GM1203BACPZ-3-R7

{
  "slug": "gm1203bacpz-3-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "GONGMOSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "gm1203bacpz-3-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gm1203bacpz-3-r7.kicad_sym",
    "gm1203bacpz-3-r7.kicad_mod",
    "gm1203bacpz-3-r7.glb",
    "gm1203bacpz-3-r7.step",
    "gm1203bacpz-3-r7.lbr",
    "docs/hero.png",
    "docs/gm1203bacpz-3-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "gm1203bacpz-3-r7-hero.glb",
    "gm1203bacpz-3-r7-hero.overlay.json",
    "gm1203bacpz-3-r7-etched.glb"
  ],
  "component": {
    "mpn": "GM1203BACPZ-3-R7",
    "manufacturer": "GONGMOSEMI",
    "package": "QFN-20(3.5x3.5)",
    "pin_count": 21,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8773173072184922112",
    "parts": {
      "symbol": "gm1203bacpz-3-r7.kicad_sym",
      "footprint": "gm1203bacpz-3-r7.kicad_mod",
      "model_3d": "gm1203bacpz-3-r7-hero.glb",
      "model_3d_plain": "gm1203bacpz-3-r7-etched.glb",
      "model_3d_step": "gm1203bacpz-3-r7-etched.step",
      "model_3d_step_plain": "gm1203bacpz-3-r7.step",
      "lbr": "gm1203bacpz-3-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C20421905"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T03:22:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output; a ceramic capacitor of at least 47 µF is required from this pin to GND, placed as close to the pin as possible."
      },
      {
        "number": "2",
        "name": "SNS",
        "type": "input",
        "description": "Output sense pin, connected internally to the output through an R0 resistor; connect it to the load side of the output only when the VOUT programming pins are used, otherwise leave it floating."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin to the error amplifier; a 10 nF feed-forward capacitor from FB to OUT, placed close to the device, is recommended, and FB to GND is rated −0.3 V to +3.6 V."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output (active high) that indicates when the output reaches the PG rising threshold; use an external pull-up of 10 kΩ to 100 kΩ, and PG to GND is rated −0.3 V to +7 V with a PG current limit of −5 mA."
      },
      {
        "number": "5",
        "name": "50mV",
        "type": "input",
        "description": "Output-voltage programming pin for the 50 mV step; connect to GND or SNS or leave floating, where grounding it adds 50 mV to the output voltage, and it is rated −0.3 V to VOUT+0.3 V."
      },
      {
        "number": "6",
        "name": "100mV",
        "type": "input",
        "description": "Output-voltage programming pin for the 100 mV step; connect to GND or SNS or leave floating, where grounding it adds 100 mV to the output voltage, and it is rated −0.3 V to VOUT+0.3 V."
      },
      {
        "number": "7",
        "name": "200mV",
        "type": "input",
        "description": "Output-voltage programming pin for the 200 mV step; connect to GND or SNS or leave floating, where grounding it adds 200 mV to the output voltage, and it is rated −0.3 V to VOUT+0.3 V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected to the other GND pins and the exposed pad through a low-impedance path."
      },
      {
        "number": "9",
        "name": "400mV",
        "type": "input",
        "description": "Output-voltage programming pin for the 400 mV step; connect to GND or SNS or leave floating, where grounding it adds 400 mV to the output voltage, and it is rated −0.3 V to VOUT+0.3 V."
      },
      {
        "number": "10",
        "name": "800mV",
        "type": "input",
        "description": "Output-voltage programming pin for the 800 mV step; connect to GND or SNS or leave floating, where grounding it adds 800 mV to the output voltage, and it is rated −0.3 V to VOUT+0.3 V."
      },
      {
        "number": "11",
        "name": "1.6V",
        "type": "input",
        "description": "Output-voltage programming pin for the 1.6 V step; connect to GND or SNS or leave floating, where grounding it adds 1.6 V to the output voltage, and it is rated −0.3 V to VOUT+0.3 V."
      },
      {
        "number": "12",
        "name": "BIAS",
        "type": "power_in",
        "description": "Bias supply pin that improves DC and AC performance and reduces power dissipation at VIN ≤ 2.2 V; it requires a 10 µF or larger capacitor to GND, and it must be left floating or grounded if unused."
      },
      {
        "number": "13",
        "name": "NR/SS",
        "type": "passive",
        "description": "Noise-reduction and soft-start pin with an external capacitor to GND; a 10 nF or larger capacitor is recommended, and the pin is rated −0.3 V to +3.6 V."
      },
      {
        "number": "14",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: drive above 1.1 V to enable the device and below 0.4 V to disable it, and connect it to IN or BIAS if enable control is not used."
      },
      {
        "number": "15",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin that requires a ceramic capacitor of 10 µF or larger to GND placed close to the input, with an input voltage range of 1.1 V to 6.5 V."
      },
      {
        "number": "16",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin that requires a ceramic capacitor of 10 µF or larger to GND placed close to the input, with an input voltage range of 1.1 V to 6.5 V."
      },
      {
        "number": "17",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin that requires a ceramic capacitor of 10 µF or larger to GND placed close to the input, with an input voltage range of 1.1 V to 6.5 V."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected to the other GND pins and the exposed pad through a low-impedance path."
      },
      {
        "number": "19",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output; a ceramic capacitor of at least 47 µF is required from OUT to GND, placed as close to the pin as possible."
      },
      {
        "number": "20",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output; a ceramic capacitor of at least 47 µF is required from OUT to GND, placed as close to the pin as possible."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering guide lists GM1203BACPZ-3-R7 as QFN-20, 3.5mm x 3.5mm, CP-20-1, so the 3.5 mm pinout fr; The exposed pad is printed without a pin number in the datasheet. It is listed as 'EPAD' and should ; The datasheet gives no pin type. These types are inferred from the function text: SNS and the progra",
          "exposed pad 21 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 25,
        "cost_usd": 0.106,
        "at": "2026-10-19T03:22:15"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8773173072184922112",
        "pages": 25,
        "sha256": "f744d3090b584d94",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gm1203bacpz-3-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b23346a89b70c294c22e6bc84d9a50fcf43b9f05bde6641cc3e3fddef52f7ab0",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gm1203bacpz-3-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2e673c4a1cc57d875dae6b48ba1b4eb2278239d6708f28529e9bf8703f91b339",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}