main
History Download
Ray Initial commit: component/gn1622a 8abf397

GN1622A

GN Semic · LCD Drivers · LQFP-44(10x10)

GN1622A from GN Semic, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select Input (with internal pull-up resistor); when CS is high, data read/write is disabled and serial interface circuit is reset; when CS is low, data and commands are transferred.
2 RD input Read Clock (with internal pull-up resistor); data in RAM is output on the falling edge of RD clock.
3 WR input Write Clock (with internal pull-up resistor); data is stored on the rising edge of WR clock.
4 DATA bidirectional Serial Data (with internal pull-up resistor) for bidirectional data and command transfer.
5 VSS power_in Negative power supply; ground reference.
6 OSCI input External oscillator clock input.
7 VDD power_in Positive power supply voltage; operating range 2.7V to 5.2V.
8 VLCD input LCD working voltage input; must be lower than VDD.
9 IRQ output Interrupt request overflow output; open-drain output that outputs 2 kHz/4 kHz timebase or WDT overflow signal.
10 T1 unconnected Not connected; internal timing signal not available on this package variant.
11 T2 unconnected Not connected; internal timing signal not available on this package variant.
12 T3 unconnected Not connected; internal timing signal not available on this package variant.
13 COM0 output LCD COM output line 0; drives LCD common electrode 0 for 1/8 duty cycle, 1/4 bias display.
14 COM1 output LCD COM output line 1; drives LCD common electrode 1 for 1/8 duty cycle, 1/4 bias display.
15 COM2 output LCD COM output line 2; drives LCD common electrode 2 for 1/8 duty cycle, 1/4 bias display.
16 COM3 output LCD COM output line 3; drives LCD common electrode 3 for 1/8 duty cycle, 1/4 bias display.
17 COM4 output LCD COM output line 4; drives LCD common electrode 4 for 1/8 duty cycle, 1/4 bias display.
18 COM5 output LCD COM output line 5; drives LCD common electrode 5 for 1/8 duty cycle, 1/4 bias display.
19 COM6 output LCD COM output line 6; drives LCD common electrode 6 for 1/8 duty cycle, 1/4 bias display.
20 COM7 output LCD COM output line 7; drives LCD common electrode 7 for 1/8 duty cycle, 1/4 bias display.
21 SEG0 output LCD segment output line 0; drives LCD segment electrode 0 for 32x8 dot matrix display.
22 SEG1 output LCD segment output line 1; drives LCD segment electrode 1 for 32x8 dot matrix display.
23 SEG2 output LCD segment output line 2; drives LCD segment electrode 2 for 32x8 dot matrix display.
24 SEG3 output LCD segment output line 3; drives LCD segment electrode 3 for 32x8 dot matrix display.
25 SEG4 output LCD segment output line 4; drives LCD segment electrode 4 for 32x8 dot matrix display.
26 SEG5 output LCD segment output line 5; drives LCD segment electrode 5 for 32x8 dot matrix display.
27 SEG6 output LCD segment output line 6; drives LCD segment electrode 6 for 32x8 dot matrix display.
28 SEG7 output LCD segment output line 7; drives LCD segment electrode 7 for 32x8 dot matrix display.
29 SEG8 output LCD segment output line 8; drives LCD segment electrode 8 for 32x8 dot matrix display.
30 SEG9 output LCD segment output line 9; drives LCD segment electrode 9 for 32x8 dot matrix display.
31 SEG10 output LCD segment output line 10; drives LCD segment electrode 10 for 32x8 dot matrix display.
32 SEG11 output LCD segment output line 11; drives LCD segment electrode 11 for 32x8 dot matrix display.
33 SEG12 output LCD segment output line 12; drives LCD segment electrode 12 for 32x8 dot matrix display.
34 SEG13 output LCD segment output line 13; drives LCD segment electrode 13 for 32x8 dot matrix display.
35 SEG14 output LCD segment output line 14; drives LCD segment electrode 14 for 32x8 dot matrix display.
36 SEG15 output LCD segment output line 15; drives LCD segment electrode 15 for 32x8 dot matrix display.
37 SEG16 output LCD segment output line 16; drives LCD segment electrode 16 for 32x8 dot matrix display.
38 SEG17 output LCD segment output line 17; drives LCD segment electrode 17 for 32x8 dot matrix display.
39 SEG18 output LCD segment output line 18; drives LCD segment electrode 18 for 32x8 dot matrix display.
40 SEG19 output LCD segment output line 19; drives LCD segment electrode 19 for 32x8 dot matrix display.
41 SEG20 output LCD segment output line 20; drives LCD segment electrode 20 for 32x8 dot matrix display.
42 SEG21 output LCD segment output line 21; drives LCD segment electrode 21 for 32x8 dot matrix display.
43 SEG22 output LCD segment output line 22; drives LCD segment electrode 22 for 32x8 dot matrix display.
44 SEG23 output LCD segment output line 23; drives LCD segment electrode 23 for 32x8 dot matrix display.

Key specifications

Parameter Value
Manufacturer GN Semic
Package LQFP-44(10x10)
Category LED Drivers
Pins 44

CAD (KiCad official)

  • Symbol: GN1622A
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: gn1622a-etched.step / gn1622a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gn1622a.step / gn1622a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GN Semic datasheet (17 pp, sha256 ab2cc4d9dd991861, retrieved 2026-09-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF