Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HC-GH-13PLT-05

HCTL · Wire To Board Connector · JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical

HC-GH-13PLT-05 from HCTL, in a JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.
3 3 passive Contact 3; numbering follows the footprint.
4 4 passive Contact 4; numbering follows the footprint.
5 5 passive Contact 5; numbering follows the footprint.
6 6 passive Contact 6; numbering follows the footprint.
7 7 passive Contact 7; numbering follows the footprint.
8 8 passive Contact 8; numbering follows the footprint.
9 9 passive Contact 9; numbering follows the footprint.
10 10 passive Contact 10; numbering follows the footprint.
11 11 passive Contact 11; numbering follows the footprint.
12 12 passive Contact 12; numbering follows the footprint.
13 13 passive Contact 13; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer HCTL
Package JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical
Category Connectors
Pins 13

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated voltage 50 V AC, DC 17
Rated current 1 A AC, DC 17
Operating ambient temperature range -25 85 ℃ Ambient temperature range 3
Contact resistance (initial) 30 mΩ Mate connector; max 20 mV and max 100 mA applied 5
Leakage current (withstand voltage test) 0.5 mA 500 V AC(rms) for 1 min between adjacent terminals and ground of mate connectors 5
Current discontinuity (vibration) 1 µsec Mate connectors during vibration test (1.5 mm p-p, 10-55-10 Hz, 2 h per axis) 7
Terminal crimp wire pull-out force, AWG#26 20 N Axial pull-out at 25±3 mm/min, AWG#26 wire 6
Terminal crimp wire pull-out force, AWG#28 13 N Axial pull-out at 25±3 mm/min, AWG#28 wire 6
Terminal crimp wire pull-out force, AWG#30 8 N Axial pull-out at 25±3 mm/min, AWG#30 wire 6
Single contact withdrawal force 0.3 N Pull-out at 25±3 mm/min along wire direction 6
Fixed terminals and hole seat force 7 N Pull-out at 25±3 mm/min 6
Single contact insertion force 2 N Mating at 25±3 mm/min 6
Pin retention (seat pull-out) force 5 N Force on pin end at 25±3 mm/min until pin exits seat 6
Contact resistance after durability 40 mΩ 30 cycles at max 10 cycles/min, before environmental test 7
Contact resistance after thermal aging 40 mΩ 85±2℃, 96 hours continuously 8
Temperature rise at maximum rated current 30 ℃ Maximum rated current passed through mate connector 8
Contact resistance after humidity test 40 mΩ 40±2℃, RH 90-95%, 96 hours continuously 9
Insulation resistance after humidity test 100 mΩ 40±2℃, RH 90-95%, 96 hours continuously (as printed) 9
Contact resistance after temperature cycling 40 mΩ -55±3℃ 30 min and 85±3℃ 30 min, 5 cycles (requirement 'same as 8.3') 9
Contact resistance after salt spray 40 mΩ 35±3℃, solution 5±1%; 48 h if stamped before tin plating, 8 h if stamped after 10
Solderability (wetted area) 90 % Solder temperature 245±5℃, immersion 3±0.5 s 10
Storage temperature (packaged) -20 40 ℃ Packaged product in warehouse, no acidic/alkaline/corrosive gas 14
Storage relative humidity (packaged) 80 % Packaged product storage, -20 to +40℃ 14
Transport temperature -20 50 ℃ Transport; moisture-proof, no mechanical damage 14
Exposure temperature after package opened 30 ℃ Use all within 24 h after opening 13
Exposure humidity after package opened 60 %RH Use all within 24 h after opening 13

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Nylon 7、Material: Housing Nylon66 UL94-VO(2) 2 HC-GH-2Y-05 1.25 34567 16
contacts Brass tin PIN Brass Tin-plated 17

CAD (KiCad official)

  • Symbol: HC-GH-13PLT-05
  • Footprint: Connector_JST:JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical
  • 3D model: JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HCTL datasheet (18 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF