main
Ray
Publish 0.1.0
90dea7e
GZP6847A040KPP50K
Sencoch Semiconductor · Pressure Sensors · DIP-6
GZP6847A040KPP50K from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Pin 1 is listed as NC with the function 'undefined' (无定义) in the electrical connection table, so it has no specified function and is not defined by the datasheet. |
| 2 | VDD | power_in | Power supply input; the datasheet specifies a supply of (5±0.25) V DC with a typical value referenced to the factory configuration, and an overvoltage of 6.5 Vdc may destroy the circuit chip, so a 0.1 µF capacitor should be placed between VDD and GND. |
| 3 | GND | power_in | Ground connection; the datasheet notes that supply and ground connections need only one of the paired VDD/GND pins to be wired, and the device has no reverse-polarity protection so supply polarity must be observed. |
| 4 | VDD | power_in | Second power supply pin (duplicate of pin 2); the same supply limits apply, with an overvoltage of 6.5 Vdc able to destroy the circuit chip. |
| 5 | OUT | output | Analog ratiometric/standard voltage output; the datasheet gives the output as 0.5-4.5 V (customizable) and a output load current of 5 mA, with the output clamped between GND and VDD limits. |
| 6 | GND | power_in | Second ground pin (duplicate of pin 3); it is connected to the same ground as pin 3 and the same reverse-polarity caution applies. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电源 Supply voltage (nominal, tolerance) | -0.25 | 5 | 0.25 | V | (5±0.25)V DC supply | 4 | |
| 供电电压 Supply voltage range (product features) | 3 | 5.5 | V | 3.0~5.5V 供电 (product features) | 4 | ||
| 供电电压 Supply voltage (electrical table) | 5.5 | V | 典型值参照出厂配置 | 5 | |||
| 过载电压 Overload voltage (may burn circuit chip) | 6.5 | Vdc | 6 | ||||
| 输出信号 Output signal | 0.5 | 4.5 | V | 可定制 (customizable) | 5 | ||
| 精度 Accuracy (output error) | -1 | 1 | %Span | 0~70℃ output error (linearity, repeatability, hysteresis) | 5 | ||
| 零点温度漂移 Zero-point temperature drift | -0.03 | 0.03 | %FS/℃ | 5 | |||
| 满量程温度漂移 Full-scale temperature drift | -0.03 | 0.03 | %FS/℃ | 5 | |||
| 短路电流限制 Short-circuit current limit | 15 | 20 | 25 | mA | 5 | ||
| 输入共模信号抑制比 Common-mode rejection ratio | 80 | 110 | dB | 5 | |||
| 上限钳位电压 Upper clamp voltage | 1 | VDD | 5 | ||||
| 下限钳位电压 Lower clamp voltage | 0 | VDD | 5 | ||||
| 过载压力 Rated overload pressure | 4 | × | 量程≤60kPa | 5 | |||
| 破坏压力 Burst pressure | 5 | × | 量程≤60kPa | 5 | |||
| 补偿温度 Compensated temperature range | 0 | 60 | ℃ | 可定制 (customizable) | 5 | ||
| 工作温度 Operating temperature | -20 | 100 | ℃ | 5 | |||
| 贮存温度 Storage temperature | -30 | 150 | ℃ | 5 | |||
| 工作电流 Operating current | 1700 | uA | @25℃ | 5 | |||
| PSRR | PSRR | 60 | dB | 5 | |||
| 输出电流负载 Output load current | 5 | mA | 5 | ||||
| 滤波电容 Filter capacitor | 100 | nF | 5 |
CAD (KiCad official)
- Symbol:
GZP6847A040KPP50K - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
gzp6847a040kpp50k-etched.step/gzp6847a040kpp50k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gzp6847a040kpp50k.step/gzp6847a040kpp50k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sencoch Semiconductor datasheet (13 pp, sha256
6faba1d2ed07c8c4, retrieved 2026-10-31, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GZP6847A040KPP50K
**Sencoch Semiconductor** · Pressure Sensors · DIP-6
GZP6847A040KPP50K from Sencoch Semiconductor, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Pin 1 is listed as NC with the function 'undefined' (无定义) in the electrical connection table, so it has no specified function and is not defined by the datasheet. |
| 2 | VDD | power_in | Power supply input; the datasheet specifies a supply of (5±0.25) V DC with a typical value referenced to the factory configuration, and an overvoltage of 6.5 Vdc may destroy the circuit chip, so a 0.1 µF capacitor should be placed between VDD and GND. |
| 3 | GND | power_in | Ground connection; the datasheet notes that supply and ground connections need only one of the paired VDD/GND pins to be wired, and the device has no reverse-polarity protection so supply polarity must be observed. |
| 4 | VDD | power_in | Second power supply pin (duplicate of pin 2); the same supply limits apply, with an overvoltage of 6.5 Vdc able to destroy the circuit chip. |
| 5 | OUT | output | Analog ratiometric/standard voltage output; the datasheet gives the output as 0.5-4.5 V (customizable) and a output load current of 5 mA, with the output clamped between GND and VDD limits. |
| 6 | GND | power_in | Second ground pin (duplicate of pin 3); it is connected to the same ground as pin 3 and the same reverse-polarity caution applies. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sencoch Semiconductor |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电源 Supply voltage (nominal, tolerance) | | -0.25 | 5 | 0.25 | V | (5±0.25)V DC supply | 4 |
| 供电电压 Supply voltage range (product features) | | 3 | | 5.5 | V | 3.0~5.5V 供电 (product features) | 4 |
| 供电电压 Supply voltage (electrical table) | | | | 5.5 | V | 典型值参照出厂配置 | 5 |
| 过载电压 Overload voltage (may burn circuit chip) | | | | 6.5 | Vdc | | 6 |
| 输出信号 Output signal | | 0.5 | | 4.5 | V | 可定制 (customizable) | 5 |
| 精度 Accuracy (output error) | | -1 | | 1 | %Span | 0~70℃ output error (linearity, repeatability, hysteresis) | 5 |
| 零点温度漂移 Zero-point temperature drift | | -0.03 | | 0.03 | %FS/℃ | | 5 |
| 满量程温度漂移 Full-scale temperature drift | | -0.03 | | 0.03 | %FS/℃ | | 5 |
| 短路电流限制 Short-circuit current limit | | 15 | 20 | 25 | mA | | 5 |
| 输入共模信号抑制比 Common-mode rejection ratio | | 80 | 110 | | dB | | 5 |
| 上限钳位电压 Upper clamp voltage | | | | 1 | VDD | | 5 |
| 下限钳位电压 Lower clamp voltage | | 0 | | | VDD | | 5 |
| 过载压力 Rated overload pressure | | | | 4 | × | 量程≤60kPa | 5 |
| 破坏压力 Burst pressure | | | | 5 | × | 量程≤60kPa | 5 |
| 补偿温度 Compensated temperature range | | 0 | | 60 | ℃ | 可定制 (customizable) | 5 |
| 工作温度 Operating temperature | | -20 | | 100 | ℃ | | 5 |
| 贮存温度 Storage temperature | | -30 | | 150 | ℃ | | 5 |
| 工作电流 Operating current | | | 1700 | | uA | @25℃ | 5 |
| PSRR | PSRR | | 60 | | dB | | 5 |
| 输出电流负载 Output load current | | | 5 | | mA | | 5 |
| 滤波电容 Filter capacitor | | | 100 | | nF | | 5 |
## CAD (KiCad official)
- Symbol: `GZP6847A040KPP50K`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `gzp6847a040kpp50k-etched.step` / `gzp6847a040kpp50k-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gzp6847a040kpp50k.step` / `gzp6847a040kpp50k.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sencoch Semiconductor datasheet](docs/gzp6847a040kpp50k-datasheet.pdf) (13 pp, sha256 `6faba1d2ed07c8c4`, retrieved 2026-10-31, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gzp6847a040kpp50k-datasheet.pdf)