main
Ray Publish 0.1.0 8908e93

GP9303-F500-N-SW

Guestgood · ADCs/DACs - Special Purpose · SOP-8

GP9303-F500-N-SW from Guestgood, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected internally (floating).
2 NC unconnected Not connected internally (floating).
3 VIN power_in Analog voltage input, 0 V to 5 V (absolute max -0.3 V to VCC + 0.3 V), converted to 0%-100% PWM duty (DPWM = VIN/5V).
4 VCC power_in Power supply, 8 V to 40 V (12 V typical).
5 GND power_in Ground.
6 PWM output PWM duty-cycle signal output, 1 Hz to 1 MHz (default 1 kHz), 0%-100% duty.
7 PWMB output Complementary (inverted) signal of the PWM output.
8 V5V power_out Internal LDO 5 V output; requires an external 22 uF capacitor.

Key specifications

Parameter Value
Manufacturer Guestgood
Package SOP-8
Category Data Acquisition
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (电源电压) VCC 8 12 40 V 5
Supply current (电源功耗) ICC 5 mA VCC @ 15.0V 5
Input voltage (输入电压) VIN 0 5 V * 5
Input leakage current (输入漏电流) IIL 3 μA VIN = VCC or VSS 5
Output leakage current (输出漏电流) ILO 3 μA VIN = VCC or VSS 5
Output low voltage (输出低电平) VOL 0.4 V VCC @ 15.0V, IOL = 10 mA 5
Output high voltage (输出高电平) VOH -0.4 V VCC @ 15.0V, IOL = 10 mA; printed as VCC-0.4 V, so min is relative to VCC 5
Output rise time (输出上升时间) Tr 20 40 ns VCC @ 15.0V, CLOAD=5pF 5
Output fall time (输出下降时间) Tf 20 40 ns VCC @ 15.0V, CLOAD=5pF 5
PWM signal frequency (PWM信号频率) fpwm 1 Hz Note 1: adjustable 1Hz to 1MHz; default printed as 1K, max printed as 1M (prefixes not converted) 5
PWM frequency error (PWM信号的频率误差) ∆fpwm -3 0 3 % 5
PWM duty cycle error (PWM信号占空比误差) ∆Dpwm 1 % 5
PWM duty cycle (PWM信号的占空比) Dpwm 0 100 % 注2 (average duty cycle) 5
PWM jitter (PWM信号的抖动) Jpwm 0.2 %p-p FBW 响应带宽 1K Hz; jitter measured at 1KHz (note 3) 5
Operating temperature (工业操作温度) -40 125 °C 2
Storage temperature (储存温度) -50 125 °C 2
Input voltage (输入电压, absolute) -0.3 V upper limit printed as VCC + 0.3 V; not numeric 2
Maximum voltage (最大电压) 40 V 2
ESD protection (ESD 保护) 2000 V printed as > 2000 V; ESD model not stated 2
Operating temperature, SW ordering variant -40 85 °C SOP8 SW suffix per ordering table 11

CAD (KiCad official)

  • Symbol: GP9303-F500-N-SW
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: gp9303-f500-n-sw-etched.step / gp9303-f500-n-sw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gp9303-f500-n-sw.step / gp9303-f500-n-sw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Guestgood datasheet (12 pp, sha256 62121f65c401f0e0, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF