JST GHR-03V-S keyed cable housing
Public Made by Adomby adom
GH keyed cable housing; exact identity, native assets and provenance, with physical fit unqualified.
JST GHR-03V-S keyed cable housing
JST GH 1.25 mm keyed cable housing, with portable native KiCad documentation and explicitly provisional nominal geometry.
Manufacturer GH drawing · JST handling precautions
The keyed GH family uses SSHL-002T-P0.2 contacts. SSHL-003 variants are not compatible. Applicable wire range is AWG30–26 with insulation diameter0.76–1.00mm. Series rating is1A with AWG26,50V; −40 to105°C including current-related heating. These ratings are not a guarantee for every harness wire or application.
Empty three-position housing:5.00mm width,4.15mm overall depth,5.70mm height,1.25mm contact pitch. Order one SSHL-002T-P0.2 per populated circuit. The STEP is an original simplified exterior with illustrative latch and passages; it does not prove engagement or contact retention. The symbol documents a harness (on_board=no); the zero-pad footprint is only a mechanical envelope.
Use JST's specified tooling and establish the contact-specific conductor/insulation crimp settings with the actual wire. General handling guidance calls for stranded tin-plated annealed copper wire; solder-dipped end preparation requires separate review. Physical retention, pull test, mating orientation, installed cable bend and service-life qualification remain open. Native asset validation and live wiki review are recorded separately; publication is not hardware approval.
Reusable assets
Native symbol · Interactive symbol · Native footprint · Interactive footprint · STEP
Local top, underside and oblique renders have been reviewed. Live wiki rendering remains pending; see provenance.json.
This off-board component has no copper pads. Its plain GLB is retained under the documented zero-pad hero limitation; no fictitious PCB pads are added.
# JST GHR-03V-S keyed cable housing
JST GH 1.25 mm keyed cable housing, with portable native KiCad documentation and explicitly provisional nominal geometry.
[Manufacturer GH drawing](https://www.jst-mfg.com/product/pdf/eng/eGH.pdf) · [JST handling precautions](https://www.jst-mfg.com/product/pdf/eng/handling_e.pdf)
The keyed GH family uses **SSHL-002T-P0.2** contacts. SSHL-003 variants are not compatible. Applicable wire range is AWG30–26 with insulation diameter0.76–1.00mm. Series rating is1A with AWG26,50V; −40 to105°C including current-related heating. These ratings are not a guarantee for every harness wire or application.
Empty three-position housing:5.00mm width,4.15mm overall depth,5.70mm height,1.25mm contact pitch. Order one SSHL-002T-P0.2 per populated circuit. The STEP is an original simplified exterior with illustrative latch and passages; it does not prove engagement or contact retention. The symbol documents a harness (`on_board=no`); the zero-pad footprint is only a mechanical envelope.
Use JST's specified tooling and establish the contact-specific conductor/insulation crimp settings with the actual wire. General handling guidance calls for stranded tin-plated annealed copper wire; solder-dipped end preparation requires separate review. Physical retention, pull test, mating orientation, installed cable bend and service-life qualification remain open. Native asset validation and live wiki review are recorded separately; publication is not hardware approval.
## Reusable assets
[Native symbol](ghr-03v-s.kicad_sym) · [Interactive symbol](symbol.html) · [Native footprint](ghr-03v-s.kicad_mod) · [Interactive footprint](footprint.html) · [STEP](ghr-03v-s.step)
Local top, underside and oblique renders have been reviewed. Live wiki rendering remains pending; see provenance.json.
This off-board component has no copper pads. Its plain GLB is retained under the documented [zero-pad hero limitation](https://wiki.adom.inc/adom/component-hero/issues/1); no fictitious PCB pads are added.