main
Ray Publish 0.1.0 62b6c49

HC32F072JATA-LQ48

HDSC · Other Processors and Microcontrollers (MCUs) · LQFP-48(7x7)

HC32F072JATA-LQ48 from HDSC, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCAP power_out LDO core supply output for internal circuits only, requires an external decoupling capacitor of at least 1uF.
2 PC13 bidirectional GPIO PC13 with digital functions TIM3_CH1B and I2S0_SCK and analog LVD0 input.
3 PC14/XTLI bidirectional GPIO PC14, also the XTL 32.768kHz crystal oscillator input XTLI.
4 PC15/XTLO bidirectional GPIO PC15, also the XTL 32.768kHz crystal oscillator output XTLO.
5 PF00/XTHI bidirectional GPIO PF00 with I2C0_SDA, CRS_SYNC and UART1_TXD, also the XTH 4-32MHz crystal oscillator input XTHI.
6 PF01/XTHO bidirectional GPIO PF01 with I2C0_SCL, TIM4_CHB and UART1_RXD, also the XTH 4-32MHz crystal oscillator output XTHO.
7 RESETB input Reset input with a non-removable weak pull-up (typ. 80kOhm), VIL max 0.3VCC and VIH min 0.7VCC.
8 AVSS power_in Analog ground.
9 AVCC power_in Analog supply, 1.8 to 5.5V, must be at the same voltage as DVCC.
10 PA00 bidirectional GPIO PA00 with UART1_CTS, LPUART1_TXD, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA and analog AIN0, VC0/VC1 inputs.
11 PA01 bidirectional GPIO PA01 with UART1_RTS, LPUART1_RXD, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI and analog AIN1, VC0/VC1 inputs.
12 PA02 bidirectional GPIO PA02 with UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO and analog AIN2, VC0/VC1 inputs.
13 PA03 bidirectional GPIO PA03 with UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A, TIM5_CHA and analog AIN3, VC0/VC1 inputs.
14 PA04 bidirectional GPIO PA04 with SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT, TIM3_CH2B and analog AIN4, VC inputs, OP3_OUT, DAC0_OUT.
15 PA05 bidirectional GPIO PA05 with SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT and XTH_OUT selectable via PSEL.
16 PA06 bidirectional GPIO PA06 with SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT, TIM3_GATE and LPUART0_CTS selectable via PSEL.
17 PA07 bidirectional GPIO PA07 with SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT and TIM4_CHB selectable via PSEL.
18 PB00 bidirectional GPIO PB00 with PCA_CH2, TIM3_CH1B, LPUART0_TXD, TIM5_CHB, RCH_OUT, RCL_OUT and PLL_OUT selectable via PSEL.
19 PB01 bidirectional GPIO PB01 with PCA_CH3, PCLK_OUT, TIM3_CH2B, TIM6_CHB, LPUART0_RTS, VC2_OUT and TCLK_OUT selectable via PSEL.
20 PB02 bidirectional GPIO PB02 with PCA_ECI, LPUART1_TXD, TIM4_CHA, TIM1_BK, TIM0_BK and TIM2_BK selectable via PSEL.
21 PB10 bidirectional GPIO PB10 with I2C1_SCL, SPI1_SCK, TIM1_CHA, LPUART0_TXD, TIM3_CH1A, LPUART1_RTS and UART1_RTS selectable via PSEL.
22 PB11 bidirectional GPIO PB11 with I2C1_SDA, TIM1_CHB, LPUART0_RXD, TIM2_GATE, TIM6_CHA, LPUART1_CTS and UART1_CTS selectable via PSEL.
23 DVSS power_in Digital ground.
24 DVCC power_in Digital supply, 1.8 to 5.5V, must be at the same voltage as AVCC.
25 PB12 bidirectional GPIO PB12 with SPI1_CS, TIM3_BK, LPUART0_TXD, TIM0_BK, LPUART0_RTS and TIM6_CHA selectable via PSEL.
26 PB13 bidirectional GPIO PB13 with SPI1_SCK, I2C1_SCL, TIM3_CH0B, LPUART0_CTS, TIM1_CHA, TIM1_GATE and TIM6_CHB selectable via PSEL.
27 PB14 bidirectional GPIO PB14 with SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA, LPUART0_RTS and TIM1_BK selectable via PSEL.
28 PB15 bidirectional GPIO PB15 with SPI1_MOSI, TIM3_CH2B, TIM0_CHB, TIM0_GATE and LPUART1_RXD selectable via PSEL.
29 PA08 bidirectional GPIO PA08 with UART0_TXD, TIM3_CH0A, CRS_SYNC, CAN_STBY, TIM1_GATE, TIM4_CHA and TIM3_BK selectable via PSEL.
30 PA09 bidirectional GPIO PA09 with UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT and TIM5_CHA selectable via PSEL.
31 PA10 bidirectional GPIO PA10 with UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT and TIM6_CHA selectable via PSEL.
32 USB_DM bidirectional USB full-speed device data minus signal.
33 USB_DP bidirectional USB full-speed device data plus signal.
34 PA13/SWDIO bidirectional GPIO PA13 with IR_OUT, UART0_RXD, LVD_OUT, TIM3_ETR and VC2_OUT, also the SWD data line SWDIO.
35 AVSS_USB power_in USB module ground.
36 AVCC_USB power_in USB module supply of 3.0 to 3.6V, not above AVCC/DVCC by more than 0.3V, recommended floating or grounded when USB is unused.
37 PA14/SWCLK bidirectional GPIO PA14 with UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT, also the SWD clock SWCLK.
38 PA15 bidirectional GPIO PA15 with SPI0_CS, UART1_RXD, LPUART1_RTS, TIM0_ETR, TIM0_CHA and TIM3_CH1A selectable via PSEL.
39 PB03 bidirectional GPIO PB03 with SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, XTL_OUT and XTH_OUT selectable via PSEL.
40 PB04 bidirectional GPIO PB04 with SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE and TIM3_CH0B selectable via PSEL.
41 PB05 bidirectional GPIO PB05 with SPI0_MOSI, TIM1_BK, PCA_CH1 and UART0_RTS selectable via PSEL.
42 PB06 bidirectional GPIO PB06 with I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA and TIM3_CH0A selectable via PSEL.
43 PB07 bidirectional GPIO PB07 with I2C0_SDA, UART0_RXD, TIM2_CHB, LPUART1_CTS and TIM0_CHB, also an LVD monitor source.
44 BOOT0 input BOOT0 (PF11): high at reset selects ISP programming mode, low at reset selects user mode executing Flash code.
45 PB08 bidirectional GPIO PB08 with I2C0_SCL, TIM1_CHA, CAN_RX, TIM2_CHA, TIM0_GATE, TIM3_CH2A and UART0_TXD, also an LVD monitor source.
46 PB09 bidirectional GPIO PB09 with I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, CAN_TX, TIM2_CHB and UART0_RXD selectable via PSEL.
47 DVSS power_in Digital ground.
48 DVCC power_in Digital supply, 1.8 to 5.5V, must be at the same voltage as AVCC.

Key specifications

Parameter Value
Manufacturer HDSC
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage VCC - VSS -0.3 5.5 V includes AVCC and DVCC 46
USB module supply voltage AVCC_USB 3 3.6 V 46
Input voltage on other pins VIN -0.3 0.3 V VSS-0.3 to VCC+0.3 46
Voltage difference between supply pins /ΔVCCx/ 50 mV 46
Voltage difference between ground pins /VSSx - VSS/ 50 mV 46
LVD external input voltage range Vex 0 V 0 to VCC 50
LVD detection threshold (VTDS=0000) Vlevel 1.7 1.8 1.9 V LVD_CR.VTDS=0000 50
LVD detection threshold (VTDS=1111) Vlevel 3.2 3.3 3.4 V LVD_CR.VTDS=1111 50
LVD power consumption Icomp 0.12 μA 50
LVD response time Tresponse 80 μs 50
LVD setup time Tsetup 400 μs 50
LVD hysteresis voltage Vhyste 40 mV 50
Internal 2.5V reference voltage VREF25 2.475 2.5 2.525 V 常温25°C 3.3V 51
Internal 2.5V reference voltage VREF25 2.463 2.5 2.525 V -40 ~ 85°C 2.8 ~ 5.5V 51
Internal 1.5V reference voltage VREF15 1.485 1.5 1.515 V 常温25°C 3.3V 51
Internal 1.5V reference voltage VREF15 1.477 1.5 1.519 V -40 ~ 85°C 1.8 ~ 5.5V 51
Reference temperature coefficient TCoeff 120 ppm/°C -40 ~ 85°C 51
Run mode current, all peripherals ON, RCH 4M IDD (Run mode) 1330 1800 μA Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash 52
Run mode current, all peripherals ON, RCH 8M IDD (Run mode) 2490 3430 μA Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash 52
Run mode current, all peripherals ON, RCH 16M IDD (Run mode) 4990 6570 μA Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash 52
Run mode current, all peripherals ON, RCH 22.12M IDD (Run mode) 6760 8960 μA Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash 52
Run mode current, all peripherals ON, RCH 24M IDD (Run mode) 7260 9680 μA Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash 52
Run mode current, PLL RCH4M source 48M IDD (Run mode) 13470 15750 μA Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, FlashWait=1 52
Run mode current, all peripherals OFF, RCH 4M IDD (Run mode) 670 1080 μA All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash 52
Run mode current, all peripherals OFF, RCH 8M IDD (Run mode) 1190 1990 μA All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash 52
Run mode current, all peripherals OFF, RCH 16M IDD (Run mode) 2280 3580 μA All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash 52
Run mode current, all peripherals OFF, RCH 22.12M IDD (Run mode) 3070 4790 μA All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash 52
Operating supply voltage VCC 1.8 5.5 V 工作条件 (features/typical application) 1
Operating temperature TA -40 85 °C 工作条件 1

CAD (KiCad official)

  • Symbol: HC32F072JATA-LQ48
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: hc32f072jata-lq48-etched.step / hc32f072jata-lq48-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hc32f072jata-lq48.step / hc32f072jata-lq48.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HDSC datasheet (94 pp, sha256 125f84ad3757de4c, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF