main
Ray
Publish 0.1.0
2bef616
GZP6847A201KPP50K
Sencoch Semiconductor · Pressure Sensors · DIP-6
GZP6847A201KPP50K from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Pin 1 is labeled NC with function 'no definition' (无定义) in the electrical connection table, so it is not used. |
| 2 | VDD | power_in | Supply pin; the datasheet gives a 3.0 to 5.5 V supply range with a nominal (5 ± 0.25) V DC, only one of VDD pins 2 or 4 needs to be connected, and an overvoltage of 6.5 Vdc may destroy the circuit chip. |
| 3 | GND | power_in | Ground pin; only one of GND pins 3 or 6 needs to be connected, and the product has no reverse-polarity protection, so supply polarity must be observed. |
| 4 | VDD | power_in | Second supply pin, electrically the same as pin 2; only one of VDD pins 2 or 4 needs to be connected, and a 0.1 uF capacitor between VDD and GND is recommended by the datasheet. |
| 5 | OUT | output | Analog pressure output, standard 0.5 to 4.5 V (customizable) ratiometric to supply, with an output current load of 5 mA stated in the electrical characteristics. |
| 6 | GND | power_in | Second ground pin, electrically the same as pin 3; only one of GND pins 3 or 6 needs to be connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy (linearity, repeatability, hysteresis, 0-70°C) | -1 | 1 | %Span | 0~70℃ output error; printed ±1 %Span | 5 | ||
| Zero point temperature drift | -0.03 | 0.03 | %FS/℃ | printed ±0.03 %FS/℃ | 5 | ||
| Full-scale temperature drift | -0.03 | 0.03 | %FS/℃ | printed ±0.03 %FS/℃ | 5 | ||
| Output signal range | 0.5 | 4.5 | V | 5V supply, 0.5~4.5 V output (customizable) | 5 | ||
| Supply voltage (electrical table row) | 5.5 | V | 典型值参照出厂配置 | 5 | |||
| Supply voltage (product features) | 3 | 5.5 | V | 3.0~5.5V 供电 per product features | 4 | ||
| Performance reference supply | -0.25 | 5 | 0.25 | V | performance spec supply (5±0.25) V DC; reference temperature 25℃ | 4 | |
| Operating current | 1700 | uA | @25℃ | 5 | |||
| Filter capacitor | 100 | nF | 5 | ||||
| PSRR | 60 | dB | 5 | ||||
| Output load current | 5 | mA | 5 | ||||
| Input common-mode rejection ratio | 80 | 110 | dB | 输入共模信号抑制比 | 5 | ||
| Short-circuit current limit | 15 | 20 | 25 | mA | 短路电流限制 | 5 | |
| Upper clamp voltage | 1 | VDD | 上限钳位电压 | 5 | |||
| Lower clamp voltage | 0 | VDD | 下限钳位电压 | 5 | |||
| Rated overload pressure | 2.5 | × range | 60kPa<量程≤200kPa (this part 0~200 kPa) | 5 | |||
| Burst (destruction) pressure | 3 | × range | 60kPa<量程≤200kPa (this part 0~200 kPa) | 5 | |||
| Compensation temperature range | 0 | 60 | ℃ | 补偿温度 (customizable) | 5 | ||
| Operating temperature | -20 | 100 | ℃ | 工作温度 | 5 | ||
| Storage temperature | -30 | 150 | ℃ | 贮存温度 | 5 | ||
| Overvoltage (may damage circuit chip) | 6.5 | V | 过载电压 6.5Vdc (可能烧毁电路芯片) | 6 |
CAD (KiCad official)
- Symbol:
GZP6847A201KPP50K - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
gzp6847a201kpp50k-etched.step/gzp6847a201kpp50k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gzp6847a201kpp50k.step/gzp6847a201kpp50k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256
6faba1d2ed07c8c4, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GZP6847A201KPP50K
**Sencoch Semiconductor** · Pressure Sensors · DIP-6
GZP6847A201KPP50K from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Pin 1 is labeled NC with function 'no definition' (无定义) in the electrical connection table, so it is not used. |
| 2 | VDD | power_in | Supply pin; the datasheet gives a 3.0 to 5.5 V supply range with a nominal (5 ± 0.25) V DC, only one of VDD pins 2 or 4 needs to be connected, and an overvoltage of 6.5 Vdc may destroy the circuit chip. |
| 3 | GND | power_in | Ground pin; only one of GND pins 3 or 6 needs to be connected, and the product has no reverse-polarity protection, so supply polarity must be observed. |
| 4 | VDD | power_in | Second supply pin, electrically the same as pin 2; only one of VDD pins 2 or 4 needs to be connected, and a 0.1 uF capacitor between VDD and GND is recommended by the datasheet. |
| 5 | OUT | output | Analog pressure output, standard 0.5 to 4.5 V (customizable) ratiometric to supply, with an output current load of 5 mA stated in the electrical characteristics. |
| 6 | GND | power_in | Second ground pin, electrically the same as pin 3; only one of GND pins 3 or 6 needs to be connected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy (linearity, repeatability, hysteresis, 0-70°C) | | -1 | | 1 | %Span | 0~70℃ output error; printed ±1 %Span | 5 |
| Zero point temperature drift | | -0.03 | | 0.03 | %FS/℃ | printed ±0.03 %FS/℃ | 5 |
| Full-scale temperature drift | | -0.03 | | 0.03 | %FS/℃ | printed ±0.03 %FS/℃ | 5 |
| Output signal range | | 0.5 | | 4.5 | V | 5V supply, 0.5~4.5 V output (customizable) | 5 |
| Supply voltage (electrical table row) | | | | 5.5 | V | 典型值参照出厂配置 | 5 |
| Supply voltage (product features) | | 3 | | 5.5 | V | 3.0~5.5V 供电 per product features | 4 |
| Performance reference supply | | -0.25 | 5 | 0.25 | V | performance spec supply (5±0.25) V DC; reference temperature 25℃ | 4 |
| Operating current | | | 1700 | | uA | @25℃ | 5 |
| Filter capacitor | | | 100 | | nF | | 5 |
| PSRR | | | 60 | | dB | | 5 |
| Output load current | | | 5 | | mA | | 5 |
| Input common-mode rejection ratio | | 80 | 110 | | dB | 输入共模信号抑制比 | 5 |
| Short-circuit current limit | | 15 | 20 | 25 | mA | 短路电流限制 | 5 |
| Upper clamp voltage | | | | 1 | VDD | 上限钳位电压 | 5 |
| Lower clamp voltage | | 0 | | | VDD | 下限钳位电压 | 5 |
| Rated overload pressure | | | | 2.5 | × range | 60kPa<量程≤200kPa (this part 0~200 kPa) | 5 |
| Burst (destruction) pressure | | | | 3 | × range | 60kPa<量程≤200kPa (this part 0~200 kPa) | 5 |
| Compensation temperature range | | 0 | | 60 | ℃ | 补偿温度 (customizable) | 5 |
| Operating temperature | | -20 | | 100 | ℃ | 工作温度 | 5 |
| Storage temperature | | -30 | | 150 | ℃ | 贮存温度 | 5 |
| Overvoltage (may damage circuit chip) | | | | 6.5 | V | 过载电压 6.5Vdc (可能烧毁电路芯片) | 6 |
## CAD (KiCad official)
- Symbol: `GZP6847A201KPP50K`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `gzp6847a201kpp50k-etched.step` / `gzp6847a201kpp50k-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gzp6847a201kpp50k.step` / `gzp6847a201kpp50k.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sencoch Semiconductor datasheet](docs/gzp6847a201kpp50k-datasheet.pdf) (13 pp, sha256 `6faba1d2ed07c8c4`, retrieved 2026-10-29, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gzp6847a201kpp50k-datasheet.pdf)