main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hc32l073jata-lq48: viewers · Ray
hc32l073jata-lq48-etched.glb Publish 0.1.0 · Ray
hc32l073jata-lq48-etched.step hc32l073jata-lq48: factory component page (tier=lcsc) · Ray
hc32l073jata-lq48-hero.glb hc32l073jata-lq48: hero GLB from the etched model (keeps the MPN mark) · Ray
hc32l073jata-lq48-hero.overlay.json Publish 0.1.0 · Ray
hc32l073jata-lq48.glb Publish 0.1.0 · Ray
hc32l073jata-lq48.kicad_mod Publish 0.1.0 · Ray
hc32l073jata-lq48.kicad_sym Publish 0.1.0 · Ray
hc32l073jata-lq48.lbr Publish 0.1.0 · Ray
hc32l073jata-lq48.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 48 pins · Ray

HC32L073JATA-LQ48

HDSC · HDSC · LQFP-48(7x7)

HC32L073JATA-LQ48 from HDSC, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCAP power_out LDO core-supply output for internal circuits only; requires an external decoupling capacitor of at least 1 µF.
2 PC13 bidirectional GPIO port C bit 13 with alternate functions RTC_1HZ, TIM3_CH1B, I2S0_SCK and LVD0 (low-voltage detector input).
3 XTLI/PC14 passive Low-speed crystal input for the 32.768 kHz oscillator (XTL); the pin is also GPIO PC14.
4 XTLO/PC15 passive Low-speed crystal output for the 32.768 kHz oscillator (XTL); the pin is also GPIO PC15.
5 XTHI/PF00 passive High-speed crystal input for the 4-32 MHz oscillator (XTH); the pin is also GPIO PF00 with I2C0_SDA, CRS_SYNC and UART1_TXD functions.
6 XTHO/PF01 passive High-speed crystal output for the 4-32 MHz oscillator (XTH); the pin is also GPIO PF01 with I2C0_SCL, TIM4_CHB and UART1_RXD functions.
7 RESETB input Reset input with an internal weak pull-up of 80 kΩ, VIL max 0.3VCC, VIH min 0.7VCC and 200 mV Schmitt hysteresis.
8 AVSS power_in Analog ground.
9 AVCC power_in Analog supply, 1.8-5.5V; must be the same voltage as DVCC.
10 SEG23/PA00 bidirectional GPIO port A bit 0 with digital functions UART1_CTS, LPUART1_TXD, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA; analog AIN0 and VC0/VC1 inputs; LCD segment SEG23 (073 only).
11 SEG22/PA01 bidirectional GPIO port A bit 1 with digital functions UART1_RTS, LPUART1_RXD, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI; analog AIN1 and VC0/VC1 inputs; LCD segment SEG22.
12 SEG21/PA02 bidirectional GPIO port A bit 2 with digital functions UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO; analog AIN2 and VC0/VC1 inputs; LCD segment SEG21.
13 SEG20/PA03 bidirectional GPIO port A bit 3 with digital functions UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A, TIM5_CHA; analog AIN3 and VC0/VC1 inputs; LCD segment SEG20.
14 SEG19/PA04 bidirectional GPIO port A bit 4 with digital functions SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT, TIM3_CH2B; LCD segment SEG19.
15 PA05/SEG18 bidirectional GPIO port A bit 5 with digital functions SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT, XTH_OUT; LCD segment SEG18.
16 PA06/SEG17 bidirectional GPIO port A bit 6 with digital functions SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT, TIM3_GATE, LPUART0_CTS; LCD segment SEG17.
17 PA07/SEG16 bidirectional GPIO port A bit 7 with digital functions SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT, TIM4_CHB; LCD segment SEG16.
18 SEG13/PB00 bidirectional GPIO port B bit 0 with digital functions PCA_CH2, TIM3_CH1B, LPUART0_TXD, TIM5_CHB, RCH_OUT, RCL_OUT, PLL_OUT; LCD segment SEG13.
19 SEG12/PB01 bidirectional GPIO port B bit 1 with digital functions PCA_CH3, PCLK_OUT, TIM3_CH2B, TIM6_CHB, LPUART0_RTS, VC2_OUT, TCLK_OUT; LCD segment SEG12.
20 SEG11/PB02 bidirectional GPIO port B bit 2 with digital functions LPTIM0_TOG, PCA_ECI, LPUART1_TXD, TIM4_CHA, TIM1_BK, TIM0_BK, TIM2_BK; LCD segment SEG11.
21 SEG10/PB10 bidirectional GPIO port B bit 10 with digital functions I2C1_SCL, SPI1_SCK, TIM1_CHA, LPUART0_TXD, TIM3_CH1A, LPUART1_RTS, UART1_RTS; LCD segment SEG10.
22 SEG9/PB11 bidirectional GPIO port B bit 11 with digital functions I2C1_SDA, TIM1_CHB, LPUART0_RXD, TIM2_GATE, TIM6_CHA, LPUART1_CTS, UART1_CTS; LCD segment SEG9.
23 DVSS power_in Digital ground.
24 DVCC power_in Digital supply, 1.8-5.5V; must be the same voltage as AVCC.
25 SEG8/PB12 bidirectional GPIO port B bit 12 with digital functions SPI1_CS, TIM3_BK, LPUART0_TXD, TIM0_BK, LPUART0_RTS, TIM6_CHA; LCD segment SEG8.
26 SEG7/PB13 bidirectional GPIO port B bit 13 with digital functions SPI1_SCK, I2C1_SCL, TIM3_CH0B, LPUART0_CTS, TIM1_CHA, TIM1_GATE, TIM6_CHB; LCD segment SEG7.
27 SEG6/PB14 bidirectional GPIO port B bit 14 with digital functions SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA, RTC_1HZ, LPUART0_RTS, TIM1_BK; LCD segment SEG6.
28 SEG5/PB15 bidirectional GPIO port B bit 15 with digital functions SPI1_MOSI, TIM3_CH2B, TIM0_CHB, TIM0_GATE, LPUART1_RXD; LCD segment SEG5.
29 SEG0/PA08 bidirectional GPIO port A bit 8 with digital functions UART0_TXD, TIM3_CH0A, CRS_SYNC, CAN_STBY, TIM1_GATE, TIM4_CHA, TIM3_BK; LCD segment SEG0.
30 COM0/PA09 bidirectional GPIO port A bit 9 with digital functions UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT, TIM5_CHA; LCD common output COM0.
31 COM1/PA10 bidirectional GPIO port A bit 10 with digital functions UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT, TIM6_CHA; LCD common output COM1.
32 COM2/PA11 bidirectional GPIO port A bit 11 with digital functions UART0_CTS, TIM3_GATE, I2C1_SCL, CAN_RX, VC0_OUT, SPI0_MISO, TIM4_CHB; LCD common output COM2.
33 COM3/PA12 bidirectional GPIO port A bit 12 with digital functions UART0_RTS, TIM3_ETR, I2C1_SDA, CAN_TX, VC1_OUT, SPI0_MOSI, PCNT_S0; LCD common output COM3.
34 PA13/SWDIO bidirectional GPIO port A bit 13 that serves as the SWD debug data pin SWDIO; other functions include IR_OUT, UART0_RXD, LVD_OUT, TIM3_ETR, RTC_1HZ, PCNT_S1 and VC2_OUT.
35 DVSS power_in Digital ground.
36 DVCC power_in Digital supply, 1.8-5.5V; must be the same voltage as AVCC.
37 PA14/SWCLK bidirectional GPIO port A bit 14 that serves as the SWD debug clock SWCLK; other functions include UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT.
38 PA15 bidirectional GPIO port A bit 15 with digital functions SPI0_CS, UART1_RXD, LPUART1_RTS, TIM0_ETR, TIM0_CHA and TIM3_CH1A.
39 SEG35/VLCDH/PB03 bidirectional GPIO port B bit 3 with digital functions SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, LPTIM0_GATE, XTL_OUT, XTH_OUT; LCD segment SEG35 and VLCDH pin (used in external resistor/capacitor LCD modes).
40 SEG34/VLCD3/PB04 bidirectional GPIO port B bit 4 with digital functions SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE, TIM3_CH0B, LPTIM0_EXT; LCD segment SEG34 and VLCD3 pin (used in external resistor/capacitor LCD modes).
41 SEG33/VLCD2/PB05 bidirectional GPIO port B bit 5 with digital functions SPI0_MOSI, TIM1_BK, PCA_CH1, LPTIM0_GATE, PCNT_S0, UART0_RTS; LCD segment SEG33 and VLCD2 pin (used in external resistor/capacitor LCD modes).
42 SEG32/VLCD1/PB06 bidirectional GPIO port B bit 6 with digital functions I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA, LPTIM0_EXT, TIM3_CH0A, LPTIM0_TOG; LCD segment SEG32 and VLCD1 pin (used in external resistor/capacitor LCD modes).
43 SEG31/PB07 bidirectional GPIO port B bit 7 with digital functions I2C0_SDA, UART0_RXD, TIM2_CHB, LPUART1_CTS, TIM0_CHB, LPTIM0_TOGN, PCNT_S1; LCD segment SEG31.
44 BOOT0 input Boot-mode select sampled at reset: high enters ISP programming mode, low runs the user Flash code with SWD programming available.
45 SEG29/PB08 bidirectional GPIO port B bit 8 with digital functions I2C0_SCL, TIM1_CHA, CAN_RX, TIM2_CHA, TIM0_GATE, TIM3_CH2A, UART0_TXD; LCD segment SEG29.
46 SEG28/PB09 bidirectional GPIO port B bit 9 with digital functions I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, CAN_TX, TIM2_CHB, UART0_RXD; LCD segment SEG28.
47 DVSS power_in Digital ground.
48 DVCC power_in Digital supply, 1.8-5.5V; must be the same voltage as AVCC.

Key specifications

Parameter Value
Manufacturer HDSC
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (AVCC and DVCC) VCC - VSS -0.3 5.5 V 53
USB module supply voltage AVCC_USB 3 3.6 V 53
Voltage difference between supply pins /ΔVCCx/ 50 mV 53
Voltage difference between ground pins /VSSx - VSS/ 50 mV 53
External input voltage range Vex 0 V 57
LVD detection threshold Vlevel 1.7 1.8 1.9 V LVD_CR.VTDS=0000 57
LVD detection threshold Vlevel 1.8 1.9 2 V LVD_CR.VTDS=0001 57
LVD detection threshold Vlevel 1.9 2 2.1 V LVD_CR.VTDS=0010 57
LVD detection threshold Vlevel 2 2.1 2.2 V LVD_CR.VTDS=0011 57
LVD detection threshold Vlevel 2.1 2.2 2.3 V LVD_CR.VTDS=0100 57
LVD detection threshold Vlevel 2.2 2.3 2.4 V LVD_CR.VTDS=0101 57
LVD detection threshold Vlevel 2.3 2.4 2.5 V LVD_CR.VTDS=0110 57
LVD detection threshold Vlevel 2.4 2.5 2.6 V LVD_CR.VTDS=0111 57
LVD detection threshold Vlevel 2.5 2.6 2.7 V LVD_CR.VTDS=1000 57
LVD detection threshold Vlevel 2.6 2.7 2.8 V LVD_CR.VTDS=1001 57
LVD detection threshold Vlevel 2.7 2.8 2.9 V LVD_CR.VTDS=1010 57
LVD detection threshold Vlevel 2.8 2.9 3 V LVD_CR.VTDS=1011 57
LVD detection threshold Vlevel 2.9 3 3.1 V LVD_CR.VTDS=1100 57
LVD detection threshold Vlevel 3 3.1 3.2 V LVD_CR.VTDS=1101 57
LVD detection threshold Vlevel 3.1 3.2 3.3 V LVD_CR.VTDS=1110 57
LVD detection threshold Vlevel 3.2 3.3 3.4 V LVD_CR.VTDS=1111 57
Internal 2.5V reference voltage VREF25 2.475 2.5 2.525 V 常温25°C 3.3V 58
Internal 2.5V reference voltage VREF25 2.463 2.5 2.525 V -40 ~ 85°C 2.8 ~ 5.5V 58
Internal 1.5V reference voltage VREF15 1.485 1.5 1.515 V 常温25°C 3.3V 58
Internal 1.5V reference voltage VREF15 1.477 1.5 1.519 V -40 ~ 85°C 1.8 ~ 5.5V 58
Run mode supply current (RCH clock source 4M) IDD (Run mode) 1330 1800 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 4M 59
Run mode supply current (RCH clock source 8M) IDD (Run mode) 2490 3430 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 8M 59
Run mode supply current (RCH clock source 16M) IDD (Run mode) 4990 6570 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 16M 59
Run mode supply current (RCH clock source 22.12M) IDD (Run mode) 6760 8960 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 22.12M 59
Run mode supply current (RCH clock source 24M) IDD (Run mode) 7260 9680 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 24M 59
Run mode supply current (PLL from RCH4M, 16M) IDD (Run mode) 5270 6550 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 16M 59
Run mode supply current (PLL from RCH4M, 24M) IDD (Run mode) 7390 9260 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 24M 59
Run mode supply current (PLL from RCH4M, 32M) IDD (Run mode) 9200 10640 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 32M, FlashWait=1 59
Run mode supply current (PLL from RCH4M, 40M) IDD (Run mode) 11350 13150 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 40M, FlashWait=1 59
Run mode supply current (PLL from RCH4M, 48M) IDD (Run mode) 13470 15750 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH4M to xxM clock source, 48M, FlashWait=1 59
Run mode supply current (PLL from RCH8M, 16M) IDD (Run mode) 5350 6620 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 16M 59
Run mode supply current (PLL from RCH8M, 24M) IDD (Run mode) 7460 9390 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 24M 59
Run mode supply current (PLL from RCH8M, 32M) IDD (Run mode) 9250 10740 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 32M, FlashWait=1 59
Run mode supply current (PLL from RCH8M, 40M) IDD (Run mode) 11380 13290 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 40M, FlashWait=1 59
Run mode supply current (PLL from RCH8M, 48M) IDD (Run mode) 13560 15850 μA All peripherals clock ON, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, PLL RCH8M to xxM clock source, 48M, FlashWait=1 59
Run mode supply current, peripherals off (RCH 4M) 670 1080 μA All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 4M 59
Run mode supply current, peripherals off (RCH 8M) 1190 1990 μA All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 8M 59
Run mode supply current, peripherals off (RCH 16M) 2280 3580 μA All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 16M 59
Run mode supply current, peripherals off (RCH 22.12M) 3070 4790 μA All peripherals clock OFF, Run while(1) in Flash, Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85℃, RCH clock source 22.12M 59

CAD (KiCad official)

  • Symbol: HC32L073JATA-LQ48
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: hc32l073jata-lq48-etched.step / hc32l073jata-lq48-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hc32l073jata-lq48.step / hc32l073jata-lq48.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HDSC datasheet (102 pp, sha256 d7134b3d9cd4f117, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF