Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HBLS0603-5N1S

HYHONGYEX · Inductors (SMD) · 0201

HBLS0603-5N1S from HYHONGYEX, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer HYHONGYEX
Package 0201
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance (code S, ±0.3 nH) around nominal 5.1 nH L -0.3 5.1 0.3 nH Tolerance code S = ±0.3 nH; nominal HBLS0603-5N1□ 10
Minimum quality factor Q Q 13 - L,Q test frequency 500 MHz 10
Minimum self resonant frequency S.R.F 5900 MHz 10
Maximum DC resistance DCR 0.46 Ω 10
Maximum rated current Ir 210 mA 10
Inductance decrease at rated DC current 5 % At rated DC current (Ir) 4
Inductance change after bend test L -20 20 % Board bent 2 mm, held 10 s 5
Inductance change after vibration test L -20 20 % Sine 10-55-10 Hz, 1.5 mm peak-peak, X/Y/Z, 2 h per axis 5
Inductance change after temperature shock L -20 20 % -40 °C and +85 °C, 30 min each, 5 cycles 5
Inductance change after humidity resistance load L -20 20 % 90-95% RH, 60±2 °C, rated current, 1000 h 5
Inductance change after high temperature load L -20 20 % +85±2 °C, rated current, 1000 h 5
Inductance change after low temperature storage L -20 20 % -40±2 °C, 1000 h 5
Operating temperature range -40 85 °C 3
Storage temperature range -10 40 °C 70% RH 3
Reflow preheat temperature difference between solder and ferrite surface 150 °C Preheating before reflow 8
Reflow cooling temperature difference 100 °C Cooling into solvent after soldering 8
Rework soldering iron tip temperature 280 °C Rework with soldering iron, limited to one time 9
Rework soldering iron output power 30 W Rework with soldering iron 9
Rework soldering time 3 s Rework with soldering iron, preheat 150 °C 1 min 9

CAD (KiCad official)

  • Symbol: HBLS0603-5N1S
  • Footprint: Inductor_SMD:L_0201_0603Metric
  • 3D model: 0201 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HYHONGYEX datasheet (15 pp, sha256 d513d53215c5d585, retrieved 2026-10-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF