Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HBLS0603-3N0S

HYHONGYEX · Inductors (SMD) · 0201

HBLS0603-3N0S from HYHONGYEX, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer HYHONGYEX
Package 0201
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance (code S) L -0.3 0.3 nH Tolerance code S = ±0.3nH per part-number tolerance table 3
Minimum Q Q 13 - Test freq 500 MHz; test signal -40dBm or 100mV 10
Minimum self-resonant frequency S.R.F 8600 MHz 10
Maximum DC resistance DCR 0.26 Ω 10
Maximum rated current Ir 280 mA 10
Inductance decrease at rated current L -5 % At rated DC current (Ir); inductance decrease not to exceed 5% 4
Inductance change after reliability tests L -20 20 % After bend, vibration, temperature shock, humidity load, high-temperature load, low-temperature storage and salt mist tests (section 6); inductance shall be within ±20% of initial value 5
Operating temperature range -40 85 °C Operating temperature range 3
Reflow preheat temperature difference 150 °C Preheat: temperature difference between solder and ferrite surface, max 8
Reflow cooling temperature difference 100 °C After soldering: cooling temperature difference, max 8
Rework soldering iron tip temperature 280 °C Rework with soldering iron; preheat 150°C, 1 min; soldering time 3 s max; rework limited to one time 9
Nominal inductance L 3 nH Test freq 500 MHz; test signal -40dBm or 100mV 10
Typical Q at 0.5 GHz Q 17 - Typical Q@Freq 0.5 GHz 10
Typical Q at 0.8 GHz Q 22 - Typical Q@Freq 0.8 GHz 10
Typical Q at 1.8 GHz Q 34 - Typical Q@Freq 1.8 GHz 10
Typical Q at 2.0 GHz Q 35 - Typical Q@Freq 2.0 GHz 10
Typical Q at 2.4 GHz Q 39 - Typical Q@Freq 2.4 GHz 10

CAD (KiCad official)

  • Symbol: HBLS0603-3N0S
  • Footprint: Inductor_SMD:L_0201_0603Metric
  • 3D model: 0201 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HYHONGYEX datasheet (15 pp, sha256 a8ca30bfffa0f357, retrieved 2026-10-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF