main
Ray
Publish 0.1.0
c386999
HBLS0603-5N1S
HYHONGYEX · Inductors (SMD) · 0201
HBLS0603-5N1S from HYHONGYEX, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HYHONGYEX |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code S, ±0.3 nH) around nominal 5.1 nH | L | -0.3 | 5.1 | 0.3 | nH | Tolerance code S = ±0.3 nH; nominal HBLS0603-5N1□ | 10 |
| Minimum quality factor Q | Q | 13 | - | L,Q test frequency 500 MHz | 10 | ||
| Minimum self resonant frequency | S.R.F | 5900 | MHz | 10 | |||
| Maximum DC resistance | DCR | 0.46 | Ω | 10 | |||
| Maximum rated current | Ir | 210 | mA | 10 | |||
| Inductance decrease at rated DC current | 5 | % | At rated DC current (Ir) | 4 | |||
| Inductance change after bend test | L | -20 | 20 | % | Board bent 2 mm, held 10 s | 5 | |
| Inductance change after vibration test | L | -20 | 20 | % | Sine 10-55-10 Hz, 1.5 mm peak-peak, X/Y/Z, 2 h per axis | 5 | |
| Inductance change after temperature shock | L | -20 | 20 | % | -40 °C and +85 °C, 30 min each, 5 cycles | 5 | |
| Inductance change after humidity resistance load | L | -20 | 20 | % | 90-95% RH, 60±2 °C, rated current, 1000 h | 5 | |
| Inductance change after high temperature load | L | -20 | 20 | % | +85±2 °C, rated current, 1000 h | 5 | |
| Inductance change after low temperature storage | L | -20 | 20 | % | -40±2 °C, 1000 h | 5 | |
| Operating temperature range | -40 | 85 | °C | 3 | |||
| Storage temperature range | -10 | 40 | °C | 70% RH | 3 | ||
| Reflow preheat temperature difference between solder and ferrite surface | 150 | °C | Preheating before reflow | 8 | |||
| Reflow cooling temperature difference | 100 | °C | Cooling into solvent after soldering | 8 | |||
| Rework soldering iron tip temperature | 280 | °C | Rework with soldering iron, limited to one time | 9 | |||
| Rework soldering iron output power | 30 | W | Rework with soldering iron | 9 | |||
| Rework soldering time | 3 | s | Rework with soldering iron, preheat 150 °C 1 min | 9 |
CAD (KiCad official)
- Symbol:
HBLS0603-5N1S - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HYHONGYEX datasheet (15 pp, sha256
d513d53215c5d585, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HBLS0603-5N1S
**HYHONGYEX** · Inductors (SMD) · 0201
HBLS0603-5N1S from HYHONGYEX, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HYHONGYEX |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code S, ±0.3 nH) around nominal 5.1 nH | L | -0.3 | 5.1 | 0.3 | nH | Tolerance code S = ±0.3 nH; nominal HBLS0603-5N1□ | 10 |
| Minimum quality factor Q | Q | 13 | | | - | L,Q test frequency 500 MHz | 10 |
| Minimum self resonant frequency | S.R.F | 5900 | | | MHz | | 10 |
| Maximum DC resistance | DCR | | | 0.46 | Ω | | 10 |
| Maximum rated current | Ir | | | 210 | mA | | 10 |
| Inductance decrease at rated DC current | | | | 5 | % | At rated DC current (Ir) | 4 |
| Inductance change after bend test | L | -20 | | 20 | % | Board bent 2 mm, held 10 s | 5 |
| Inductance change after vibration test | L | -20 | | 20 | % | Sine 10-55-10 Hz, 1.5 mm peak-peak, X/Y/Z, 2 h per axis | 5 |
| Inductance change after temperature shock | L | -20 | | 20 | % | -40 °C and +85 °C, 30 min each, 5 cycles | 5 |
| Inductance change after humidity resistance load | L | -20 | | 20 | % | 90-95% RH, 60±2 °C, rated current, 1000 h | 5 |
| Inductance change after high temperature load | L | -20 | | 20 | % | +85±2 °C, rated current, 1000 h | 5 |
| Inductance change after low temperature storage | L | -20 | | 20 | % | -40±2 °C, 1000 h | 5 |
| Operating temperature range | | -40 | | 85 | °C | | 3 |
| Storage temperature range | | -10 | | 40 | °C | 70% RH | 3 |
| Reflow preheat temperature difference between solder and ferrite surface | | | | 150 | °C | Preheating before reflow | 8 |
| Reflow cooling temperature difference | | | | 100 | °C | Cooling into solvent after soldering | 8 |
| Rework soldering iron tip temperature | | | | 280 | °C | Rework with soldering iron, limited to one time | 9 |
| Rework soldering iron output power | | | | 30 | W | Rework with soldering iron | 9 |
| Rework soldering time | | | | 3 | s | Rework with soldering iron, preheat 150 °C 1 min | 9 |
## CAD (KiCad official)
- Symbol: `HBLS0603-5N1S`
- Footprint: `Inductor_SMD:L_0201_0603Metric`
- 3D model: 0201 (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HYHONGYEX datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590165743875887105) (15 pp, sha256 `d513d53215c5d585`, retrieved 2026-10-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hbls0603-5n1s-datasheet.pdf)