← Commit history

gm485e: factory component page (tier=lcsc)

Ray ·ef4f3bc01e · ·parent cbbbcef
3 files changed +26−23
README.md+8−8
@@ -8,14 +8,14 @@ GM485E from GATEMODE, in a SOP-8. Pinout and pin descriptions extracted from the  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RO | output | Receiver output. When /RE is low: RO is high if (A-B) ≥ -50 mV, low if (A-B) ≤ -200 mV. When /RE is high, RO is high-impedance. VOH ≥ VCC-1.5 V at IO=-4 mA; VOL ≤ 0.4 V at IO=4 mA. |-| 2 | /RE | input | Receiver output enable, active-low. Drive low to enable RO; drive high to tri-state RO. If /RE is high and DE is low simultaneously, the device enters low-power shutdown mode (ISHDN typ 1 nA). |-| 3 | DE | input | Driver output enable, active-high. Drive high to enable the differential A/B driver outputs; drive low to tri-state them. If DE is low and /RE is high, the device enters low-power shutdown mode. |-| 4 | DI | input | Driver logic input. When DE is high, a logic low on DI forces the non-inverting bus output (A) low and inverting output (B) high; a logic high on DI forces A high and B low. VIH ≥ 2.0 V, VIL ≤ 0.8 V. |-| 5 | GND | power_in | Device ground reference (0 V). |-| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output on the RS-485/RS-422 differential bus. Absolute max ±13 V; 96 kΩ input impedance (1/8 unit load) allows up to 256 receivers on one bus. ESD-protected to ±15 kV HBM and ±12 kV IEC 61000-4-2 contact. |-| 7 | B | bidirectional | Inverting receiver input and inverting driver output on the RS-485/RS-422 differential bus. Absolute max ±13 V; 96 kΩ input impedance (1/8 unit load). ESD-protected to ±15 kV HBM and ±12 kV IEC 61000-4-2 contact. |-| 8 | VCC | power_in | Positive supply input, 3.0 V ≤ VCC ≤ 5.5 V (absolute max +7 V). Quiescent ICC typ 155 µA (DE=VCC) / 160 µA (DE=GND) with no load; shutdown current typ 1 nA. Bypass locally with a 0.1 µF ceramic to GND. |+| 1 | RO | output | Receiver output. With /RE low, RO is logic high when A-B ≥ -50mV and logic low when A-B ≤ -200mV. Drives a CMOS-level logic output to the host UART Rx. |+| 2 | /RE | input | Receiver output enable (active low). When /RE is low the RO output is enabled; when /RE is high RO is high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode (ICC ≈ 1nA typ). |+| 3 | DE | input | Driver output enable (active high). When DE is high the differential driver A/B is enabled; when DE is low the driver outputs are high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode. |+| 4 | DI | input | Driver data input. A logic low on DI forces the non-inverting driver output (A) low and the inverting output (B) high; a logic high forces A high and B low. Typically driven by the host UART Tx. |+| 5 | GND | power_in | Ground / device 0V reference. |+| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V. |+| 7 | B | bidirectional | Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands ±15kV HBM and ±12kV IEC 61000-4-2 contact discharge; input impedance ≈96kΩ (1/8 unit load). Absolute-max input voltage ±13V. |+| 8 | VCC | power_in | Positive supply input, 3.0V ≤ VCC ≤ 5.5V (absolute max +7V). Bypass with a 0.1µF ceramic capacitor to GND close to the pin. |  ## Key specifications 
gm485e.lbr+9−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>GATEMODE RS-485 / RS-422 ICs, SOP-8</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="GM485E">+  <description>GATEMODE RS-485 / RS-422 ICs, SOP-8</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="GM485E" prefix="U">-  <description></description>+  <description>GATEMODE RS-485 / RS-422 ICs, SOP-8</description>   <gates>     <gate name="G$1" symbol="GM485E" x="0" y="0"/>   </gates>@@ -120,7 +121,12 @@         <connect gate="G$1" pin="A" pad="6"/>         <connect gate="G$1" pin="GND" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="GM485E" constant="no"/>+          <attribute name="MANUFACTURER" value="GATEMODE" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
page.json+9−12
@@ -32,49 +32,49 @@         "number": "1",         "name": "RO",         "type": "output",-        "description": "Receiver output. When /RE is low: RO is high if (A-B) ≥ -50 mV, low if (A-B) ≤ -200 mV. When /RE is high, RO is high-impedance. VOH ≥ VCC-1.5 V at IO=-4 mA; VOL ≤ 0.4 V at IO=4 mA."+        "description": "Receiver output. With /RE low, RO is logic high when A-B \u2265 -50mV and logic low when A-B \u2264 -200mV. Drives a CMOS-level logic output to the host UART Rx."       },       {         "number": "2",         "name": "/RE",         "type": "input",-        "description": "Receiver output enable, active-low. Drive low to enable RO; drive high to tri-state RO. If /RE is high and DE is low simultaneously, the device enters low-power shutdown mode (ISHDN typ 1 nA)."+        "description": "Receiver output enable (active low). When /RE is low the RO output is enabled; when /RE is high RO is high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode (ICC \u2248 1nA typ)."       },       {         "number": "3",         "name": "DE",         "type": "input",-        "description": "Driver output enable, active-high. Drive high to enable the differential A/B driver outputs; drive low to tri-state them. If DE is low and /RE is high, the device enters low-power shutdown mode."+        "description": "Driver output enable (active high). When DE is high the differential driver A/B is enabled; when DE is low the driver outputs are high-impedance. If /RE is high AND DE is low the device enters low-power shutdown mode."       },       {         "number": "4",         "name": "DI",         "type": "input",-        "description": "Driver logic input. When DE is high, a logic low on DI forces the non-inverting bus output (A) low and inverting output (B) high; a logic high on DI forces A high and B low. VIH ≥ 2.0 V, VIL ≤ 0.8 V."+        "description": "Driver data input. A logic low on DI forces the non-inverting driver output (A) low and the inverting output (B) high; a logic high forces A high and B low. Typically driven by the host UART Tx."       },       {         "number": "5",         "name": "GND",         "type": "power_in",-        "description": "Device ground reference (0 V)."+        "description": "Ground / device 0V reference."       },       {         "number": "6",         "name": "A",         "type": "bidirectional",-        "description": "Non-inverting receiver input and non-inverting driver output on the RS-485/RS-422 differential bus. Absolute max ±13 V; 96 kΩ input impedance (1/8 unit load) allows up to 256 receivers on one bus. ESD-protected to ±15 kV HBM and ±12 kV IEC 61000-4-2 contact."+        "description": "Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands \u00b115kV HBM and \u00b112kV IEC 61000-4-2 contact discharge; input impedance \u224896k\u03a9 (1/8 unit load). Absolute-max input voltage \u00b113V."       },       {         "number": "7",         "name": "B",         "type": "bidirectional",-        "description": "Inverting receiver input and inverting driver output on the RS-485/RS-422 differential bus. Absolute max ±13 V; 96 kΩ input impedance (1/8 unit load). ESD-protected to ±15 kV HBM and ±12 kV IEC 61000-4-2 contact."+        "description": "Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands \u00b115kV HBM and \u00b112kV IEC 61000-4-2 contact discharge; input impedance \u224896k\u03a9 (1/8 unit load). Absolute-max input voltage \u00b113V."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply input, 3.0 V ≤ VCC ≤ 5.5 V (absolute max +7 V). Quiescent ICC typ 155 µA (DE=VCC) / 160 µA (DE=GND) with no load; shutdown current typ 1 nA. Bypass locally with a 0.1 µF ceramic to GND."+        "description": "Positive supply input, 3.0V \u2264 VCC \u2264 5.5V (absolute max +7V). Bypass with a 0.1\u00b5F ceramic capacitor to GND close to the pin."       }     ],     "provenance": {@@ -138,8 +138,5 @@     "docs/gm485e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file