3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGM12041ARDZ-R7
GONGMOSEMI · Linear Voltage Regulators (LDO) · SOIC-8
GM12041ARDZ-R7 from GONGMOSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output pin; a 10μF or larger ceramic capacitor from OUT to GND should be placed as close to the pin as possible for stability. |
| 2 | SENSE/ADJ | input | Feedback pin to the error amplifier; the ADJ pin voltage is 1.21V relative to GND, with an adjustable output range of 1.21V to 20V. |
| 3 | GND | power_in | Ground pin. |
| 4 | NC | unconnected | Not connected. |
| 5 | SHDN | input | Shutdown pin; pull high to enable the device and low to disable it, and connect to IN if the enable function is not needed. |
| 6 | GND | power_in | Ground pin. |
| 7 | GND | power_in | Ground pin. |
| 8 | IN | power_in | Input pin; a 10μF or larger ceramic capacitor from IN to GND should be placed close to the pin to reduce input impedance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GONGMOSEMI |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| UVLO rising threshold | VUVLO_RISING | 1.75 | 1.89 | V | VIN 上升 | 9 | |
| UVLO falling threshold | VUVLO_FALLING | 1.55 | 1.68 | V | VIN 下降 | 9 | |
| GND pin current | IGND | 0.9 | 1.7 | mA | ILOAD = 0mA | 9 | |
| GND pin current | IGND | 1.4 | 2.2 | mA | ILOAD = 100mA | 9 | |
| GND pin current | IGND | 2.7 | 3.9 | mA | ILOAD = 1.5A | 9 | |
| Shutdown current | ISHUTDOWN | 0.9 | 10 | μA | VIN = 6V, VSHDN = 0V, TJ = 25°C | 9 | |
| ADJ pin accuracy | VADJ | 1.18 | 1.21 | 1.24 | V | 1.9V < VIN < 20V, 1mA < ILOAD < 1.5A | 9 |
| Input voltage regulation | ΔVOUT_LINE | 2 | 8 | mV | VIN = max(VOUT + 0.5V, 1.9 V) to 20 V, ILOAD = 10mA | 9 | |
| Load regulation | ΔVOUT_LOAD | 3 | 15 | mV | 1 mA ≤ IOUT ≤ 1.5 A | 9 | |
| Dropout voltage | VDO | 70 | 146 | mV | VIN = 3.3 V, IOUT = 100 mA, VFB = 0.5 V, 3% | 9 | |
| Dropout voltage | VDO | 160 | 270 | mV | VIN = 3.3 V, IOUT = 1.5 A, VFB = 0.5 V, 3% | 9 | |
| Output current limit | ILIM | 2.2 | A | VOUT 外加 0.9 × VOUT(nom), VIN = VOUT(nom) + 0.5 V | 9 | ||
| SHDN pin low-level input voltage | VSHDN_IL | 0.49 | 0.75 | V | 9 | ||
| SHDN pin high-level input voltage | VSHDN_IH | 0.79 | 1.1 | V | 9 | ||
| SHDN pin current | ISHDN | 50 | 750 | nA | VIN = 20 V, TJ = 25°C | 9 | |
| Power supply ripple rejection | PSRR | 80 | dB | f = 100 Hz, VOUT - VOUT = 1 V, ILOAD = 1.5 A | 9 | ||
| Power supply ripple rejection | PSRR | 75 | dB | f = 10 kHz, VOUT - VOUT = 1 V, ILOAD = 1.5 A | 9 | ||
| Output voltage noise | VN | 9.8 | μVRMS | 带宽 = 10 Hz to 100 kHz, IOUT = 1.5 A | 9 | ||
| Thermal shutdown temperature | TSD | 155 | °C | 关断阈值,温度上升 | 9 | ||
| Thermal shutdown hysteresis | TSD_HYS | 15 | °C | 开机阈值,温度下降 | 9 | ||
| IN and SHDN voltage to GND | -0.3 | 22 | V | IN, SHDN to GND | 8 | ||
| OUT voltage to GND | -0.3 | 22 | V | OUT to GND | 8 | ||
| SENSE/ADJ voltage to GND | -0.3 | 6 | V | SENSE/ADJ to GND | 8 | ||
| Storage temperature range | -65 | 150 | °C | 8 | |||
| Operating temperature range | -40 | 125 | °C | 工作温度范围 | 8 | ||
| Junction-to-ambient thermal resistance | θJA | 67 | °C/W | 8 引脚 SOIC, JEDEC 高有效导热板 | 8 | ||
| Input voltage | VIN | 1.9 | 20 | V | 14 | ||
| Output voltage (adjustable) | VOUT | 1.21 | 20 | V | 可调输出 | 14 | |
| Junction temperature for reliable operation | TJ | 125 | °C | 为了可靠运行,结温限制在最大 125°C | 13 | ||
| Output capacitor ESR | ESR | 3 | Ω | 建议最小输出电容 10μF,防止振荡 | 14 |
CAD (KiCad official)
- Symbol:
GM12041ARDZ-R7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
gm12041ardz-r7-etched.step/gm12041ardz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gm12041ardz-r7.step/gm12041ardz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GONGMOSEMI datasheet (20 pp, sha256
b0731d7ae1fd05a4, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).