | Digital ground. |
| 24 | DVCC | power_in | Digital supply, 1.8-5.5V; must be the same voltage as AVCC. |
| 25 | SEG8/PB12 | bidirectional | GPIO port B bit 12 with digital functions SPI1_CS, TIM3_BK, LPUART0_TXD, TIM0_BK, LPUART0_RTS, TIM6_CHA; LCD segment SEG8. |
| 26 | SEG7/PB13 | bidirectional | GPIO port B bit 13 with digital functions SPI1_SCK, I2C1_SCL, TIM3_CH0B, LPUART0_CTS, TIM1_CHA, TIM1_GATE, TIM6_CHB; LCD segment SEG7. |
| 27 | SEG6/PB14 | bidirectional | GPIO port B bit 14 with digital functions SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA, RTC_1HZ, LPUART0_RTS, TIM1_BK; LCD segment SEG6. |
| 28 | SEG5/PB15 | bidirectional | GPIO port B bit 15 with digital functions SPI1_MOSI, TIM3_CH2B, TIM0_CHB, TIM0_GATE, LPUART1_RXD; LCD segment SEG5. |
| 29 | SEG0/PA08 | bidirectional | GPIO port A bit 8 with digital functions UART0_TXD, TIM3_CH0A, CRS_SYNC, CAN_STBY, TIM1_GATE, TIM4_CHA, TIM3_BK; LCD segment SEG0. |
| 30 | COM0/PA09 | bidirectional | GPIO port A bit 9 with digital functions UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT, TIM5_CHA; LCD common output COM0. |
| 31 | COM1/PA10 | bidirectional | GPIO port A bit 10 with digital functions UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT, TIM6_CHA; LCD common output COM1. |
| 32 | COM2/PA11 | bidirectional | GPIO port A bit 11 with digital functions UART0_CTS, TIM3_GATE, I2C1_SCL, CAN_RX, VC0_OUT, SPI0_MISO, TIM4_CHB; LCD common output COM2. |
| 33 | COM3/PA12 | bidirectional | GPIO port A bit 12 with digital functions UART0_RTS, TIM3_ETR, I2C1_SDA, CAN_TX, VC1_OUT, SPI0_MOSI, PCNT_S0; LCD common output COM3. |
| 34 | PA13/SWDIO | bidirectional | GPIO port A bit 13 that serves as the SWD debug data pin SWDIO; other functions include IR_OUT, UART0_RXD, LVD_OUT, TIM3_ETR, RTC_1HZ, PCNT_S1 and VC2_OUT. |
| 35 | DVSS | power_in | Digital ground. |
| 36 | DVCC | power_in | Digital supply, 1.8-5.5V; must be the same voltage as AVCC. |
| 37 | PA14/SWCLK | bidirectional | GPIO port A bit 14 that serves as the SWD debug clock SWCLK; other functions include UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT. |
| 38 | PA15 | bidirectional | GPIO port A bit 15 with digital functions SPI0_CS, UART1_RXD, LPUART1_RTS, TIM0_ETR, TIM0_CHA and TIM3_CH1A. |
| 39 | SEG35/VLCDH/PB03 | bidirectional | GPIO port B bit 3 with digital functions SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, LPTIM0_GATE, XTL_OUT, XTH_OUT; LCD segment SEG35 and VLCDH pin (used in external resistor/capacitor LCD modes). |
| 40 | SEG34/VLCD3/PB04 | bidirectional | GPIO port B bit 4 with digital functions SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE, TIM3_CH0B, LPTIM0_EXT; LCD segment SEG34 and VLCD3 pin (used in external resistor/capacitor LCD modes). |
| 41 | SEG33/VLCD2/PB05 | bidirectional | GPIO port B bit 5 with digital functions SPI0_MOSI, TIM1_BK, PCA_CH1, LPTIM0_GATE, PCNT_S0, UART0_RTS; LCD segment SEG33 and VLCD2 pin (used in external resistor/capacitor LCD modes). |
| 42 | SEG32/VLCD1/PB06 | bidirectional | GPIO port B bit 6 with digital functions I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA, LPTIM0_EXT, TIM3_CH0A, LPTIM0_TOG; LCD segment SEG32 and VLCD1 pin (used in external resistor/capacitor LCD modes). |
| 43 | SEG31/PB07 | bidirectional | GPIO port B bit 7 with digital functions I2C0_SDA, UART0_RXD, TIM2_CHB, LPUART1_CTS, TIM0_CHB, LPTIM0_TOGN, PCNT_S1; LCD segment SEG31. |
| 44 | BOOT0 | input | Boot-mode select sampled at reset: high enters ISP programming mode, low runs the user Flash code with SWD programming available. |
| 45 | SEG29/PB08 | bidirectional | GPIO port B bit 8 with digital functions I2C0_SCL, TIM1_CHA, CAN_RX, TIM2_CHA, TIM0_GATE, TIM3_CH2A, UART0_TXD; LCD segment SEG29. |
| 46 | SEG28/PB09 | bidirectional | GPIO port B bit 9 with digital functions I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, CAN_TX, TIM2_CHB, UART0_RXD; LCD segment SEG28. |
| 47 | DVSS | power_in | Digital ground. |
| 48 | DVCC | power_in | Digital supply, 1.8-5.5V; must be the same voltage as AVCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HDSC |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (AVCC and DVCC) | VCC - VSS | -0.3 | | 5.5 | V | | 53 |
| USB module supply voltage | AVCC_USB | 3 | | 3.6 | V | | 53 |
| Voltage difference between supply pins | /ΔVCCx/ | | | 50 | mV | | 53 |
| Voltage difference between ground pins | /VSSx - VSS/ | | | 50 | mV | | 53 |
| External input voltage range | Vex | 0 | | | V | | 57 |
| LVD detection threshold | Vlevel | 1.7 | 1.8 | 1.9 | V | LVD_CR.VTDS=0000 | 57 |
| LVD detection threshold | Vlevel | 1.8 | 1.9 | 2 | V | LVD_CR.VTDS=0001 | 57 |
| LVD detection threshold | Vlevel | 1.9 | 2 | 2.1 | V | LVD_CR.VTDS=0010 | 57 |
| LVD detection threshold | Vlevel | 2 | 2.1 | 2.2 | V | LVD_CR.VTDS=0011 | 57 |
| LVD detection threshold | Vlevel | 2.1 | 2.2 | 2.3 | V | LVD_CR.VTDS=0100 | 57 |
| LVD detection threshold | Vlevel | 2.2 | 2.3 | 2.4 | V | LVD_CR.VTDS=0101 | 57 |
| LVD detection threshold | Vlevel | 2.3 | 2.4 | 2.5 | V | LVD_CR.VTDS=0110 | 57 |
| LVD detection threshold | Vlevel | 2.4 | 2.5 | 2.6 | V | LVD_CR.VTDS=0111 | 57 |
| LVD detection threshold | Vlevel | 2.5 | 2.6 | 2.7 | V | LVD_CR.VTDS=1000 | 57 |
| LVD detection threshold | Vlevel | 2.6 | 2.7 | 2.8 | V | LVD_CR.VTDS=1001 | 57 |
| LVD detection threshold | Vlevel | 2.7 | 2.8 | 2.9 | V | LVD_CR.VTDS=1010 | 57 |
| LVD detection threshold | Vlevel | 2.8 | 2.9 | 3 | V | LVD_CR.VTDS=1011 | 57 |
| LVD detection threshold | Vlevel | 2.9 | 3 | 3.1 | V | LVD_CR.VTDS=1100 | 57 |
| LVD detection threshold | Vlevel | 3 | 3.1 | 3.2 | V | LVD_CR.VTDS=1101 | 57 |
| LVD detection threshold | Vlevel | 3.1 | 3.2 | 3.3 | V | LVD_CR.VTDS=1110 | 57 |
| LVD detection threshold | Vlevel | 3.2 | 3.3 | 3.4 | V | LVD_CR.VTDS=1111 | 57 |
| Internal 2.5V reference voltage | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温25°C 3.3V | 58 |
| Internal 2.5V reference voltage | VREF25 | 2.463 | 2.5 | 2.525 | V | -40 ~ 85°C 2.8 ~ 5.5V | 58 |
| Internal 1.5V reference voltage | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温25°C 3.3V | 58 |
| Internal 1.5V reference voltage | VREF15 | 1.477 | 1.5 | 1.519 | V | -40 ~ 85°C 1.8 ~ 5.5V | 58 |
| Run mode supply current (RCH clock source 4M) | IDD (Run mode) | | 1330 | 1800 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 4M | 59 |
| Run mode supply current (RCH clock source 8M) | IDD (Run mode) | | 2490 | 3430 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 8M | 59 |
| Run mode supply current (RCH clock source 16M) | IDD (Run mode) | | 4990 | 6570 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 16M | 59 |
| Run mode supply current (RCH clock source 22.12M) | IDD (Run mode) | | 6760 | 8960 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 22.12M | 59 |
| Run mode supply current (RCH clock source 24M) | IDD (Run mode) | | 7260 | 9680 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 24M | 59 |
| Run mode supply current (PLL from RCH4M, 16M) | IDD (Run mode) | | 5270 | 6550 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 16M | 59 |
| Run mode supply current (PLL from RCH4M, 24M) | IDD (Run mode) | | 7390 | 9260 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 24M | 59 |
| Run mode supply current (PLL from RCH4M, 32M) | IDD (Run mode) | | 9200 | 10640 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 32M, FlashWait=1 | 59 |
| Run mode supply current (PLL from RCH4M, 40M) | IDD (Run mode) | | 11350 | 13150 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 40M, FlashWait=1 | 59 |
| Run mode supply current (PLL from RCH4M, 48M) | IDD (Run mode) | | 13470 | 15750 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 48M, FlashWait=1 | 59 |
| Run mode supply current (PLL from RCH8M, 16M) | IDD (Run mode) | | 5350 | 6620 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 16M | 59 |
| Run mode supply current (PLL from RCH8M, 24M) | IDD (Run mode) | | 7460 | 9390 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 24M | 59 |
| Run mode supply current (PLL from RCH8M, 32M) | IDD (Run mode) | | 9250 | 10740 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 32M, FlashWait=1 | 59 |
| Run mode supply current (PLL from RCH8M, 40M) | IDD (Run mode) | | 11380 | 13290 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 40M, FlashWait=1 | 59 |
| Run mode supply current (PLL from RCH8M, 48M) | IDD (Run mode) | | 13560 | 15850 | μA | All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 48M, FlashWait=1 | 59 |
| Run mode supply current, peripherals off (RCH 4M) | | | 670 | 1080 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 4M | 59 |
| Run mode supply current, peripherals off (RCH 8M) | | | 1190 | 1990 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 8M | 59 |
| Run mode supply current, peripherals off (RCH 16M) | | | 2280 | 3580 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 16M | 59 |
| Run mode supply current, peripherals off (RCH 22.12M) | | | 3070 | 4790 | μA | All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 22.12M | 59 |
## CAD (KiCad official)
- Symbol: `HC32L073JATA-LQ48`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `hc32l073jata-lq48-etched.step` / `hc32l073jata-lq48-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hc32l073jata-lq48.step` / `hc32l073jata-lq48.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HDSC datasheet](docs/hc32l073jata-lq48-datasheet.pdf) (102 pp, sha256 `d7134b3d9cd4f117`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hc32l073jata-lq48-datasheet.pdf)