← Commit history
README.mdadded+81@@ -0,0 +1,81 @@+# GN1622A++**GN Semic** · LCD Drivers · LQFP-44(10x10)++GN1622A from GN Semic, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS | input | Chip Select Input (with internal pull-up resistor); when CS is high, data read/write is disabled and serial interface circuit is reset; when CS is low, data and commands are transferred. |+| 2 | RD | input | Read Clock (with internal pull-up resistor); data in RAM is output on the falling edge of RD clock. |+| 3 | WR | input | Write Clock (with internal pull-up resistor); data is stored on the rising edge of WR clock. |+| 4 | DATA | bidirectional | Serial Data (with internal pull-up resistor) for bidirectional data and command transfer. |+| 5 | VSS | power_in | Negative power supply; ground reference. |+| 6 | OSCI | input | External oscillator clock input. |+| 7 | VDD | power_in | Positive power supply voltage; operating range 2.7V to 5.2V. |+| 8 | VLCD | input | LCD working voltage input; must be lower than VDD. |+| 9 | IRQ | output | Interrupt request overflow output; open-drain output that outputs 2 kHz/4 kHz timebase or WDT overflow signal. |+| 10 | T1 | unconnected | Not connected; internal timing signal not available on this package variant. |+| 11 | T2 | unconnected | Not connected; internal timing signal not available on this package variant. |+| 12 | T3 | unconnected | Not connected; internal timing signal not available on this package variant. |+| 13 | COM0 | output | LCD COM output line 0; drives LCD common electrode 0 for 1/8 duty cycle, 1/4 bias display. |+| 14 | COM1 | output | LCD COM output line 1; drives LCD common electrode 1 for 1/8 duty cycle, 1/4 bias display. |+| 15 | COM2 | output | LCD COM output line 2; drives LCD common electrode 2 for 1/8 duty cycle, 1/4 bias display. |+| 16 | COM3 | output | LCD COM output line 3; drives LCD common electrode 3 for 1/8 duty cycle, 1/4 bias display. |+| 17 | COM4 | output | LCD COM output line 4; drives LCD common electrode 4 for 1/8 duty cycle, 1/4 bias display. |+| 18 | COM5 | output | LCD COM output line 5; drives LCD common electrode 5 for 1/8 duty cycle, 1/4 bias display. |+| 19 | COM6 | output | LCD COM output line 6; drives LCD common electrode 6 for 1/8 duty cycle, 1/4 bias display. |+| 20 | COM7 | output | LCD COM output line 7; drives LCD common electrode 7 for 1/8 duty cycle, 1/4 bias display. |+| 21 | SEG0 | output | LCD segment output line 0; drives LCD segment electrode 0 for 32x8 dot matrix display. |+| 22 | SEG1 | output | LCD segment output line 1; drives LCD segment electrode 1 for 32x8 dot matrix display. |+| 23 | SEG2 | output | LCD segment output line 2; drives LCD segment electrode 2 for 32x8 dot matrix display. |+| 24 | SEG3 | output | LCD segment output line 3; drives LCD segment electrode 3 for 32x8 dot matrix display. |+| 25 | SEG4 | output | LCD segment output line 4; drives LCD segment electrode 4 for 32x8 dot matrix display. |+| 26 | SEG5 | output | LCD segment output line 5; drives LCD segment electrode 5 for 32x8 dot matrix display. |+| 27 | SEG6 | output | LCD segment output line 6; drives LCD segment electrode 6 for 32x8 dot matrix display. |+| 28 | SEG7 | output | LCD segment output line 7; drives LCD segment electrode 7 for 32x8 dot matrix display. |+| 29 | SEG8 | output | LCD segment output line 8; drives LCD segment electrode 8 for 32x8 dot matrix display. |+| 30 | SEG9 | output | LCD segment output line 9; drives LCD segment electrode 9 for 32x8 dot matrix display. |+| 31 | SEG10 | output | LCD segment output line 10; drives LCD segment electrode 10 for 32x8 dot matrix display. |+| 32 | SEG11 | output | LCD segment output line 11; drives LCD segment electrode 11 for 32x8 dot matrix display. |+| 33 | SEG12 | output | LCD segment output line 12; drives LCD segment electrode 12 for 32x8 dot matrix display. |+| 34 | SEG13 | output | LCD segment output line 13; drives LCD segment electrode 13 for 32x8 dot matrix display. |+| 35 | SEG14 | output | LCD segment output line 14; drives LCD segment electrode 14 for 32x8 dot matrix display. |+| 36 | SEG15 | output | LCD segment output line 15; drives LCD segment electrode 15 for 32x8 dot matrix display. |+| 37 | SEG16 | output | LCD segment output line 16; drives LCD segment electrode 16 for 32x8 dot matrix display. |+| 38 | SEG17 | output | LCD segment output line 17; drives LCD segment electrode 17 for 32x8 dot matrix display. |+| 39 | SEG18 | output | LCD segment output line 18; drives LCD segment electrode 18 for 32x8 dot matrix display. |+| 40 | SEG19 | output | LCD segment output line 19; drives LCD segment electrode 19 for 32x8 dot matrix display. |+| 41 | SEG20 | output | LCD segment output line 20; drives LCD segment electrode 20 for 32x8 dot matrix display. |+| 42 | SEG21 | output | LCD segment output line 21; drives LCD segment electrode 21 for 32x8 dot matrix display. |+| 43 | SEG22 | output | LCD segment output line 22; drives LCD segment electrode 22 for 32x8 dot matrix display. |+| 44 | SEG23 | output | LCD segment output line 23; drives LCD segment electrode 23 for 32x8 dot matrix display. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GN Semic |+| Package | LQFP-44(10x10) |+| Category | LED Drivers |+| Pins | 44 |++## CAD (KiCad official)++- Symbol: `GN1622A`+- Footprint: `Package_QFP:LQFP-44_10x10mm_P0.8mm`+- 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)+- 3D model files: `gn1622a-etched.step` / `gn1622a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gn1622a.step` / `gn1622a.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GN Semic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904099856699392) (17 pp, sha256 `ab2cc4d9dd991861`, retrieved 2026-09-18, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gn1622a-datasheet.pdf)
page.jsonadded+359@@ -0,0 +1,359 @@+{+ "slug": "gn1622a",+ "version": "0.1.0",+ "type": "component",+ "description": "GN Semic LCD Drivers, LQFP-44(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "gn1622a",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "gn1622a.kicad_sym",+ "gn1622a.kicad_mod",+ "gn1622a.glb",+ "gn1622a.step",+ "gn1622a.lbr",+ "docs/hero.png",+ "docs/gn1622a-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "GN1622A",+ "manufacturer": "GN Semic",+ "package": "LQFP-44(10x10)",+ "pin_count": 44,+ "category": "LED Drivers",+ "subcategory": "LCD Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904099856699392",+ "parts": {+ "symbol": "gn1622a.kicad_sym",+ "footprint": "gn1622a.kicad_mod",+ "model_3d": "gn1622a-etched.glb",+ "model_3d_plain": "gn1622a.glb",+ "model_3d_step": "gn1622a-etched.step",+ "model_3d_step_plain": "gn1622a.step",+ "lbr": "gn1622a.lbr"+ },+ "distributor_links": {+ "lcsc": "C2758336"+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "Chip Select Input (with internal pull-up resistor); when CS is high, data read/write is disabled and serial interface circuit is reset; when CS is low, data and commands are transferred."+ },+ {+ "number": "2",+ "name": "RD",+ "type": "input",+ "description": "Read Clock (with internal pull-up resistor); data in RAM is output on the falling edge of RD clock."+ },+ {+ "number": "3",+ "name": "WR",+ "type": "input",+ "description": "Write Clock (with internal pull-up resistor); data is stored on the rising edge of WR clock."+ },+ {+ "number": "4",+ "name": "DATA",+ "type": "bidirectional",+ "description": "Serial Data (with internal pull-up resistor) for bidirectional data and command transfer."+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative power supply; ground reference."+ },+ {+ "number": "6",+ "name": "OSCI",+ "type": "input",+ "description": "External oscillator clock input."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply voltage; operating range 2.7V to 5.2V."+ },+ {+ "number": "8",+ "name": "VLCD",+ "type": "input",+ "description": "LCD working voltage input; must be lower than VDD."+ },+ {+ "number": "9",+ "name": "IRQ",+ "type": "output",+ "description": "Interrupt request overflow output; open-drain output that outputs 2 kHz/4 kHz timebase or WDT overflow signal."+ },+ {+ "number": "10",+ "name": "T1",+ "type": "unconnected",+ "description": "Not connected; internal timing signal not available on this package variant."+ },+ {+ "number": "11",+ "name": "T2",+ "type": "unconnected",+ "description": "Not connected; internal timing signal not available on this package variant."+ },+ {+ "number": "12",+ "name": "T3",+ "type": "unconnected",+ "description": "Not connected; internal timing signal not available on this package variant."+ },+ {+ "number": "13",+ "name": "COM0",+ "type": "output",+ "description": "LCD COM output line 0; drives LCD common electrode 0 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "14",+ "name": "COM1",+ "type": "output",+ "description": "LCD COM output line 1; drives LCD common electrode 1 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "15",+ "name": "COM2",+ "type": "output",+ "description": "LCD COM output line 2; drives LCD common electrode 2 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "16",+ "name": "COM3",+ "type": "output",+ "description": "LCD COM output line 3; drives LCD common electrode 3 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "17",+ "name": "COM4",+ "type": "output",+ "description": "LCD COM output line 4; drives LCD common electrode 4 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "18",+ "name": "COM5",+ "type": "output",+ "description": "LCD COM output line 5; drives LCD common electrode 5 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "19",+ "name": "COM6",+ "type": "output",+ "description": "LCD COM output line 6; drives LCD common electrode 6 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "20",+ "name": "COM7",+ "type": "output",+ "description": "LCD COM output line 7; drives LCD common electrode 7 for 1/8 duty cycle, 1/4 bias display."+ },+ {+ "number": "21",+ "name": "SEG0",+ "type": "output",+ "description": "LCD segment output line 0; drives LCD segment electrode 0 for 32x8 dot matrix display."+ },+ {+ "number": "22",+ "name": "SEG1",+ "type": "output",+ "description": "LCD segment output line 1; drives LCD segment electrode 1 for 32x8 dot matrix display."+ },+ {+ "number": "23",+ "name": "SEG2",+ "type": "output",+ "description": "LCD segment output line 2; drives LCD segment electrode 2 for 32x8 dot matrix display."+ },+ {+ "number": "24",+ "name": "SEG3",+ "type": "output",+ "description": "LCD segment output line 3; drives LCD segment electrode 3 for 32x8 dot matrix display."+ },+ {+ "number": "25",+ "name": "SEG4",+ "type": "output",+ "description": "LCD segment output line 4; drives LCD segment electrode 4 for 32x8 dot matrix display."+ },+ {+ "number": "26",+ "name": "SEG5",+ "type": "output",+ "description": "LCD segment output line 5; drives LCD segment electrode 5 for 32x8 dot matrix display."+ },+ {+ "number": "27",+ "name": "SEG6",+ "type": "output",+ "description": "LCD segment output line 6; drives LCD segment electrode 6 for 32x8 dot matrix display."+ },+ {+ "number": "28",+ "name": "SEG7",+ "type": "output",+ "description": "LCD segment output line 7; drives LCD segment electrode 7 for 32x8 dot matrix display."+ },+ {+ "number": "29",+ "name": "SEG8",+ "type": "output",+ "description": "LCD segment output line 8; drives LCD segment electrode 8 for 32x8 dot matrix display."+ },+ {+ "number": "30",+ "name": "SEG9",+ "type": "output",+ "description": "LCD segment output line 9; drives LCD segment electrode 9 for 32x8 dot matrix display."+ },+ {+ "number": "31",+ "name": "SEG10",+ "type": "output",+ "description": "LCD segment output line 10; drives LCD segment electrode 10 for 32x8 dot matrix display."+ },+ {+ "number": "32",+ "name": "SEG11",+ "type": "output",+ "description": "LCD segment output line 11; drives LCD segment electrode 11 for 32x8 dot matrix display."+ },+ {+ "number": "33",+ "name": "SEG12",+ "type": "output",+ "description": "LCD segment output line 12; drives LCD segment electrode 12 for 32x8 dot matrix display."+ },+ {+ "number": "34",+ "name": "SEG13",+ "type": "output",+ "description": "LCD segment output line 13; drives LCD segment electrode 13 for 32x8 dot matrix display."+ },+ {+ "number": "35",+ "name": "SEG14",+ "type": "output",+ "description": "LCD segment output line 14; drives LCD segment electrode 14 for 32x8 dot matrix display."+ },+ {+ "number": "36",+ "name": "SEG15",+ "type": "output",+ "description": "LCD segment output line 15; drives LCD segment electrode 15 for 32x8 dot matrix display."+ },+ {+ "number": "37",+ "name": "SEG16",+ "type": "output",+ "description": "LCD segment output line 16; drives LCD segment electrode 16 for 32x8 dot matrix display."+ },+ {+ "number": "38",+ "name": "SEG17",+ "type": "output",+ "description": "LCD segment output line 17; drives LCD segment electrode 17 for 32x8 dot matrix display."+ },+ {+ "number": "39",+ "name": "SEG18",+ "type": "output",+ "description": "LCD segment output line 18; drives LCD segment electrode 18 for 32x8 dot matrix display."+ },+ {+ "number": "40",+ "name": "SEG19",+ "type": "output",+ "description": "LCD segment output line 19; drives LCD segment electrode 19 for 32x8 dot matrix display."+ },+ {+ "number": "41",+ "name": "SEG20",+ "type": "output",+ "description": "LCD segment output line 20; drives LCD segment electrode 20 for 32x8 dot matrix display."+ },+ {+ "number": "42",+ "name": "SEG21",+ "type": "output",+ "description": "LCD segment output line 21; drives LCD segment electrode 21 for 32x8 dot matrix display."+ },+ {+ "number": "43",+ "name": "SEG22",+ "type": "output",+ "description": "LCD segment output line 22; drives LCD segment electrode 22 for 32x8 dot matrix display."+ },+ {+ "number": "44",+ "name": "SEG23",+ "type": "output",+ "description": "LCD segment output line 23; drives LCD segment electrode 23 for 32x8 dot matrix display."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: BZ and BZ (inverse) buzzer output pins referenced in functional block diagram and application circui"+ ],+ "pages_sent": 17,+ "cost_usd": 0.5894,+ "at": "2026-09-18T01:57:46"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904099856699392",+ "pages": 17,+ "sha256": "ab2cc4d9dd991861",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 44,+ "described": 44,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}