main
History Download
Ray Publish 0.1.0 b91625b

GS75232TSS

Silicore(芯谷) · RS232 ICs · TSSOP-20

GS75232TSS from Silicore(芯谷), in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply voltage, recommended 7.5 V to 15 V (9 V typical); power up VSS, then VDD, then VCC.
2 RA1 input Receiver A1 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings.
3 RA2 input Receiver A2 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings.
4 RA3 input Receiver A3 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings.
5 DY1 output Driver Y1 output; driver output voltage range is −15 V to +15 V per the absolute maximum ratings.
6 DY2 output Driver Y2 output; driver output voltage range is −15 V to +15 V per the absolute maximum ratings.
7 RA4 input Receiver A4 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings.
8 DY3 output Driver Y3 output; driver output voltage range is −15 V to +15 V per the absolute maximum ratings.
9 RA5 input Receiver A5 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings.
10 VSS power_in Negative supply voltage, recommended −7.5 V to −15 V (−9 V typical); power up first in the sequence VSS, VDD, VCC.
11 GND power_in Ground; all device voltages are referenced to the network ground terminal.
12 RY5 output Receiver Y5 output; recommended receiver low-level output current is up to 16 mA.
13 DA3 input Driver A3 input; driver input voltage range is −15 V to +7 V per the absolute maximum ratings.
14 RY4 output Receiver Y4 output; recommended receiver low-level output current is up to 16 mA.
15 DA2 input Driver A2 input; driver input voltage range is −15 V to +7 V per the absolute maximum ratings.
16 DA1 input Driver A1 input; driver input voltage range is −15 V to +7 V per the absolute maximum ratings.
17 RY3 output Receiver Y3 output; recommended receiver low-level output current is up to 16 mA.
18 RY2 output Receiver Y2 output; recommended receiver low-level output current is up to 16 mA.
19 RY1 output Receiver Y1 output; recommended receiver low-level output current is up to 16 mA.
20 VCC power_in Logic supply voltage, recommended 4.5 V to 5.5 V (5 V typical); power up after VDD.

Key specifications

Parameter Value
Manufacturer Silicore(芯谷)
Package TSSOP-20
Category Interface
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (absolute maximum) VDD 15 V Voltages with respect to network ground 5
Supply voltage VSS (absolute maximum) VSS -15 V Voltages with respect to network ground 5
Supply voltage VCC (absolute maximum) VCC 10 V Voltages with respect to network ground 5
Input voltage range, driver -15 7 V 5
Input voltage range, receiver -30 30 V 5
Driver output voltage range Vo -15 15 V 5
Receiver low-level output current IOL 20 mA 5
Operating virtual junction temperature TJ 150 ℃ 5
Storage temperature range Tstg -65 150 ℃ 5
Supply voltage VDD (recommended) VDD 7.5 9 15 V 5
Supply voltage VSS (recommended) VSS -7.5 -9 -15 V 5
Supply voltage VCC (recommended) VCC 4.5 5 5.5 V 5
High-level input voltage (driver only) VIH 1.9 V 5
Low-level input voltage (driver only) VIH 0.8 V 5
High-level output current, driver IOH -6 mA Driver 5
High-level output current, receiver IOH -0.5 mA Receiver 5
Low-level output current, driver IOL 6 mA Driver 5
Low-level output current, receiver IOL 16 mA Receiver 5
Operating free-air temperature TA 0 70 ℃ 5
Supply current from VDD IDD 15 mA All inputs at 1.9V, no load; VDD=9V, VSS=-9V 6
Supply current from VDD IDD 19 mA All inputs at 1.9V, no load; VDD=12V, VSS=-12V 6
Supply current from VDD IDD 25 mA All inputs at 1.9V, no load; VDD=15V, VSS=-15V 6
Supply current from VDD IDD 4.5 mA All inputs at 0.8V, no load; VDD=9V, VSS=-9V 6
Supply current from VDD IDD 5.5 mA All inputs at 0.8V, no load; VDD=12V, VSS=-12V 6
Supply current from VDD IDD 9 mA All inputs at 0.8V, no load; VDD=15V, VSS=-15V 6
Supply current from VSS ISS -15 mA All inputs at 1.9V, no load; VDD=9V, VSS=-9V 6
Supply current from VSS ISS -19 mA All inputs at 1.9V, no load; VDD=12V, VSS=-12V 6
Supply current from VSS ISS -25 mA All inputs at 1.9V, no load; VDD=15V, VSS=-15V 6
Supply current from VCC ICC 30 mA All inputs at 5V, no load, Vcc=5V 6
High-level output voltage, driver VOH 6 7.5 V VIL=0.8V, RL=3k (See Figure 1) 6
Low-level output voltage, driver VOL -7.5 -6 V VIH=1.9V, RL=3k (See Figure 1) 6
High-level input current, driver IIH 10 μA VI=5V (See Figure 2) 6
Low-level input current, driver IIL -1.6 mA VI=0V (See Figure 2) 6
High-level short-circuit output current, driver IOS(H) -19.5 -12 -4.5 mA VIL=0.8V, VO=0 (See Figure 1) 6
Low-level short-circuit output current, driver IOS(L) 4.5 12 19.5 mA VIH=2V, VO=0 (See Figure 1) 6
Output resistance Ro 300 Ω VCC=VDD=VSS=0, VO=−2V to 2V 6
Propagation delay time, low to high-level output, driver tPLH 315 500 ns RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) 7
Propagation delay time, high to low-level output, driver tPHL 75 175 ns RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) 7
Transition time, low to high-level output, driver tTLH 60 100 ns RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) 7
Transition time, low to high-level output, driver tTLH 1.7 2.5 μs CL=2500pF (See Figure 3) (Note 8) 7
Transition time, high to low-level output, driver tTHL 40 75 ns RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) 7
Transition time, high to low-level output, driver tTHL 1.5 2.5 μs CL=2500pF (See Figure 3) (Note 8) 7
Positive-going input threshold voltage VIT+ 1.75 1.9 2.3 V TA=25℃ (See Figure 5) 7
Positive-going input threshold voltage VIT+ 1.55 2.3 V TA=0℃ to 70℃ (See Figure 5) 7
Negative-going input threshold voltage VIT- 0.75 0.97 1.25 V 7
Input hysteresis voltage Vhys 0.5 V (VIT+ − VIT-) 7
High-level output voltage, receiver VOH 2.6 4 5 V IOH=−0.5mA, VIH=0.75V 7
High-level output voltage, receiver, inputs open VOH 2.6 V Inputs open 7
Low-level output voltage, receiver VOL 0.2 0.45 V IOL=10mA, VI=3V 7
High-level input current, receiver IIH 3.6 8.3 mA VI=25V (See Figure 5) 7
High-level input current, receiver IIH 0.43 mA VI=3V (See Figure 5) 7
Low-level input current, receiver IIL -8.3 -3.6 mA VI=−25V (See Figure 5) 7
Low-level input current, receiver IIL -0.43 mA VI=−3V (See Figure 5) 7
Short-circuit output current, receiver IOS -12 -3.4 mA (See Figure 4) 7
Propagation delay time, low to high-level output, receiver tPLH 107 250 ns CL=50pF, RL=5k (See Figure 6) 8
Propagation delay time, high to low-level output, receiver tPHL 42 150 ns 8
Transition time, low to high-level output, receiver tTLH 175 350 ns 8
Transition time, high to low-level output, receiver tTHL 16 60 ns 8
Propagation delay time, low to high-level output, receiver tPLH 100 160 ns CL=15pF, RL=1.5k (See Figure 6) 8
Package thermal impedance, TSSOP20 83 Note 2 and 3 (JESD 51-7) 5

CAD (KiCad official)

  • Symbol: GS75232TSS
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: gs75232tss-etched.step / gs75232tss-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gs75232tss.step / gs75232tss.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Silicore(芯谷) datasheet (15 pp, sha256 8c8ceba03810643e, retrieved 2026-11-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF