3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownGH125-S08CCA-00
JUSHUO · Wire To Board Connector · JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical
GH125-S08CCA-00 from JUSHUO, in a JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JUSHUO |
| Package | JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical |
| Category | Connectors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated voltage | 50 | V | 4 | ||||
| Rated current | 1 | A | AC/DC | 4 | |||
| Operating temperature range | -25 | 85 | °C | 4 | |||
| Operating humidity range (relative humidity) | 90 | % | Relative humidity below 90% | 4 | |||
| Contact resistance (initial) | 20 | mΩ | Mated connector, measured across two terminals with contact resistance meter | 5 | |||
| Insulation resistance | 500 | MΩ | 100 V DC applied for 1 minute between adjacent contacts and between contacts and enclosure | 5 | |||
| Contact resistance after heating test | 60 | mΩ | +85°C ±2°C for 96 H, then 1-2 H at normal environment | 5 | |||
| Contact resistance after cold test | 60 | mΩ | -25°C ±2°C for 96 H, then 1-2 H at normal environment | 5 | |||
| Insulation resistance after moisture resistance test | 60 | MΩ | 40°C ±2°C, 90-96% RH for 96 H, then 1-2 H at normal environment; measured between adjacent contacts and contacts-enclosure as tested | 5 | |||
| Withstand voltage after moisture resistance test | 250 | V AC | Applied for 1 minute after 40°C ±2°C, 90-96% RH for 96 H | 5 | |||
| Contact resistance after temperature cycle test | 60 | mΩ | 5 cycles of -25°C ±3°C / +85°C ±3°C, 30 min each with 1 H at room temperature, then 2 H recovery | 6 | |||
| Contact resistance after salt spray test | 60 | mΩ | Continuous salt spray 24 H with (5±1)% NaCl solution | 6 | |||
| Contact resistance after mechanical life test | 80 | mΩ | Unpowered, 30 plug/unplug cycles at 10 cycles/min | 8 | |||
| Pin fixing force (single pin) | 5 | N | Pin pulled from pin holder at 25±3 mm/min | 8 | |||
| Terminal retention force in plastic part (single terminal) | 7 | N | Terminal pulled from housing at 25±3 mm/min along conductor direction | 8 | |||
| Terminal crimp pull-out force, 26AWG wire | 17.8 | N | 26AWG wire, axial pull at 25±3 mm/min | 8 | |||
| Terminal crimp pull-out force, 28AWG wire | 8.9 | N | 28AWG wire, axial pull at 25±3 mm/min | 8 | |||
| Terminal crimp pull-out force, 30AWG wire | 4.4 | N | 30AWG wire, axial pull at 25±3 mm/min | 8 | |||
| Terminal crimp pull-out force, 32AWG wire | 2.2 | N | 32AWG wire, axial pull at 25±3 mm/min | 8 | |||
| Insertion force (per pin) | 2 | N | Mating test at 20±5 mm/min, hole-seat lock removed | 8 | |||
| Pullout force (per pin) | 0.3 | N | Mating test at 20±5 mm/min, hole-seat lock removed | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | 基座 base GH LCP E130i | 4 | |
| contacts | 磷铜 | 插针 pin GH 磷铜 Phosphor copper | 4 |
CAD (KiCad official)
- Symbol:
GH125-S08CCA-00 - Footprint:
Connector_JST:JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical - 3D model: JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).