Generated by kicad-footprint-generator · KiCad file format 20260206
HC32F072JATA-LQ48
HDSC · Other Processors and Microcontrollers (MCUs) · LQFP-48(7x7)
HC32F072JATA-LQ48 from HDSC, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCAP | power_out | LDO core supply output for internal circuits only, requires an external decoupling capacitor of at least 1uF. |
| 2 | PC13 | bidirectional | GPIO PC13 with digital functions TIM3_CH1B and I2S0_SCK and analog LVD0 input. |
| 3 | PC14/XTLI | bidirectional | GPIO PC14, also the XTL 32.768kHz crystal oscillator input XTLI. |
| 4 | PC15/XTLO | bidirectional | GPIO PC15, also the XTL 32.768kHz crystal oscillator output XTLO. |
| 5 | PF00/XTHI | bidirectional | GPIO PF00 with I2C0_SDA, CRS_SYNC and UART1_TXD, also the XTH 4-32MHz crystal oscillator input XTHI. |
| 6 | PF01/XTHO | bidirectional | GPIO PF01 with I2C0_SCL, TIM4_CHB and UART1_RXD, also the XTH 4-32MHz crystal oscillator output XTHO. |
| 7 | RESETB | input | Reset input with a non-removable weak pull-up (typ. 80kOhm), VIL max 0.3VCC and VIH min 0.7VCC. |
| 8 | AVSS | power_in | Analog ground. |
| 9 | AVCC | power_in | Analog supply, 1.8 to 5.5V, must be at the same voltage as DVCC. |
| 10 | PA00 | bidirectional | GPIO PA00 with UART1_CTS, LPUART1_TXD, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA and analog AIN0, VC0/VC1 inputs. |
| 11 | PA01 | bidirectional | GPIO PA01 with UART1_RTS, LPUART1_RXD, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI and analog AIN1, VC0/VC1 inputs. |
| 12 | PA02 | bidirectional | GPIO PA02 with UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO and analog AIN2, VC0/VC1 inputs. |
| 13 | PA03 | bidirectional | GPIO PA03 with UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A, TIM5_CHA and analog AIN3, VC0/VC1 inputs. |
| 14 | PA04 | bidirectional | GPIO PA04 with SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT, TIM3_CH2B and analog AIN4, VC inputs, OP3_OUT, DAC0_OUT. |
| 15 | PA05 | bidirectional | GPIO PA05 with SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT and XTH_OUT selectable via PSEL. |
| 16 | PA06 | bidirectional | GPIO PA06 with SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT, TIM3_GATE and LPUART0_CTS selectable via PSEL. |
| 17 | PA07 | bidirectional | GPIO PA07 with SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT and TIM4_CHB selectable via PSEL. |
| 18 | PB00 | bidirectional | GPIO PB00 with PCA_CH2, TIM3_CH1B, LPUART0_TXD, TIM5_CHB, RCH_OUT, RCL_OUT and PLL_OUT selectable via PSEL. |
| 19 | PB01 | bidirectional | GPIO PB01 with PCA_CH3, PCLK_OUT, TIM3_CH2B, TIM6_CHB, LPUART0_RTS, VC2_OUT and TCLK_OUT selectable via PSEL. |
| 20 | PB02 | bidirectional | GPIO PB02 with PCA_ECI, LPUART1_TXD, TIM4_CHA, TIM1_BK, TIM0_BK and TIM2_BK selectable via PSEL. |
| 21 | PB10 | bidirectional | GPIO PB10 with I2C1_SCL, SPI1_SCK, TIM1_CHA, LPUART0_TXD, TIM3_CH1A, LPUART1_RTS and UART1_RTS selectable via PSEL. |
| 22 | PB11 | bidirectional | GPIO PB11 with I2C1_SDA, TIM1_CHB, LPUART0_RXD, TIM2_GATE, TIM6_CHA, LPUART1_CTS and UART1_CTS selectable via PSEL. |
| 23 | DVSS | power_in | Digital ground. |
| 24 | DVCC | power_in | Digital supply, 1.8 to 5.5V, must be at the same voltage as AVCC. |
| 25 | PB12 | bidirectional | GPIO PB12 with SPI1_CS, TIM3_BK, LPUART0_TXD, TIM0_BK, LPUART0_RTS and TIM6_CHA selectable via PSEL. |
| 26 | PB13 | bidirectional | GPIO PB13 with SPI1_SCK, I2C1_SCL, TIM3_CH0B, LPUART0_CTS, TIM1_CHA, TIM1_GATE and TIM6_CHB selectable via PSEL. |
| 27 | PB14 | bidirectional | GPIO PB14 with SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA, LPUART0_RTS and TIM1_BK selectable via PSEL. |
| 28 | PB15 | bidirectional | GPIO PB15 with SPI1_MOSI, TIM3_CH2B, TIM0_CHB, TIM0_GATE and LPUART1_RXD selectable via PSEL. |
| 29 | PA08 | bidirectional | GPIO PA08 with UART0_TXD, TIM3_CH0A, CRS_SYNC, CAN_STBY, TIM1_GATE, TIM4_CHA and TIM3_BK selectable via PSEL. |
| 30 | PA09 | bidirectional | GPIO PA09 with UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT and TIM5_CHA selectable via PSEL. |
| 31 | PA10 | bidirectional | GPIO PA10 with UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT and TIM6_CHA selectable via PSEL. |
| 32 | USB_DM | bidirectional | USB full-speed device data minus signal. |
| 33 | USB_DP | bidirectional | USB full-speed device data plus signal. |
| 34 | PA13/SWDIO | bidirectional | GPIO PA13 with IR_OUT, UART0_RXD, LVD_OUT, TIM3_ETR and VC2_OUT, also the SWD data line SWDIO. |
| 35 | AVSS_USB | power_in | USB module ground. |
| 36 | AVCC_USB | power_in | USB module supply of 3.0 to 3.6V, not above AVCC/DVCC by more than 0.3V, recommended floating or grounded when USB is unused. |
| 37 | PA14/SWCLK | bidirectional | GPIO PA14 with UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT, also the SWD clock SWCLK. |
| 38 | PA15 | bidirectional | GPIO PA15 with SPI0_CS, UART1_RXD, LPUART1_RTS, TIM0_ETR, TIM0_CHA and TIM3_CH1A selectable via PSEL. |
| 39 | PB03 | bidirectional | GPIO PB03 with SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, XTL_OUT and XTH_OUT selectable via PSEL. |
| 40 | PB04 | bidirectional | GPIO PB04 with SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE and TIM3_CH0B selectable via PSEL. |
| 41 | PB05 | bidirectional | GPIO PB05 with SPI0_MOSI, TIM1_BK, PCA_CH1 and UART0_RTS selectable via PSEL. |
| 42 | PB06 | bidirectional | GPIO PB06 with I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA and TIM3_CH0A selectable via PSEL. |
| 43 | PB07 | bidirectional | GPIO PB07 with I2C0_SDA, UART0_RXD, TIM2_CHB, LPUART1_CTS and TIM0_CHB, also an LVD monitor source. |
| 44 | BOOT0 | input | BOOT0 (PF11): high at reset selects ISP programming mode, low at reset selects user mode executing Flash code. |
| 45 | PB08 | bidirectional | GPIO PB08 with I2C0_SCL, TIM1_CHA, CAN_RX, TIM2_CHA, TIM0_GATE, TIM3_CH2A and UART0_TXD, also an LVD monitor source. |
| 46 | PB09 | bidirectional | GPIO PB09 with I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, CAN_TX, TIM2_CHB and UART0_RXD selectable via PSEL. |
| 47 | DVSS | power_in | Digital ground. |
| 48 | DVCC | power_in | Digital supply, 1.8 to 5.5V, must be at the same voltage as AVCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HDSC |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VCC - VSS | -0.3 | 5.5 | V | includes AVCC and DVCC | 46 | |
| USB module supply voltage | AVCC_USB | 3 | 3.6 | V | 46 | ||
| Input voltage on other pins | VIN | -0.3 | 0.3 | V | VSS-0.3 to VCC+0.3 | 46 | |
| Voltage difference between supply pins | /ΔVCCx/ | 50 | mV | 46 | |||
| Voltage difference between ground pins | /VSSx - VSS/ | 50 | mV | 46 | |||
| LVD external input voltage range | Vex | 0 | V | 0 to VCC | 50 | ||
| LVD detection threshold (VTDS=0000) | Vlevel | 1.7 | 1.8 | 1.9 | V | LVD_CR.VTDS=0000 | 50 |
| LVD detection threshold (VTDS=1111) | Vlevel | 3.2 | 3.3 | 3.4 | V | LVD_CR.VTDS=1111 | 50 |
| LVD power consumption | Icomp | 0.12 | μA | 50 | |||
| LVD response time | Tresponse | 80 | μs | 50 | |||
| LVD setup time | Tsetup | 400 | μs | 50 | |||
| LVD hysteresis voltage | Vhyste | 40 | mV | 50 | |||
| Internal 2.5V reference voltage | VREF25 | 2.475 | 2.5 | 2.525 | V | 常温25°C 3.3V | 51 |
| Internal 2.5V reference voltage | VREF25 | 2.463 | 2.5 | 2.525 | V | -40 ~ 85°C 2.8 ~ 5.5V | 51 |
| Internal 1.5V reference voltage | VREF15 | 1.485 | 1.5 | 1.515 | V | 常温25°C 3.3V | 51 |
| Internal 1.5V reference voltage | VREF15 | 1.477 | 1.5 | 1.519 | V | -40 ~ 85°C 1.8 ~ 5.5V | 51 |
| Reference temperature coefficient | TCoeff | 120 | ppm/°C | -40 ~ 85°C | 51 | ||
| Run mode current, all peripherals ON, RCH 4M | IDD (Run mode) | 1330 | 1800 | μA | Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash | 52 | |
| Run mode current, all peripherals ON, RCH 8M | IDD (Run mode) | 2490 | 3430 | μA | Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash | 52 | |
| Run mode current, all peripherals ON, RCH 16M | IDD (Run mode) | 4990 | 6570 | μA | Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash | 52 | |
| Run mode current, all peripherals ON, RCH 22.12M | IDD (Run mode) | 6760 | 8960 | μA | Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash | 52 | |
| Run mode current, all peripherals ON, RCH 24M | IDD (Run mode) | 7260 | 9680 | μA | Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, run while(1) in Flash | 52 | |
| Run mode current, PLL RCH4M source 48M | IDD (Run mode) | 13470 | 15750 | μA | Vcap=1.5V, VCC=1.8-5.5V, TA=-40~85C, FlashWait=1 | 52 | |
| Run mode current, all peripherals OFF, RCH 4M | IDD (Run mode) | 670 | 1080 | μA | All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash | 52 | |
| Run mode current, all peripherals OFF, RCH 8M | IDD (Run mode) | 1190 | 1990 | μA | All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash | 52 | |
| Run mode current, all peripherals OFF, RCH 16M | IDD (Run mode) | 2280 | 3580 | μA | All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash | 52 | |
| Run mode current, all peripherals OFF, RCH 22.12M | IDD (Run mode) | 3070 | 4790 | μA | All peripherals clock OFF, Vcap=1.5V, VCC=1.8-5.5V, run while(1) in Flash | 52 | |
| Operating supply voltage | VCC | 1.8 | 5.5 | V | 工作条件 (features/typical application) | 1 | |
| Operating temperature | TA | -40 | 85 | °C | 工作条件 | 1 |
CAD (KiCad official)
- Symbol:
HC32F072JATA-LQ48 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
hc32f072jata-lq48-etched.step/hc32f072jata-lq48-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hc32f072jata-lq48.step/hc32f072jata-lq48.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HDSC datasheet (94 pp, sha256
125f84ad3757de4c, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).