main
Ray Publish 0.1.0 06e8ad4

GM12041ARDZ-R7

GONGMOSEMI · Linear Voltage Regulators (LDO) · SOIC-8

GM12041ARDZ-R7 from GONGMOSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output pin; a 10μF or larger ceramic capacitor from OUT to GND should be placed as close to the pin as possible for stability.
2 SENSE/ADJ input Feedback pin to the error amplifier; the ADJ pin voltage is 1.21V relative to GND, with an adjustable output range of 1.21V to 20V.
3 GND power_in Ground pin.
4 NC unconnected Not connected.
5 SHDN input Shutdown pin; pull high to enable the device and low to disable it, and connect to IN if the enable function is not needed.
6 GND power_in Ground pin.
7 GND power_in Ground pin.
8 IN power_in Input pin; a 10μF or larger ceramic capacitor from IN to GND should be placed close to the pin to reduce input impedance.

Key specifications

Parameter Value
Manufacturer GONGMOSEMI
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
UVLO rising threshold VUVLO_RISING 1.75 1.89 V VIN 上升 9
UVLO falling threshold VUVLO_FALLING 1.55 1.68 V VIN 下降 9
GND pin current IGND 0.9 1.7 mA ILOAD = 0mA 9
GND pin current IGND 1.4 2.2 mA ILOAD = 100mA 9
GND pin current IGND 2.7 3.9 mA ILOAD = 1.5A 9
Shutdown current ISHUTDOWN 0.9 10 μA VIN = 6V, VSHDN = 0V, TJ = 25°C 9
ADJ pin accuracy VADJ 1.18 1.21 1.24 V 1.9V < VIN < 20V, 1mA < ILOAD < 1.5A 9
Input voltage regulation ΔVOUT_LINE 2 8 mV VIN = max(VOUT + 0.5V, 1.9 V) to 20 V, ILOAD = 10mA 9
Load regulation ΔVOUT_LOAD 3 15 mV 1 mA ≤ IOUT ≤ 1.5 A 9
Dropout voltage VDO 70 146 mV VIN = 3.3 V, IOUT = 100 mA, VFB = 0.5 V, 3% 9
Dropout voltage VDO 160 270 mV VIN = 3.3 V, IOUT = 1.5 A, VFB = 0.5 V, 3% 9
Output current limit ILIM 2.2 A VOUT 外加 0.9 × VOUT(nom), VIN = VOUT(nom) + 0.5 V 9
SHDN pin low-level input voltage VSHDN_IL 0.49 0.75 V 9
SHDN pin high-level input voltage VSHDN_IH 0.79 1.1 V 9
SHDN pin current ISHDN 50 750 nA VIN = 20 V, TJ = 25°C 9
Power supply ripple rejection PSRR 80 dB f = 100 Hz, VOUT - VOUT = 1 V, ILOAD = 1.5 A 9
Power supply ripple rejection PSRR 75 dB f = 10 kHz, VOUT - VOUT = 1 V, ILOAD = 1.5 A 9
Output voltage noise VN 9.8 μVRMS 带宽 = 10 Hz to 100 kHz, IOUT = 1.5 A 9
Thermal shutdown temperature TSD 155 °C 关断阈值,温度上升 9
Thermal shutdown hysteresis TSD_HYS 15 °C 开机阈值,温度下降 9
IN and SHDN voltage to GND -0.3 22 V IN, SHDN to GND 8
OUT voltage to GND -0.3 22 V OUT to GND 8
SENSE/ADJ voltage to GND -0.3 6 V SENSE/ADJ to GND 8
Storage temperature range -65 150 °C 8
Operating temperature range -40 125 °C 工作温度范围 8
Junction-to-ambient thermal resistance θJA 67 °C/W 8 引脚 SOIC, JEDEC 高有效导热板 8
Input voltage VIN 1.9 20 V 14
Output voltage (adjustable) VOUT 1.21 20 V 可调输出 14
Junction temperature for reliable operation TJ 125 °C 为了可靠运行,结温限制在最大 125°C 13
Output capacitor ESR ESR 3 Ω 建议最小输出电容 10μF,防止振荡 14

CAD (KiCad official)

  • Symbol: GM12041ARDZ-R7
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: gm12041ardz-r7-etched.step / gm12041ardz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gm12041ardz-r7.step / gm12041ardz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GONGMOSEMI datasheet (20 pp, sha256 b0731d7ae1fd05a4, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF