component
GD32F205RET6
Public Made by Adomby adom
GigaDevice Semicon Beijing Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
GD32F205RET6
GigaDevice Semicon Beijing · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
GD32F205RET6 from GigaDevice Semicon Beijing, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply pin, listed with the default function VBAT only in the pin definition table, with no voltage limit given there. |
| 2 | PC13-TAMPER-RTC | bidirectional | General-purpose I/O PC13 with alternate function TAMPER-RTC. |
| 3 | PC14-OSC32IN | bidirectional | General-purpose I/O PC14 with alternate function OSC32IN. |
| 4 | PC15-OSC32OUT | bidirectional | General-purpose I/O PC15 with alternate function OSC32OUT. |
| 5 | OSCIN | input | Default function OSCIN, remappable to PD0; the clock tree gives the HXTAL range as 4-32 MHz. |
| 6 | OSCOUT | output | Default function OSCOUT, remappable to PD1. |
| 7 | NRST | bidirectional | Reset pin with default function NRST; its electrical characteristics are given in datasheet section 4.11. |
| 8 | PC0 | bidirectional | General-purpose I/O PC0 with ADC012_IN10 analog input; remap EXMC_SDNWE. |
| 9 | PC1 | bidirectional | General-purpose I/O PC1 with ADC012_IN11 analog input. |
| 10 | PC2 | bidirectional | General-purpose I/O PC2 with ADC012_IN12 analog input; remap EXMC_SDNE0 and SPI1_MISO. |
| 11 | PC3 | bidirectional | General-purpose I/O PC3 with ADC012_IN13 analog input; remap EXMC_SDCKE0, SPI1_MOSI and I2S1_SD. |
| 12 | VSSA | power_in | Analog ground pin VSSA as listed in the pin definition table. |
| 13 | VDDA | power_in | Analog supply pin VDDA; the block diagram shows the LVD and SAR ADC powered by VDDA. |
| 14 | PA0-WKUP | bidirectional | General-purpose I/O PA0 with WKUP, ADC012_IN0, USART1_CTS and timer alternate functions; remap UART3_TX. |
| 15 | PA1 | bidirectional | General-purpose I/O PA1 with ADC012_IN1, USART1_RTS and timer alternate functions; remap UART3_RX. |
| 16 | PA2 | bidirectional | General-purpose I/O PA2 with ADC012_IN2, USART1_TX, timer alternate functions and SPI0_IO3. |
| 17 | PA3 | bidirectional | General-purpose I/O PA3 with ADC012_IN3, USART1_RX, timer alternate functions and SPI0_IO4; remap TLI_B5. |
| 18 | VSS_4 | power_in | Ground pin VSS_4 as listed in the pin definition table. |
| 19 | VDD_4 | power_in | Power supply pin VDD_4 as listed in the pin definition table. |
| 20 | PA4 | bidirectional | General-purpose I/O PA4 with SPI0_NSS, USART1_CK, DAC_OUT0 and ADC01_IN4; remap SPI2_NSS, I2S2_WS and TLI_VSYNC. |
| 21 | PA5 | bidirectional | General-purpose I/O PA5 with SPI0_SCK, ADC01_IN5 and DAC_OUT1; remap TIMER1_CH0, TIMER1_ETI and TIMER7_CH0_ON. |
| 22 | PA6 | bidirectional | General-purpose I/O PA6 with SPI0_MISO, ADC01_IN6, TIMER2_CH0, TIMER7_BRKIN and TIMER12_CH0; remap TIMER0_BRKIN and TLI_G2. |
| 23 | PA7 | bidirectional | General-purpose I/O PA7 with SPI0_MOSI, ADC01_IN7, TIMER2_CH1, TIMER7_CH0_ON and TIMER13_CH0; remap TIMER0_CH0_ON. |
| 24 | PC4 | bidirectional | General-purpose I/O PC4 with ADC01_IN14 analog input. |
| 25 | PC5 | bidirectional | General-purpose I/O PC5 with ADC01_IN15 analog input. |
| 26 | PB0 | bidirectional | General-purpose I/O PB0 with ADC01_IN8, TIMER2_CH2 and TIMER7_CH1_ON; remap TIMER0_CH1_ON and TLI_R3. |
| 27 | PB1 | bidirectional | General-purpose I/O PB1 with ADC01_IN9, TIMER2_CH3 and TIMER7_CH2_ON; remap TIMER0_CH2_ON and TLI_R6. |
| 28 | PB2 | bidirectional | 5 V tolerant I/O with default functions PB2 and BOOT1. |
| 29 | PB10 | bidirectional | 5 V tolerant I/O PB10 with I2C1_SCL and USART2_TX; remap TIMER1_CH2, TLI_G4, SPI1_SCK and I2S1_CK. |
| 30 | PB11 | bidirectional | 5 V tolerant I/O PB11 with I2C1_SDA and USART2_RX; remap TIMER1_CH3 and TLI_G5. |
| 31 | VSS_1 | power_in | Ground pin VSS_1 as listed in the pin definition table. |
| 32 | VDD_1 | power_in | Power supply pin VDD_1 as listed in the pin definition table. |
| 33 | PB12 | bidirectional | 5 V tolerant I/O PB12 with SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN, I2S1_WS and CAN1_RX. |
| 34 | PB13 | bidirectional | 5 V tolerant I/O PB13 with SPI1_SCK, USART2_CTS, TIMER0_CH0_ON, I2S1_CK and CAN1_TX. |
| 35 | PB14 | bidirectional | 5 V tolerant I/O PB14 with SPI1_MISO, USART2_RTS, TIMER0_CH1_ON and TIMER11_CH0. |
| 36 | PB15 | bidirectional | 5 V tolerant I/O PB15 with SPI1_MOSI, TIMER0_CH2_ON, I2S1_SD and TIMER11_CH1. |
| 37 | PC6 | bidirectional | 5 V tolerant I/O PC6 with I2S1_MCK, TIMER7_CH0, SDIO_D6 and USART5_TX; remap TIMER2_CH0 and TLI_HSYNC. |
| 38 | PC7 | bidirectional | 5 V tolerant I/O PC7 with I2S2_MCK, TIMER7_CH1, SDIO_D7 and USART5_RX; remap TIMER2_CH1 and TLI_G6. |
| 39 | PC8 | bidirectional | 5 V tolerant I/O PC8 with TIMER7_CH2, SDIO_D0 and USART5_CK; remap TIMER2_CH2. |
| 40 | PC9 | bidirectional | 5 V tolerant I/O PC9 with TIMER7_CH3, SDIO_D and CK_OUT1; remap TIMER2_CH3 and I2C2_SDA. |
| 41 | PA8 | bidirectional | 5 V tolerant I/O PA8 with USART0_CK, TIMER0_CH0, CK_OUT0, VCORE and USBFS_SOF; remap TLI_R6 and I2C2_SCL. |
| 42 | PA9 | bidirectional | 5 V tolerant I/O PA9 with USART0_TX, TIMER0_CH1 and USBFS_VBUS; remap I2C2_SMBAI. |
| 43 | PA10 | bidirectional | 5 V tolerant I/O PA10 with USART0_RX, TIMER0_CH2 and USBFS_ID. |
| 44 | PA11 | bidirectional | 5 V tolerant I/O PA11 with USART0_CTS, CAN0_RX, USBFS_DM and TIMER0_CH3; remap TLI_R4. |
| 45 | PA12 | bidirectional | 5 V tolerant I/O PA12 with USART0_RTS, USBFS_DP, CAN0_TX and TIMER0_ETI; remap TLI_R5. |
| 46 | PA13 | bidirectional | 5 V tolerant I/O with default functions JTMS and SWDIO; remap PA13. |
| 47 | VSS_2 | power_in | Ground pin VSS_2 as listed in the pin definition table. |
| 48 | VDD_2 | power_in | Power supply pin VDD_2 as listed in the pin definition table. |
| 49 | PA14 | bidirectional | 5 V tolerant I/O with default functions JTCK and SWCLK; remap PA14. |
| 50 | PA15 | bidirectional | 5 V tolerant I/O with default function JTDI; alternate SPI2_NSS and I2S2_WS; remap TIMER1_CH0, TIMER1_ETI, PA15 and SPI0_NSS. |
| 51 | PC10 | bidirectional | 5 V tolerant I/O PC10 with UART3_TX and SDIO_D2; remap USART2_TX, SPI2_SCK, I2S2_CK and TLI_R2. |
| 52 | PC11 | bidirectional | 5 V tolerant I/O PC11 with UART3_RX and SDIO_D3; remap USART2_RX and SPI2_MISO. |
| 53 | PC12 | bidirectional | 5 V tolerant I/O PC12 with UART4_TX and SDIO_CK; remap USART2_CK, SPI2_MOSI and I2S2_SD. |
| 54 | PD2 | bidirectional | 5 V tolerant I/O PD2 with TIMER2_ETI, UART4_RX and SDIO_CMD. |
| 55 | PB3 | bidirectional | 5 V tolerant I/O with default function JTDO; alternate SPI2_SCK and I2S2_CK; remap PB3, TRACESWO, TIMER1_CH1 and SPI0_SCK. |
| 56 | PB4 | bidirectional | 5 V tolerant I/O with default function NJTRST; alternate SPI2_MISO; remap TIMER2_CH0, PB4 and SPI0_MISO. |
| 57 | PB5 | bidirectional | I/O PB5 with I2C0_SMBA, SPI2_MOSI and I2S2_SD; remap TIMER2_CH1, SPI0_MOSI, CAN1_RX and EXMC_SDCKE1. |
| 58 | PB6 | bidirectional | 5 V tolerant I/O PB6 with I2C0_SCL and TIMER3_CH0; remap USART0_TX, CAN1_TX, EXMC_SDNE1 and SPI0_IO3. |
| 59 | PB7 | bidirectional | 5 V tolerant I/O PB7 with I2C0_SDA, TIMER3_CH1 and EXMC_NL/EXMC_NADV; remap USART0_RX and SPI0_IO4. |
| 60 | BOOT0 | input | Boot mode selection input with default function BOOT0; boot modes are described in datasheet section 3.4. |
| 61 | PB8 | bidirectional | 5 V tolerant I/O PB8 with TIMER3_CH2, TIMER9_CH0 and SDIO_D4; remap I2C0_SCL, CAN0_RX and TLI_B6. |
| 62 | PB9 | bidirectional | 5 V tolerant I/O PB9 with TIMER3_CH3, TIMER10_CH0 and SDIO_D5; remap I2C0_SDA, CAN0_TX, TLI_B7, SPI1_NSS and I2S1_WS. |
| 63 | VSS_3 | power_in | Ground pin VSS_3 as listed in the pin definition table. |
| 64 | VDD_3 | power_in | Power supply pin VDD_3 as listed in the pin definition table. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External voltage range (VDD) | VDD | -0.3 | 3.6 | V | 47 | ||
| External analog supply voltage (VDDA) | VDDA | -0.3 | 3.6 | V | 47 | ||
| External battery supply voltage (VBAT) | VBAT | -0.3 | 3.6 | V | 47 | ||
| Input voltage on 5V tolerant pin | VIN | -0.3 | V | max VDD + 3.6; VIN max cannot exceed 5.5 V | 47 | ||
| Input voltage on other I/O | VIN | -0.3 | 3.6 | V | 47 | ||
| Variations between different VDD power pins | /ΔVDDX/ | 50 | mV | 47 | |||
| Variations between different ground pins | /VSSX −VSS/ | 50 | mV | 47 | |||
| Maximum current for GPIO pins | IIO | -25 | 25 | mA | 47 | ||
| Operating temperature range | TA | -40 | 85 | °C | 47 | ||
| Power dissipation at TA = 85°C of LQFP64 | PD | 647 | mW | TA = 85°C | 47 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 47 | ||
| Maximum junction temperature | TJ | 125 | °C | 47 | |||
| Supply voltage | VDD | 2.6 | 3.3 | 3.6 | V | 47 | |
| Analog supply voltage | VDDA | 2.6 | 3.3 | 3.6 | V | Same as VDD | 47 |
| Battery supply voltage | VBAT | 1.8 | 3.6 | V | 47 | ||
| AHB clock frequency | fHCLK | 120 | MHz | 48 | |||
| APB1 clock frequency | fAPB1 | 60 | MHz | 48 | |||
| APB2 clock frequency | fAPB2 | 120 | MHz | 48 | |||
| Supply current (Standby mode) | IDD+ IDDA | 6.13 | 27.5 | μA | VDD=VDDA=3.3V, LXTAL off, IRC40K off, RTC off | 49 | |
| Power on reset threshold | VPOR | 2.32 | 2.4 | 2.48 | V | 51 | |
| Power down reset threshold | VPDR | 1.72 | 1.8 | 1.88 | V | 51 | |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 5000 | V | TA=25 °C; JS-001-2014 | 52 | ||
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | 500 | V | TA=25 °C; JS-002-2014 | 52 | ||
| Static latch-up I-test | LU I-test | -100 | 100 | mA | TA=25 °C; JESD78 | 52 | |
| Static latch-up Vsupply over voltage | 5.4 | V | 52 | ||||
| Crystal or ceramic frequency (HXTAL) | fHXTAL | 4 | 25 | 32 | MHz | 2.6 V ≤ VDD ≤ 3.6 V | 53 |
| Crystal or ceramic duty cycle (HXTAL) | Ducy(HXTAL) | 30 | 50 | 70 | % | 53 | |
| External clock source or oscillator frequency (HXTAL bypass) | fHXTAL_ext | 1 | 50 | MHz | VDD = 3.3 V | 53 | |
| OSCIN high or low time | tH/L(HXTAL) | 5 | ns | 53 | |||
| OSCIN rise or fall time | tR/F(HXTAL) | 10 | ns | 53 | |||
| External clock source or oscillator frequency (LXTAL bypass) | fLXTAL_ext | 32.768 | 1000 | kHz | VDD = 3.3 V | 54 | |
| OSC32IN high or low time | tH/L(LXTAL) | 450 | ns | 54 | |||
| OSC32IN rise or fall time | tR/F(LXTAL) | 50 | ns | 54 | |||
| Duty cycle (LXTAL bypass) | Ducy(LXTAL) | 30 | 50 | 70 | % | 54 | |
| IRC8M oscillator frequency accuracy, factory-trimmed | ACCIRC8M | -0.9 | 0.4 | % | VDD = VDDA = 3.3 V, TA = -40 °C ~ +85 °C | 55 | |
| IRC8M oscillator frequency accuracy, factory-trimmed | ACCIRC8M | -1 | 1 | % | VDD = VDDA = 3.3 V, TA = 25 °C | 55 | |
| IRC8M oscillator duty cycle | DucyIRC8M | 45 | 50 | 55 | % | VDD = VDDA = 3.3 V | 55 |
| PLL input clock frequency | fPLLIN | 1 | 25 | MHz | 56 | ||
| PLL output clock frequency | fPLLOUT | 16 | 120 | MHz | 56 | ||
| PLL VCO output clock frequency | fVCO | 32 | 240 | MHz | 56 | ||
| PLL lock time | tLOCK | 300 | μs | 56 | |||
| Number of guaranteed program/erase cycles before failure (Endurance) | PECYC | 100 | kcycles | TA=-40°C ~ +85°C | 57 | ||
| Word programming time | tPROG | 37.5 | 170 | us | TA=-40°C ~ +85°C | 57 | |
| Page erase time | tERASE | 50 | 500 | ms | TA=-40°C ~ +85°C | 57 | |
| Mass erase time (512K flash) | tMERASE(512K) | 8 | 64 | s | 57 | ||
| Internal pull-up resistor | RPU | 30 | 40 | 50 | kΩ | All pins VIN = VSS | 59 |
| Internal pull-down resistor | RPD | 30 | 40 | 50 | kΩ | All pins VIN = VDD | 59 |
| ADC clock | fADC | 0.6 | 28 | MHz | 60 | ||
| Sampling rate (12-bit) | fS | 0.04 | 2 | MSPS | 60 | ||
| Sampling time | ts | 0.05 | 8.55 | μs | fADC = 28 MHz | 60 | |
| External input impedance | RAIN | 137.5 | kΩ | See Equation 1 | 60 | ||
| Resistive load | RLOAD | 5 | kΩ | Resistive load with buffer ON | 61 | ||
| Impedance output | Ro | 15 | kΩ | Impedance output with buffer OFF | 61 | ||
| Capacitive load | CLOAD | 50 | pF | Capacitive load with buffer ON | 61 | ||
| Wakeup from off state | Twakeup | 5 | 10 | μs | 61 | ||
| Thermal resistance, junction-to-ambient (LQFP64) | θJA | 61.8 | °C/W | Natural convection, 2S2P PCB | 80 | ||
| Thermal resistance, junction-to-board (LQFP64) | θJB | 42.83 | °C/W | Cold plate, 2S2P PCB | 80 | ||
| Thermal resistance, junction-to-case (LQFP64) | θJC | 21.98 | °C/W | Cold plate, 2S2P PCB | 81 | ||
| Thermal characterization parameter, junction-to-board (LQFP64) | ΨJB | 43.05 | °C/W | Natural convection, 2S2P PCB | 81 | ||
| Thermal characterization parameter, junction-to-top center (LQFP64) | ΨJT | 1.58 | °C/W | Natural convection, 2S2P PCB | 81 |
CAD (KiCad official)
- Symbol:
GD32F205RET6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
gd32f205ret6-etched.step/gd32f205ret6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd32f205ret6.step/gd32f205ret6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (84 pp, sha256
a81243f7cc921dbc, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).