main
Ray
gm485e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
98e00f7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198
{
"schema_version": 1,
"type": "component",
"slug": "gm485e",
"title": "GM485E",
"brief": "GATEMODE RS-485 / RS-422 ICs, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"gm485e"
],
"component": {
"mpn": "GM485E",
"manufacturer": "GATEMODE",
"package": "SOP-8",
"pin_count": 8,
"category": "Interface",
"subcategory": "RS-485 / RS-422 ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/1be9dbc7e43fb1f67867e486859f058c.pdf",
"parts": {
"symbol": "gm485e.kicad_sym",
"footprint": "gm485e.kicad_mod",
"model_3d": "gm485e-etched.glb",
"model_3d_plain": "gm485e.glb",
"model_3d_step": "gm485e-etched.step",
"model_3d_step_plain": "gm485e.step",
"lbr": "gm485e.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "RO",
"type": "output",
"description": "Receiver output. With /RE low, RO is logic high when A-B ≥ -50mV and logic low when A-B ≤ -200mV. Drives a CMOS-level logic output to the host UART Rx."
},
{
"number": "2",
"name": "/RE",
"type": "input",
"description": "Receiver output enable (active low). When /RE is low the RO output is enabled; when /RE is high RO is high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode (ICC ≈ 1nA typ)."
},
{
"number": "3",
"name": "DE",
"type": "input",
"description": "Driver output enable (active high). When DE is high the differential driver A/B is enabled; when DE is low the driver outputs are high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode."
},
{
"number": "4",
"name": "DI",
"type": "input",
"description": "Driver data input. A logic low on DI forces the non-inverting driver output (A) low and the inverting output (B) high; a logic high forces A high and B low. Typically driven by the host UART Tx."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground / device 0V reference."
},
{
"number": "6",
"name": "A",
"type": "bidirectional",
"description": "Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V."
},
{
"number": "7",
"name": "B",
"type": "bidirectional",
"description": "Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Positive supply input, 3.0V ≤ VCC ≤ 5.5V (absolute max +7V). Bypass with a 0.1µF ceramic capacitor to GND close to the pin."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/1be9dbc7e43fb1f67867e486859f058c.pdf",
"pages": 13,
"sha256": "d8116d164fe03f91",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "gm485e.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "gm485e-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d3b2e52ae975e0e1fb70dad8d066a0508a103a9d367b1b7dee881422d78fe1eb",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "GATEMODE",
"Package": "SOP-8",
"Category": "Interface",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"gm485e"
],
"discovery_pitch": "GM485E (GATEMODE) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"gm485e.kicad_sym",
"gm485e.kicad_mod",
"gm485e.glb",
"gm485e.step",
"gm485e.lbr",
"docs/hero.png",
"docs/gm485e-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"gm485e-etched.step"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "GM485E",
"kind": "packaging"
},
{
"mpn": "GM485P",
"kind": "unknown"
}
],
"updated_at": "2026-09-24T21:05:09.923Z"
}