main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers had8572arz: viewers rendered from the public page · Ray
had8572arz-etched.glb Publish 0.1.0 · Ray
had8572arz-etched.step had8572arz: factory component page (tier=lcsc) · Ray
had8572arz-hero.glb had8572arz: hero GLB from the etched model (keeps the MPN mark) · Ray
had8572arz-hero.overlay.json had8572arz: hero GLB from the etched model (keeps the MPN mark) · Ray
had8572arz.glb Publish 0.1.0 · Ray
had8572arz.kicad_mod Publish 0.1.0 · Ray
had8572arz.kicad_sym Publish 0.1.0 · Ray
had8572arz.lbr Publish 0.1.0 · Ray
had8572arz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

HAD8572ARZ-REEL7

HXY MOSFET · Operational Amplifier · SOP-8

HAD8572ARZ-REEL7 from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output; the datasheet gives no output-specific limit, only that continuous output short-circuit is permitted under the absolute maximum ratings.
2 -IN A input Inverting input of amplifier A, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings.
3 +IN A input Non-inverting input of amplifier A, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings.
4 -VS power_in Negative (lowest) power supply, with the total supply voltage VS+ to VS- limited to 10.0 V absolute maximum and 2.0 V to 5.5 V specified operation.
5 +IN B input Non-inverting input of amplifier B, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings.
6 -IN B input Inverting input of amplifier B, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings.
7 OUT B output Amplifier B output; the datasheet gives no output-specific limit, only that continuous output short-circuit is permitted under the absolute maximum ratings.
8 +VS power_in Positive (highest) power supply, with the total supply voltage VS+ to VS- limited to 10.0 V absolute maximum and 2.0 V to 5.5 V specified operation.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -8 0.5 8 µV 3
Offset voltage drift VOS TC -40 5 40 nV/℃ TA = −40 to +125 ℃ 3
Power supply rejection ratio PSRR 112 126 dB VS = 2.0 to 5.5 V, VCM < VS+ − 2V 3
Power supply rejection ratio (over temperature) PSRR 106 dB VS = 2.0 to 5.5 V, VCM < VS+ − 2V; TA = −40 to +125 ℃ 3
Input bias current IB 370 pA TA = 0 to +85 ℃ 3
Input bias current (over temperature) IB 800 pA TA = −40 to +125 ℃ 3
Input offset current IOS 800 pA TA = 0 to +85 ℃ 3
Input offset current (over temperature) IOS 1000 pA TA = −40 to +125 ℃ 3
Common-mode voltage range VCM -0.1 0.1 V Referenced to VS− (min) and VS+ (max) rails 3
Common-mode rejection ratio CMRR 112 130 dB VS = 5.5 V, VCM = −0.1 to 5.5 V 3
Common-mode rejection ratio (over temperature) CMRR 106 dB VCM = 0 to 5.3 V, TA = −40 to +125 ℃ 3
Common-mode rejection ratio CMRR 102 122 dB VS = 2.0 V, VCM = −0.1 to 2.0 V 3
Common-mode rejection ratio (over temperature) CMRR 96 dB VCM = 0 to 1.8 V, TA = −40 to +125 ℃ 3
Open-loop voltage gain AVOL 108 128 dB RL = 10 kΩ, VO = 0.05 to 3.5 V 3
Open-loop voltage gain (over temperature) AVOL 102 dB TA = −40 to +125 ℃ 3
Open-loop voltage gain AVOL 96 116 dB RL = 600 Ω, VO = 0.15 to 3.5 V 3
Open-loop voltage gain (over temperature) AVOL 90 dB TA = −40 to +125 ℃ 3
Output high voltage swing (below VS+) VOH 12 15 mV RL = 10 kΩ 4
Output high voltage swing (below VS+), load current VOH 50 60 mV ILOAD = 1 mA, source current 4
Output low voltage swing (above VS−) VOL 9 12 mV RL = 10 kΩ 4
Output low voltage swing (above VS−), load current VOL 32 40 mV ILOAD = 1 mA, sink current 4
Short-circuit current ISC 40 50 mA Source and sink current through 10 Ω 4
Operating supply voltage VS 1.8 5.5 V TA = 0 to +70 ℃ 4
Operating supply voltage VS 2 5.5 V TA = −40 to +125 ℃ 4
Quiescent current (per amplifier) IQ 80 110 140 µA 4
Operating temperature range TA -40 125 ℃ 4
Supply voltage, VS+ to VS− 10 V 2
Signal input terminals voltage -0.5 0.5 V Referenced to VS− (min) and VS+ (max) rails 2
Signal input terminals current -20 20 mA 2
Storage temperature range Tstg -65 150 ℃ 2
Junction temperature TJ 150 ℃ 2
Lead temperature range (soldering) 260 ℃ Soldering 10 sec 2
ESD human body model -5000 5000 V HBM per MIL-STD-883J / Method 3015.9 2
ESD charged device model -2000 2000 V CDM per ESDA/JEDEC JS-002-2014 2
ESD machine model -250 250 V MM per JESD22-A115C 2
Input voltage noise (0.01 to 1 Hz) Vn 0.1 µVP-P f = 0.01 to 1 Hz 3
Input voltage noise (0.1 to 10 Hz) Vn 0.45 µVP-P f = 0.1 to 10 Hz 3
Input voltage noise density en 27 nV/√Hz f = 10 kHz 3
Input voltage noise density en 30 nV/√Hz f = 1 kHz 3
Input current noise density In 10 fA/√Hz f = 1 kHz 3
Input resistance RIN 100 GΩ 3
Input capacitance, differential CIN 2 pF Differential 3
Input capacitance, common mode CIN 3.5 pF Common mode 3
Gain bandwidth product GBW 1.5 MHz f = 1 kHz 3
Slew rate SR 1.2 V/µs G = +1, CL = 100 pF, VO = 1.5 to 3.5 V 3
Settling time tS 1.2 µs To 0.1%, G = +1, 1V step 4
Settling time tS 1.5 µs To 0.01%, G = +1, 1V step 4
Overload recovery time tOR 35 µs To 0.1%, VIN * Gain > VS 4
Input bias current (typical) IB 70 pA 3
Input offset current (typical) IOS 100 pA 3
Open-loop output impedance ZOUT 2 kΩ f = 350 kHz, IO = 0 4
Package thermal resistance, SOP-8 125 ℃/W 4

CAD (KiCad official)

  • Symbol: HAD8572ARZ-REEL7
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: had8572arz-etched.step / had8572arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); had8572arz.step / had8572arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (17 pp, sha256 bbacdccaaa7bd791, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF