← Commit history
page.json+9−6@@ -32,13 +32,13 @@ "number": "1", "name": "RO", "type": "output",- "description": "Receiver output. With /RE low, RO is logic high when A-B \u2265 -50mV and logic low when A-B \u2264 -200mV. Drives a CMOS-level logic output to the host UART Rx."+ "description": "Receiver output. With /RE low, RO is logic high when A-B ≥ -50mV and logic low when A-B ≤ -200mV. Drives a CMOS-level logic output to the host UART Rx." }, { "number": "2", "name": "/RE", "type": "input",- "description": "Receiver output enable (active low). When /RE is low the RO output is enabled; when /RE is high RO is high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode (ICC \u2248 1nA typ)."+ "description": "Receiver output enable (active low). When /RE is low the RO output is enabled; when /RE is high RO is high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode (ICC ≈ 1nA typ)." }, { "number": "3",@@ -62,19 +62,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands \u00b115kV HBM and \u00b112kV IEC 61000-4-2 contact discharge; input impedance \u224896k\u03a9 (1/8 unit load). Absolute-max input voltage \u00b113V."+ "description": "Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands \u00b115kV HBM and \u00b112kV IEC 61000-4-2 contact discharge; input impedance \u224896k\u03a9 (1/8 unit load). Absolute-max input voltage \u00b113V."+ "description": "Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply input, 3.0V \u2264 VCC \u2264 5.5V (absolute max +7V). Bypass with a 0.1\u00b5F ceramic capacitor to GND close to the pin."+ "description": "Positive supply input, 3.0V ≤ VCC ≤ 5.5V (absolute max +7V). Bypass with a 0.1µF ceramic capacitor to GND close to the pin." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/gm485e-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }