main
Ray
gm485e: laser-etched CAD + chip hero (factory 2.0.0 backfill)
7727d17
GM485E
GATEMODE · RS-485 / RS-422 ICs · SOP-8
GM485E from GATEMODE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output. With /RE low, RO is logic high when A-B ≥ -50mV and logic low when A-B ≤ -200mV. Drives a CMOS-level logic output to the host UART Rx. |
| 2 | /RE | input | Receiver output enable (active low). When /RE is low the RO output is enabled; when /RE is high RO is high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode (ICC ≈ 1nA typ). |
| 3 | DE | input | Driver output enable (active high). When DE is high the differential driver A/B is enabled; when DE is low the driver outputs are high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode. |
| 4 | DI | input | Driver data input. A logic low on DI forces the non-inverting driver output (A) low and the inverting output (B) high; a logic high forces A high and B low. Typically driven by the host UART Tx. |
| 5 | GND | power_in | Ground / device 0V reference. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V. |
| 8 | VCC | power_in | Positive supply input, 3.0V ≤ VCC ≤ 5.5V (absolute max +7V). Bypass with a 0.1µF ceramic capacitor to GND close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GATEMODE |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
GM485EGM485P
CAD (KiCad official)
- Symbol:
GM485E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
gm485e-etched.step/gm485e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gm485e.step/gm485e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GATEMODE datasheet (13 pp, sha256
d8116d164fe03f91, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GM485E
**GATEMODE** · RS-485 / RS-422 ICs · SOP-8
GM485E from GATEMODE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output. With /RE low, RO is logic high when A-B ≥ -50mV and logic low when A-B ≤ -200mV. Drives a CMOS-level logic output to the host UART Rx. |
| 2 | /RE | input | Receiver output enable (active low). When /RE is low the RO output is enabled; when /RE is high RO is high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode (ICC ≈ 1nA typ). |
| 3 | DE | input | Driver output enable (active high). When DE is high the differential driver A/B is enabled; when DE is low the driver outputs are high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode. |
| 4 | DI | input | Driver data input. A logic low on DI forces the non-inverting driver output (A) low and the inverting output (B) high; a logic high forces A high and B low. Typically driven by the host UART Tx. |
| 5 | GND | power_in | Ground / device 0V reference. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V. |
| 8 | VCC | power_in | Positive supply input, 3.0V ≤ VCC ≤ 5.5V (absolute max +7V). Bypass with a 0.1µF ceramic capacitor to GND close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GATEMODE |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `GM485E`
- `GM485P`
## CAD (KiCad official)
- Symbol: `GM485E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `gm485e-etched.step` / `gm485e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gm485e.step` / `gm485e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GATEMODE datasheet](docs/gm485e-datasheet.pdf) (13 pp, sha256 `d8116d164fe03f91`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gm485e-datasheet.pdf)