main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers gh125-s08cca-00: viewers · Ray
gh125-s08cca-00-hero.glb Publish 0.1.0 · Ray
gh125-s08cca-00-hero.overlay.json Publish 0.1.0 · Ray
gh125-s08cca-00.glb Publish 0.1.0 · Ray
gh125-s08cca-00.kicad_mod Publish 0.1.0 · Ray
gh125-s08cca-00.kicad_sym Publish 0.1.0 · Ray
gh125-s08cca-00.lbr Publish 0.1.0 · Ray
gh125-s08cca-00.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

GH125-S08CCA-00

JUSHUO · Wire To Board Connector · JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical

GH125-S08CCA-00 from JUSHUO, in a JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Contact 1; numbering follows the footprint.
2 2 passive Contact 2; numbering follows the footprint.
3 3 passive Contact 3; numbering follows the footprint.
4 4 passive Contact 4; numbering follows the footprint.
5 5 passive Contact 5; numbering follows the footprint.
6 6 passive Contact 6; numbering follows the footprint.
7 7 passive Contact 7; numbering follows the footprint.
8 8 passive Contact 8; numbering follows the footprint.

Key specifications

Parameter Value
Manufacturer JUSHUO
Package JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical
Category Connectors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Rated voltage 50 V 4
Rated current 1 A AC/DC 4
Operating temperature range -25 85 °C 4
Operating humidity range (relative humidity) 90 % Relative humidity below 90% 4
Contact resistance (initial) 20 mΩ Mated connector, measured across two terminals with contact resistance meter 5
Insulation resistance 500 MΩ 100 V DC applied for 1 minute between adjacent contacts and between contacts and enclosure 5
Contact resistance after heating test 60 mΩ +85°C ±2°C for 96 H, then 1-2 H at normal environment 5
Contact resistance after cold test 60 mΩ -25°C ±2°C for 96 H, then 1-2 H at normal environment 5
Insulation resistance after moisture resistance test 60 MΩ 40°C ±2°C, 90-96% RH for 96 H, then 1-2 H at normal environment; measured between adjacent contacts and contacts-enclosure as tested 5
Withstand voltage after moisture resistance test 250 V AC Applied for 1 minute after 40°C ±2°C, 90-96% RH for 96 H 5
Contact resistance after temperature cycle test 60 mΩ 5 cycles of -25°C ±3°C / +85°C ±3°C, 30 min each with 1 H at room temperature, then 2 H recovery 6
Contact resistance after salt spray test 60 mΩ Continuous salt spray 24 H with (5±1)% NaCl solution 6
Contact resistance after mechanical life test 80 mΩ Unpowered, 30 plug/unplug cycles at 10 cycles/min 8
Pin fixing force (single pin) 5 N Pin pulled from pin holder at 25±3 mm/min 8
Terminal retention force in plastic part (single terminal) 7 N Terminal pulled from housing at 25±3 mm/min along conductor direction 8
Terminal crimp pull-out force, 26AWG wire 17.8 N 26AWG wire, axial pull at 25±3 mm/min 8
Terminal crimp pull-out force, 28AWG wire 8.9 N 28AWG wire, axial pull at 25±3 mm/min 8
Terminal crimp pull-out force, 30AWG wire 4.4 N 30AWG wire, axial pull at 25±3 mm/min 8
Terminal crimp pull-out force, 32AWG wire 2.2 N 32AWG wire, axial pull at 25±3 mm/min 8
Insertion force (per pin) 2 N Mating test at 20±5 mm/min, hole-seat lock removed 8
Pullout force (per pin) 0.3 N Mating test at 20±5 mm/min, hole-seat lock removed 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing LCP 基座 base GH LCP E130i 4
contacts 磷铜 插针 pin GH 磷铜 Phosphor copper 4

CAD (KiCad official)

  • Symbol: GH125-S08CCA-00
  • Footprint: Connector_JST:JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical
  • 3D model: JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary connector numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF