Generated by kicad-footprint-generator · KiCad file format 20260206
HC-GH-13PLT-05
HCTL · Wire To Board Connector · JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical
HC-GH-13PLT-05 from HCTL, in a JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
| 9 | 9 | passive | Contact 9; numbering follows the footprint. |
| 10 | 10 | passive | Contact 10; numbering follows the footprint. |
| 11 | 11 | passive | Contact 11; numbering follows the footprint. |
| 12 | 12 | passive | Contact 12; numbering follows the footprint. |
| 13 | 13 | passive | Contact 13; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HCTL |
| Package | JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical |
| Category | Connectors |
| Pins | 13 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated voltage | 50 | V | AC, DC | 17 | |||
| Rated current | 1 | A | AC, DC | 17 | |||
| Operating ambient temperature range | -25 | 85 | ℃ | Ambient temperature range | 3 | ||
| Contact resistance (initial) | 30 | mΩ | Mate connector; max 20 mV and max 100 mA applied | 5 | |||
| Leakage current (withstand voltage test) | 0.5 | mA | 500 V AC(rms) for 1 min between adjacent terminals and ground of mate connectors | 5 | |||
| Current discontinuity (vibration) | 1 | µsec | Mate connectors during vibration test (1.5 mm p-p, 10-55-10 Hz, 2 h per axis) | 7 | |||
| Terminal crimp wire pull-out force, AWG#26 | 20 | N | Axial pull-out at 25±3 mm/min, AWG#26 wire | 6 | |||
| Terminal crimp wire pull-out force, AWG#28 | 13 | N | Axial pull-out at 25±3 mm/min, AWG#28 wire | 6 | |||
| Terminal crimp wire pull-out force, AWG#30 | 8 | N | Axial pull-out at 25±3 mm/min, AWG#30 wire | 6 | |||
| Single contact withdrawal force | 0.3 | N | Pull-out at 25±3 mm/min along wire direction | 6 | |||
| Fixed terminals and hole seat force | 7 | N | Pull-out at 25±3 mm/min | 6 | |||
| Single contact insertion force | 2 | N | Mating at 25±3 mm/min | 6 | |||
| Pin retention (seat pull-out) force | 5 | N | Force on pin end at 25±3 mm/min until pin exits seat | 6 | |||
| Contact resistance after durability | 40 | mΩ | 30 cycles at max 10 cycles/min, before environmental test | 7 | |||
| Contact resistance after thermal aging | 40 | mΩ | 85±2℃, 96 hours continuously | 8 | |||
| Temperature rise at maximum rated current | 30 | ℃ | Maximum rated current passed through mate connector | 8 | |||
| Contact resistance after humidity test | 40 | mΩ | 40±2℃, RH 90-95%, 96 hours continuously | 9 | |||
| Insulation resistance after humidity test | 100 | mΩ | 40±2℃, RH 90-95%, 96 hours continuously (as printed) | 9 | |||
| Contact resistance after temperature cycling | 40 | mΩ | -55±3℃ 30 min and 85±3℃ 30 min, 5 cycles (requirement 'same as 8.3') | 9 | |||
| Contact resistance after salt spray | 40 | mΩ | 35±3℃, solution 5±1%; 48 h if stamped before tin plating, 8 h if stamped after | 10 | |||
| Solderability (wetted area) | 90 | % | Solder temperature 245±5℃, immersion 3±0.5 s | 10 | |||
| Storage temperature (packaged) | -20 | 40 | ℃ | Packaged product in warehouse, no acidic/alkaline/corrosive gas | 14 | ||
| Storage relative humidity (packaged) | 80 | % | Packaged product storage, -20 to +40℃ | 14 | |||
| Transport temperature | -20 | 50 | ℃ | Transport; moisture-proof, no mechanical damage | 14 | ||
| Exposure temperature after package opened | 30 | ℃ | Use all within 24 h after opening | 13 | |||
| Exposure humidity after package opened | 60 | %RH | Use all within 24 h after opening | 13 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Nylon | 7、Material: Housing Nylon66 UL94-VO(2) 2 HC-GH-2Y-05 1.25 34567 | 16 | |
| contacts | Brass | tin | PIN Brass Tin-plated | 17 |
CAD (KiCad official)
- Symbol:
HC-GH-13PLT-05 - Footprint:
Connector_JST:JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical - 3D model: JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HCTL datasheet (18 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).