Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
HBLS0603-3N0S
HYHONGYEX · Inductors (SMD) · 0201
HBLS0603-3N0S from HYHONGYEX, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HYHONGYEX |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code S) | L | -0.3 | 0.3 | nH | Tolerance code S = ±0.3nH per part-number tolerance table | 3 | |
| Minimum Q | Q | 13 | - | Test freq 500 MHz; test signal -40dBm or 100mV | 10 | ||
| Minimum self-resonant frequency | S.R.F | 8600 | MHz | 10 | |||
| Maximum DC resistance | DCR | 0.26 | Ω | 10 | |||
| Maximum rated current | Ir | 280 | mA | 10 | |||
| Inductance decrease at rated current | L | -5 | % | At rated DC current (Ir); inductance decrease not to exceed 5% | 4 | ||
| Inductance change after reliability tests | L | -20 | 20 | % | After bend, vibration, temperature shock, humidity load, high-temperature load, low-temperature storage and salt mist tests (section 6); inductance shall be within ±20% of initial value | 5 | |
| Operating temperature range | -40 | 85 | °C | Operating temperature range | 3 | ||
| Reflow preheat temperature difference | 150 | °C | Preheat: temperature difference between solder and ferrite surface, max | 8 | |||
| Reflow cooling temperature difference | 100 | °C | After soldering: cooling temperature difference, max | 8 | |||
| Rework soldering iron tip temperature | 280 | °C | Rework with soldering iron; preheat 150°C, 1 min; soldering time 3 s max; rework limited to one time | 9 | |||
| Nominal inductance | L | 3 | nH | Test freq 500 MHz; test signal -40dBm or 100mV | 10 | ||
| Typical Q at 0.5 GHz | Q | 17 | - | Typical Q@Freq 0.5 GHz | 10 | ||
| Typical Q at 0.8 GHz | Q | 22 | - | Typical Q@Freq 0.8 GHz | 10 | ||
| Typical Q at 1.8 GHz | Q | 34 | - | Typical Q@Freq 1.8 GHz | 10 | ||
| Typical Q at 2.0 GHz | Q | 35 | - | Typical Q@Freq 2.0 GHz | 10 | ||
| Typical Q at 2.4 GHz | Q | 39 | - | Typical Q@Freq 2.4 GHz | 10 |
CAD (KiCad official)
- Symbol:
HBLS0603-3N0S - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HYHONGYEX datasheet (15 pp, sha256
a8ca30bfffa0f357, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).