3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHAD8572ARZ-REEL7
HXY MOSFET · Operational Amplifier · SOP-8
HAD8572ARZ-REEL7 from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output; the datasheet gives no output-specific limit, only that continuous output short-circuit is permitted under the absolute maximum ratings. |
| 2 | -IN A | input | Inverting input of amplifier A, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings. |
| 3 | +IN A | input | Non-inverting input of amplifier A, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings. |
| 4 | -VS | power_in | Negative (lowest) power supply, with the total supply voltage VS+ to VS- limited to 10.0 V absolute maximum and 2.0 V to 5.5 V specified operation. |
| 5 | +IN B | input | Non-inverting input of amplifier B, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings. |
| 6 | -IN B | input | Inverting input of amplifier B, with signal input voltage limited to VS- - 0.5 V to VS+ + 0.5 V and ±20 mA current per the absolute maximum ratings. |
| 7 | OUT B | output | Amplifier B output; the datasheet gives no output-specific limit, only that continuous output short-circuit is permitted under the absolute maximum ratings. |
| 8 | +VS | power_in | Positive (highest) power supply, with the total supply voltage VS+ to VS- limited to 10.0 V absolute maximum and 2.0 V to 5.5 V specified operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -8 | 0.5 | 8 | µV | 3 | |
| Offset voltage drift | VOS TC | -40 | 5 | 40 | nV/℃ | TA = −40 to +125 ℃ | 3 |
| Power supply rejection ratio | PSRR | 112 | 126 | dB | VS = 2.0 to 5.5 V, VCM < VS+ − 2V | 3 | |
| Power supply rejection ratio (over temperature) | PSRR | 106 | dB | VS = 2.0 to 5.5 V, VCM < VS+ − 2V; TA = −40 to +125 ℃ | 3 | ||
| Input bias current | IB | 370 | pA | TA = 0 to +85 ℃ | 3 | ||
| Input bias current (over temperature) | IB | 800 | pA | TA = −40 to +125 ℃ | 3 | ||
| Input offset current | IOS | 800 | pA | TA = 0 to +85 ℃ | 3 | ||
| Input offset current (over temperature) | IOS | 1000 | pA | TA = −40 to +125 ℃ | 3 | ||
| Common-mode voltage range | VCM | -0.1 | 0.1 | V | Referenced to VS− (min) and VS+ (max) rails | 3 | |
| Common-mode rejection ratio | CMRR | 112 | 130 | dB | VS = 5.5 V, VCM = −0.1 to 5.5 V | 3 | |
| Common-mode rejection ratio (over temperature) | CMRR | 106 | dB | VCM = 0 to 5.3 V, TA = −40 to +125 ℃ | 3 | ||
| Common-mode rejection ratio | CMRR | 102 | 122 | dB | VS = 2.0 V, VCM = −0.1 to 2.0 V | 3 | |
| Common-mode rejection ratio (over temperature) | CMRR | 96 | dB | VCM = 0 to 1.8 V, TA = −40 to +125 ℃ | 3 | ||
| Open-loop voltage gain | AVOL | 108 | 128 | dB | RL = 10 kΩ, VO = 0.05 to 3.5 V | 3 | |
| Open-loop voltage gain (over temperature) | AVOL | 102 | dB | TA = −40 to +125 ℃ | 3 | ||
| Open-loop voltage gain | AVOL | 96 | 116 | dB | RL = 600 Ω, VO = 0.15 to 3.5 V | 3 | |
| Open-loop voltage gain (over temperature) | AVOL | 90 | dB | TA = −40 to +125 ℃ | 3 | ||
| Output high voltage swing (below VS+) | VOH | 12 | 15 | mV | RL = 10 kΩ | 4 | |
| Output high voltage swing (below VS+), load current | VOH | 50 | 60 | mV | ILOAD = 1 mA, source current | 4 | |
| Output low voltage swing (above VS−) | VOL | 9 | 12 | mV | RL = 10 kΩ | 4 | |
| Output low voltage swing (above VS−), load current | VOL | 32 | 40 | mV | ILOAD = 1 mA, sink current | 4 | |
| Short-circuit current | ISC | 40 | 50 | mA | Source and sink current through 10 Ω | 4 | |
| Operating supply voltage | VS | 1.8 | 5.5 | V | TA = 0 to +70 ℃ | 4 | |
| Operating supply voltage | VS | 2 | 5.5 | V | TA = −40 to +125 ℃ | 4 | |
| Quiescent current (per amplifier) | IQ | 80 | 110 | 140 | µA | 4 | |
| Operating temperature range | TA | -40 | 125 | ℃ | 4 | ||
| Supply voltage, VS+ to VS− | 10 | V | 2 | ||||
| Signal input terminals voltage | -0.5 | 0.5 | V | Referenced to VS− (min) and VS+ (max) rails | 2 | ||
| Signal input terminals current | -20 | 20 | mA | 2 | |||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 2 | ||
| Junction temperature | TJ | 150 | ℃ | 2 | |||
| Lead temperature range (soldering) | 260 | ℃ | Soldering 10 sec | 2 | |||
| ESD human body model | -5000 | 5000 | V | HBM per MIL-STD-883J / Method 3015.9 | 2 | ||
| ESD charged device model | -2000 | 2000 | V | CDM per ESDA/JEDEC JS-002-2014 | 2 | ||
| ESD machine model | -250 | 250 | V | MM per JESD22-A115C | 2 | ||
| Input voltage noise (0.01 to 1 Hz) | Vn | 0.1 | µVP-P | f = 0.01 to 1 Hz | 3 | ||
| Input voltage noise (0.1 to 10 Hz) | Vn | 0.45 | µVP-P | f = 0.1 to 10 Hz | 3 | ||
| Input voltage noise density | en | 27 | nV/√Hz | f = 10 kHz | 3 | ||
| Input voltage noise density | en | 30 | nV/√Hz | f = 1 kHz | 3 | ||
| Input current noise density | In | 10 | fA/√Hz | f = 1 kHz | 3 | ||
| Input resistance | RIN | 100 | GΩ | 3 | |||
| Input capacitance, differential | CIN | 2 | pF | Differential | 3 | ||
| Input capacitance, common mode | CIN | 3.5 | pF | Common mode | 3 | ||
| Gain bandwidth product | GBW | 1.5 | MHz | f = 1 kHz | 3 | ||
| Slew rate | SR | 1.2 | V/µs | G = +1, CL = 100 pF, VO = 1.5 to 3.5 V | 3 | ||
| Settling time | tS | 1.2 | µs | To 0.1%, G = +1, 1V step | 4 | ||
| Settling time | tS | 1.5 | µs | To 0.01%, G = +1, 1V step | 4 | ||
| Overload recovery time | tOR | 35 | µs | To 0.1%, VIN * Gain > VS | 4 | ||
| Input bias current (typical) | IB | 70 | pA | 3 | |||
| Input offset current (typical) | IOS | 100 | pA | 3 | |||
| Open-loop output impedance | ZOUT | 2 | kΩ | f = 350 kHz, IO = 0 | 4 | ||
| Package thermal resistance, SOP-8 | 125 | ℃/W | 4 |
CAD (KiCad official)
- Symbol:
HAD8572ARZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
had8572arz-etched.step/had8572arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);had8572arz.step/had8572arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (17 pp, sha256
bbacdccaaa7bd791, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).