Generated by kicad-footprint-generator · KiCad file format 20260206
GS75232TSS
Silicore(芯谷) · RS232 ICs · TSSOP-20
GS75232TSS from Silicore(芯谷), in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply voltage, recommended 7.5 V to 15 V (9 V typical); power up VSS, then VDD, then VCC. |
| 2 | RA1 | input | Receiver A1 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings. |
| 3 | RA2 | input | Receiver A2 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings. |
| 4 | RA3 | input | Receiver A3 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings. |
| 5 | DY1 | output | Driver Y1 output; driver output voltage range is −15 V to +15 V per the absolute maximum ratings. |
| 6 | DY2 | output | Driver Y2 output; driver output voltage range is −15 V to +15 V per the absolute maximum ratings. |
| 7 | RA4 | input | Receiver A4 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings. |
| 8 | DY3 | output | Driver Y3 output; driver output voltage range is −15 V to +15 V per the absolute maximum ratings. |
| 9 | RA5 | input | Receiver A5 input; receiver input voltage range is −30 V to +30 V per the absolute maximum ratings. |
| 10 | VSS | power_in | Negative supply voltage, recommended −7.5 V to −15 V (−9 V typical); power up first in the sequence VSS, VDD, VCC. |
| 11 | GND | power_in | Ground; all device voltages are referenced to the network ground terminal. |
| 12 | RY5 | output | Receiver Y5 output; recommended receiver low-level output current is up to 16 mA. |
| 13 | DA3 | input | Driver A3 input; driver input voltage range is −15 V to +7 V per the absolute maximum ratings. |
| 14 | RY4 | output | Receiver Y4 output; recommended receiver low-level output current is up to 16 mA. |
| 15 | DA2 | input | Driver A2 input; driver input voltage range is −15 V to +7 V per the absolute maximum ratings. |
| 16 | DA1 | input | Driver A1 input; driver input voltage range is −15 V to +7 V per the absolute maximum ratings. |
| 17 | RY3 | output | Receiver Y3 output; recommended receiver low-level output current is up to 16 mA. |
| 18 | RY2 | output | Receiver Y2 output; recommended receiver low-level output current is up to 16 mA. |
| 19 | RY1 | output | Receiver Y1 output; recommended receiver low-level output current is up to 16 mA. |
| 20 | VCC | power_in | Logic supply voltage, recommended 4.5 V to 5.5 V (5 V typical); power up after VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicore(芯谷) |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (absolute maximum) | VDD | 15 | V | Voltages with respect to network ground | 5 | ||
| Supply voltage VSS (absolute maximum) | VSS | -15 | V | Voltages with respect to network ground | 5 | ||
| Supply voltage VCC (absolute maximum) | VCC | 10 | V | Voltages with respect to network ground | 5 | ||
| Input voltage range, driver | -15 | 7 | V | 5 | |||
| Input voltage range, receiver | -30 | 30 | V | 5 | |||
| Driver output voltage range | Vo | -15 | 15 | V | 5 | ||
| Receiver low-level output current | IOL | 20 | mA | 5 | |||
| Operating virtual junction temperature | TJ | 150 | ℃ | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 5 | ||
| Supply voltage VDD (recommended) | VDD | 7.5 | 9 | 15 | V | 5 | |
| Supply voltage VSS (recommended) | VSS | -7.5 | -9 | -15 | V | 5 | |
| Supply voltage VCC (recommended) | VCC | 4.5 | 5 | 5.5 | V | 5 | |
| High-level input voltage (driver only) | VIH | 1.9 | V | 5 | |||
| Low-level input voltage (driver only) | VIH | 0.8 | V | 5 | |||
| High-level output current, driver | IOH | -6 | mA | Driver | 5 | ||
| High-level output current, receiver | IOH | -0.5 | mA | Receiver | 5 | ||
| Low-level output current, driver | IOL | 6 | mA | Driver | 5 | ||
| Low-level output current, receiver | IOL | 16 | mA | Receiver | 5 | ||
| Operating free-air temperature | TA | 0 | 70 | ℃ | 5 | ||
| Supply current from VDD | IDD | 15 | mA | All inputs at 1.9V, no load; VDD=9V, VSS=-9V | 6 | ||
| Supply current from VDD | IDD | 19 | mA | All inputs at 1.9V, no load; VDD=12V, VSS=-12V | 6 | ||
| Supply current from VDD | IDD | 25 | mA | All inputs at 1.9V, no load; VDD=15V, VSS=-15V | 6 | ||
| Supply current from VDD | IDD | 4.5 | mA | All inputs at 0.8V, no load; VDD=9V, VSS=-9V | 6 | ||
| Supply current from VDD | IDD | 5.5 | mA | All inputs at 0.8V, no load; VDD=12V, VSS=-12V | 6 | ||
| Supply current from VDD | IDD | 9 | mA | All inputs at 0.8V, no load; VDD=15V, VSS=-15V | 6 | ||
| Supply current from VSS | ISS | -15 | mA | All inputs at 1.9V, no load; VDD=9V, VSS=-9V | 6 | ||
| Supply current from VSS | ISS | -19 | mA | All inputs at 1.9V, no load; VDD=12V, VSS=-12V | 6 | ||
| Supply current from VSS | ISS | -25 | mA | All inputs at 1.9V, no load; VDD=15V, VSS=-15V | 6 | ||
| Supply current from VCC | ICC | 30 | mA | All inputs at 5V, no load, Vcc=5V | 6 | ||
| High-level output voltage, driver | VOH | 6 | 7.5 | V | VIL=0.8V, RL=3k (See Figure 1) | 6 | |
| Low-level output voltage, driver | VOL | -7.5 | -6 | V | VIH=1.9V, RL=3k (See Figure 1) | 6 | |
| High-level input current, driver | IIH | 10 | μA | VI=5V (See Figure 2) | 6 | ||
| Low-level input current, driver | IIL | -1.6 | mA | VI=0V (See Figure 2) | 6 | ||
| High-level short-circuit output current, driver | IOS(H) | -19.5 | -12 | -4.5 | mA | VIL=0.8V, VO=0 (See Figure 1) | 6 |
| Low-level short-circuit output current, driver | IOS(L) | 4.5 | 12 | 19.5 | mA | VIH=2V, VO=0 (See Figure 1) | 6 |
| Output resistance | Ro | 300 | Ω | VCC=VDD=VSS=0, VO=−2V to 2V | 6 | ||
| Propagation delay time, low to high-level output, driver | tPLH | 315 | 500 | ns | RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) | 7 | |
| Propagation delay time, high to low-level output, driver | tPHL | 75 | 175 | ns | RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) | 7 | |
| Transition time, low to high-level output, driver | tTLH | 60 | 100 | ns | RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) | 7 | |
| Transition time, low to high-level output, driver | tTLH | 1.7 | 2.5 | μs | CL=2500pF (See Figure 3) (Note 8) | 7 | |
| Transition time, high to low-level output, driver | tTHL | 40 | 75 | ns | RL=3KΩ to 7KΩ, CL=15pF (See Figure 3) | 7 | |
| Transition time, high to low-level output, driver | tTHL | 1.5 | 2.5 | μs | CL=2500pF (See Figure 3) (Note 8) | 7 | |
| Positive-going input threshold voltage | VIT+ | 1.75 | 1.9 | 2.3 | V | TA=25℃ (See Figure 5) | 7 |
| Positive-going input threshold voltage | VIT+ | 1.55 | 2.3 | V | TA=0℃ to 70℃ (See Figure 5) | 7 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 0.97 | 1.25 | V | 7 | |
| Input hysteresis voltage | Vhys | 0.5 | V | (VIT+ − VIT-) | 7 | ||
| High-level output voltage, receiver | VOH | 2.6 | 4 | 5 | V | IOH=−0.5mA, VIH=0.75V | 7 |
| High-level output voltage, receiver, inputs open | VOH | 2.6 | V | Inputs open | 7 | ||
| Low-level output voltage, receiver | VOL | 0.2 | 0.45 | V | IOL=10mA, VI=3V | 7 | |
| High-level input current, receiver | IIH | 3.6 | 8.3 | mA | VI=25V (See Figure 5) | 7 | |
| High-level input current, receiver | IIH | 0.43 | mA | VI=3V (See Figure 5) | 7 | ||
| Low-level input current, receiver | IIL | -8.3 | -3.6 | mA | VI=−25V (See Figure 5) | 7 | |
| Low-level input current, receiver | IIL | -0.43 | mA | VI=−3V (See Figure 5) | 7 | ||
| Short-circuit output current, receiver | IOS | -12 | -3.4 | mA | (See Figure 4) | 7 | |
| Propagation delay time, low to high-level output, receiver | tPLH | 107 | 250 | ns | CL=50pF, RL=5k (See Figure 6) | 8 | |
| Propagation delay time, high to low-level output, receiver | tPHL | 42 | 150 | ns | 8 | ||
| Transition time, low to high-level output, receiver | tTLH | 175 | 350 | ns | 8 | ||
| Transition time, high to low-level output, receiver | tTHL | 16 | 60 | ns | 8 | ||
| Propagation delay time, low to high-level output, receiver | tPLH | 100 | 160 | ns | CL=15pF, RL=1.5k (See Figure 6) | 8 | |
| Package thermal impedance, TSSOP20 | 83 | Note 2 and 3 (JESD 51-7) | 5 |
CAD (KiCad official)
- Symbol:
GS75232TSS - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
gs75232tss-etched.step/gs75232tss-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gs75232tss.step/gs75232tss.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicore(芯谷) datasheet (15 pp, sha256
8c8ceba03810643e, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).