Generated by kicad-footprint-generator · KiCad file format 20260206
GP9303-F500-N-SW
Guestgood · ADCs/DACs - Special Purpose · SOP-8
GP9303-F500-N-SW from Guestgood, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected internally (floating). |
| 2 | NC | unconnected | Not connected internally (floating). |
| 3 | VIN | power_in | Analog voltage input, 0 V to 5 V (absolute max -0.3 V to VCC + 0.3 V), converted to 0%-100% PWM duty (DPWM = VIN/5V). |
| 4 | VCC | power_in | Power supply, 8 V to 40 V (12 V typical). |
| 5 | GND | power_in | Ground. |
| 6 | PWM | output | PWM duty-cycle signal output, 1 Hz to 1 MHz (default 1 kHz), 0%-100% duty. |
| 7 | PWMB | output | Complementary (inverted) signal of the PWM output. |
| 8 | V5V | power_out | Internal LDO 5 V output; requires an external 22 uF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Guestgood |
| Package | SOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (电源电压) | VCC | 8 | 12 | 40 | V | 5 | |
| Supply current (电源功耗) | ICC | 5 | mA | VCC @ 15.0V | 5 | ||
| Input voltage (输入电压) | VIN | 0 | 5 | V | * | 5 | |
| Input leakage current (输入漏电流) | IIL | 3 | μA | VIN = VCC or VSS | 5 | ||
| Output leakage current (输出漏电流) | ILO | 3 | μA | VIN = VCC or VSS | 5 | ||
| Output low voltage (输出低电平) | VOL | 0.4 | V | VCC @ 15.0V, IOL = 10 mA | 5 | ||
| Output high voltage (输出高电平) | VOH | -0.4 | V | VCC @ 15.0V, IOL = 10 mA; printed as VCC-0.4 V, so min is relative to VCC | 5 | ||
| Output rise time (输出上升时间) | Tr | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 5 | |
| Output fall time (输出下降时间) | Tf | 20 | 40 | ns | VCC @ 15.0V, CLOAD=5pF | 5 | |
| PWM signal frequency (PWM信号频率) | fpwm | 1 | Hz | Note 1: adjustable 1Hz to 1MHz; default printed as 1K, max printed as 1M (prefixes not converted) | 5 | ||
| PWM frequency error (PWM信号的频率误差) | ∆fpwm | -3 | 0 | 3 | % | 5 | |
| PWM duty cycle error (PWM信号占空比误差) | ∆Dpwm | 1 | % | 5 | |||
| PWM duty cycle (PWM信号的占空比) | Dpwm | 0 | 100 | % | 注2 (average duty cycle) | 5 | |
| PWM jitter (PWM信号的抖动) | Jpwm | 0.2 | %p-p | FBW 响应带宽 1K Hz; jitter measured at 1KHz (note 3) | 5 | ||
| Operating temperature (工业操作温度) | -40 | 125 | °C | 2 | |||
| Storage temperature (储存温度) | -50 | 125 | °C | 2 | |||
| Input voltage (输入电压, absolute) | -0.3 | V | upper limit printed as VCC + 0.3 V; not numeric | 2 | |||
| Maximum voltage (最大电压) | 40 | V | 2 | ||||
| ESD protection (ESD 保护) | 2000 | V | printed as > 2000 V; ESD model not stated | 2 | |||
| Operating temperature, SW ordering variant | -40 | 85 | °C | SOP8 SW suffix per ordering table | 11 |
CAD (KiCad official)
- Symbol:
GP9303-F500-N-SW - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp9303-f500-n-sw-etched.step/gp9303-f500-n-sw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp9303-f500-n-sw.step/gp9303-f500-n-sw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Guestgood datasheet (12 pp, sha256
62121f65c401f0e0, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).