Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GZP6847A201KPP50K

Sencoch Semiconductor · Pressure Sensors · DIP-6

GZP6847A201KPP50K from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Pin 1 is labeled NC with function 'no definition' (无定义) in the electrical connection table, so it is not used.
2 VDD power_in Supply pin; the datasheet gives a 3.0 to 5.5 V supply range with a nominal (5 ± 0.25) V DC, only one of VDD pins 2 or 4 needs to be connected, and an overvoltage of 6.5 Vdc may destroy the circuit chip.
3 GND power_in Ground pin; only one of GND pins 3 or 6 needs to be connected, and the product has no reverse-polarity protection, so supply polarity must be observed.
4 VDD power_in Second supply pin, electrically the same as pin 2; only one of VDD pins 2 or 4 needs to be connected, and a 0.1 uF capacitor between VDD and GND is recommended by the datasheet.
5 OUT output Analog pressure output, standard 0.5 to 4.5 V (customizable) ratiometric to supply, with an output current load of 5 mA stated in the electrical characteristics.
6 GND power_in Second ground pin, electrically the same as pin 3; only one of GND pins 3 or 6 needs to be connected.

Key specifications

Parameter Value
Manufacturer Sencoch Semiconductor
Package DIP-6
Category Sensors
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Accuracy (linearity, repeatability, hysteresis, 0-70°C) -1 1 %Span 0~70℃ output error; printed ±1 %Span 5
Zero point temperature drift -0.03 0.03 %FS/℃ printed ±0.03 %FS/℃ 5
Full-scale temperature drift -0.03 0.03 %FS/℃ printed ±0.03 %FS/℃ 5
Output signal range 0.5 4.5 V 5V supply, 0.5~4.5 V output (customizable) 5
Supply voltage (electrical table row) 5.5 V 典型值参照出厂配置 5
Supply voltage (product features) 3 5.5 V 3.0~5.5V 供电 per product features 4
Performance reference supply -0.25 5 0.25 V performance spec supply (5±0.25) V DC; reference temperature 25℃ 4
Operating current 1700 uA @25℃ 5
Filter capacitor 100 nF 5
PSRR 60 dB 5
Output load current 5 mA 5
Input common-mode rejection ratio 80 110 dB 输入共模信号抑制比 5
Short-circuit current limit 15 20 25 mA 短路电流限制 5
Upper clamp voltage 1 VDD 上限钳位电压 5
Lower clamp voltage 0 VDD 下限钳位电压 5
Rated overload pressure 2.5 × range 60kPa<量程≤200kPa (this part 0~200 kPa) 5
Burst (destruction) pressure 3 × range 60kPa<量程≤200kPa (this part 0~200 kPa) 5
Compensation temperature range 0 60 ℃ 补偿温度 (customizable) 5
Operating temperature -20 100 ℃ 工作温度 5
Storage temperature -30 150 ℃ 贮存温度 5
Overvoltage (may damage circuit chip) 6.5 V 过载电压 6.5Vdc (可能烧毁电路芯片) 6

CAD (KiCad official)

  • Symbol: GZP6847A201KPP50K
  • Footprint: Package_DIP:DIP-6_W7.62mm
  • 3D model: DIP-6 (KiCad packages3D, STEP)
  • 3D model files: gzp6847a201kpp50k-etched.step / gzp6847a201kpp50k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gzp6847a201kpp50k.step / gzp6847a201kpp50k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256 6faba1d2ed07c8c4, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF