Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GD32F205RET6

GigaDevice Semicon Beijing · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

GD32F205RET6 from GigaDevice Semicon Beijing, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply pin, listed with the default function VBAT only in the pin definition table, with no voltage limit given there.
2 PC13-TAMPER-RTC bidirectional General-purpose I/O PC13 with alternate function TAMPER-RTC.
3 PC14-OSC32IN bidirectional General-purpose I/O PC14 with alternate function OSC32IN.
4 PC15-OSC32OUT bidirectional General-purpose I/O PC15 with alternate function OSC32OUT.
5 OSCIN input Default function OSCIN, remappable to PD0; the clock tree gives the HXTAL range as 4-32 MHz.
6 OSCOUT output Default function OSCOUT, remappable to PD1.
7 NRST bidirectional Reset pin with default function NRST; its electrical characteristics are given in datasheet section 4.11.
8 PC0 bidirectional General-purpose I/O PC0 with ADC012_IN10 analog input; remap EXMC_SDNWE.
9 PC1 bidirectional General-purpose I/O PC1 with ADC012_IN11 analog input.
10 PC2 bidirectional General-purpose I/O PC2 with ADC012_IN12 analog input; remap EXMC_SDNE0 and SPI1_MISO.
11 PC3 bidirectional General-purpose I/O PC3 with ADC012_IN13 analog input; remap EXMC_SDCKE0, SPI1_MOSI and I2S1_SD.
12 VSSA power_in Analog ground pin VSSA as listed in the pin definition table.
13 VDDA power_in Analog supply pin VDDA; the block diagram shows the LVD and SAR ADC powered by VDDA.
14 PA0-WKUP bidirectional General-purpose I/O PA0 with WKUP, ADC012_IN0, USART1_CTS and timer alternate functions; remap UART3_TX.
15 PA1 bidirectional General-purpose I/O PA1 with ADC012_IN1, USART1_RTS and timer alternate functions; remap UART3_RX.
16 PA2 bidirectional General-purpose I/O PA2 with ADC012_IN2, USART1_TX, timer alternate functions and SPI0_IO3.
17 PA3 bidirectional General-purpose I/O PA3 with ADC012_IN3, USART1_RX, timer alternate functions and SPI0_IO4; remap TLI_B5.
18 VSS_4 power_in Ground pin VSS_4 as listed in the pin definition table.
19 VDD_4 power_in Power supply pin VDD_4 as listed in the pin definition table.
20 PA4 bidirectional General-purpose I/O PA4 with SPI0_NSS, USART1_CK, DAC_OUT0 and ADC01_IN4; remap SPI2_NSS, I2S2_WS and TLI_VSYNC.
21 PA5 bidirectional General-purpose I/O PA5 with SPI0_SCK, ADC01_IN5 and DAC_OUT1; remap TIMER1_CH0, TIMER1_ETI and TIMER7_CH0_ON.
22 PA6 bidirectional General-purpose I/O PA6 with SPI0_MISO, ADC01_IN6, TIMER2_CH0, TIMER7_BRKIN and TIMER12_CH0; remap TIMER0_BRKIN and TLI_G2.
23 PA7 bidirectional General-purpose I/O PA7 with SPI0_MOSI, ADC01_IN7, TIMER2_CH1, TIMER7_CH0_ON and TIMER13_CH0; remap TIMER0_CH0_ON.
24 PC4 bidirectional General-purpose I/O PC4 with ADC01_IN14 analog input.
25 PC5 bidirectional General-purpose I/O PC5 with ADC01_IN15 analog input.
26 PB0 bidirectional General-purpose I/O PB0 with ADC01_IN8, TIMER2_CH2 and TIMER7_CH1_ON; remap TIMER0_CH1_ON and TLI_R3.
27 PB1 bidirectional General-purpose I/O PB1 with ADC01_IN9, TIMER2_CH3 and TIMER7_CH2_ON; remap TIMER0_CH2_ON and TLI_R6.
28 PB2 bidirectional 5 V tolerant I/O with default functions PB2 and BOOT1.
29 PB10 bidirectional 5 V tolerant I/O PB10 with I2C1_SCL and USART2_TX; remap TIMER1_CH2, TLI_G4, SPI1_SCK and I2S1_CK.
30 PB11 bidirectional 5 V tolerant I/O PB11 with I2C1_SDA and USART2_RX; remap TIMER1_CH3 and TLI_G5.
31 VSS_1 power_in Ground pin VSS_1 as listed in the pin definition table.
32 VDD_1 power_in Power supply pin VDD_1 as listed in the pin definition table.
33 PB12 bidirectional 5 V tolerant I/O PB12 with SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN, I2S1_WS and CAN1_RX.
34 PB13 bidirectional 5 V tolerant I/O PB13 with SPI1_SCK, USART2_CTS, TIMER0_CH0_ON, I2S1_CK and CAN1_TX.
35 PB14 bidirectional 5 V tolerant I/O PB14 with SPI1_MISO, USART2_RTS, TIMER0_CH1_ON and TIMER11_CH0.
36 PB15 bidirectional 5 V tolerant I/O PB15 with SPI1_MOSI, TIMER0_CH2_ON, I2S1_SD and TIMER11_CH1.
37 PC6 bidirectional 5 V tolerant I/O PC6 with I2S1_MCK, TIMER7_CH0, SDIO_D6 and USART5_TX; remap TIMER2_CH0 and TLI_HSYNC.
38 PC7 bidirectional 5 V tolerant I/O PC7 with I2S2_MCK, TIMER7_CH1, SDIO_D7 and USART5_RX; remap TIMER2_CH1 and TLI_G6.
39 PC8 bidirectional 5 V tolerant I/O PC8 with TIMER7_CH2, SDIO_D0 and USART5_CK; remap TIMER2_CH2.
40 PC9 bidirectional 5 V tolerant I/O PC9 with TIMER7_CH3, SDIO_D and CK_OUT1; remap TIMER2_CH3 and I2C2_SDA.
41 PA8 bidirectional 5 V tolerant I/O PA8 with USART0_CK, TIMER0_CH0, CK_OUT0, VCORE and USBFS_SOF; remap TLI_R6 and I2C2_SCL.
42 PA9 bidirectional 5 V tolerant I/O PA9 with USART0_TX, TIMER0_CH1 and USBFS_VBUS; remap I2C2_SMBAI.
43 PA10 bidirectional 5 V tolerant I/O PA10 with USART0_RX, TIMER0_CH2 and USBFS_ID.
44 PA11 bidirectional 5 V tolerant I/O PA11 with USART0_CTS, CAN0_RX, USBFS_DM and TIMER0_CH3; remap TLI_R4.
45 PA12 bidirectional 5 V tolerant I/O PA12 with USART0_RTS, USBFS_DP, CAN0_TX and TIMER0_ETI; remap TLI_R5.
46 PA13 bidirectional 5 V tolerant I/O with default functions JTMS and SWDIO; remap PA13.
47 VSS_2 power_in Ground pin VSS_2 as listed in the pin definition table.
48 VDD_2 power_in Power supply pin VDD_2 as listed in the pin definition table.
49 PA14 bidirectional 5 V tolerant I/O with default functions JTCK and SWCLK; remap PA14.
50 PA15 bidirectional 5 V tolerant I/O with default function JTDI; alternate SPI2_NSS and I2S2_WS; remap TIMER1_CH0, TIMER1_ETI, PA15 and SPI0_NSS.
51 PC10 bidirectional 5 V tolerant I/O PC10 with UART3_TX and SDIO_D2; remap USART2_TX, SPI2_SCK, I2S2_CK and TLI_R2.
52 PC11 bidirectional 5 V tolerant I/O PC11 with UART3_RX and SDIO_D3; remap USART2_RX and SPI2_MISO.
53 PC12 bidirectional 5 V tolerant I/O PC12 with UART4_TX and SDIO_CK; remap USART2_CK, SPI2_MOSI and I2S2_SD.
54 PD2 bidirectional 5 V tolerant I/O PD2 with TIMER2_ETI, UART4_RX and SDIO_CMD.
55 PB3 bidirectional 5 V tolerant I/O with default function JTDO; alternate SPI2_SCK and I2S2_CK; remap PB3, TRACESWO, TIMER1_CH1 and SPI0_SCK.
56 PB4 bidirectional 5 V tolerant I/O with default function NJTRST; alternate SPI2_MISO; remap TIMER2_CH0, PB4 and SPI0_MISO.
57 PB5 bidirectional I/O PB5 with I2C0_SMBA, SPI2_MOSI and I2S2_SD; remap TIMER2_CH1, SPI0_MOSI, CAN1_RX and EXMC_SDCKE1.
58 PB6 bidirectional 5 V tolerant I/O PB6 with I2C0_SCL and TIMER3_CH0; remap USART0_TX, CAN1_TX, EXMC_SDNE1 and SPI0_IO3.
59 PB7 bidirectional 5 V tolerant I/O PB7 with I2C0_SDA, TIMER3_CH1 and EXMC_NL/EXMC_NADV; remap USART0_RX and SPI0_IO4.
60 BOOT0 input Boot mode selection input with default function BOOT0; boot modes are described in datasheet section 3.4.
61 PB8 bidirectional 5 V tolerant I/O PB8 with TIMER3_CH2, TIMER9_CH0 and SDIO_D4; remap I2C0_SCL, CAN0_RX and TLI_B6.
62 PB9 bidirectional 5 V tolerant I/O PB9 with TIMER3_CH3, TIMER10_CH0 and SDIO_D5; remap I2C0_SDA, CAN0_TX, TLI_B7, SPI1_NSS and I2S1_WS.
63 VSS_3 power_in Ground pin VSS_3 as listed in the pin definition table.
64 VDD_3 power_in Power supply pin VDD_3 as listed in the pin definition table.

Key specifications

Parameter Value
Manufacturer GigaDevice Semicon Beijing
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External voltage range (VDD) VDD -0.3 3.6 V 47
External analog supply voltage (VDDA) VDDA -0.3 3.6 V 47
External battery supply voltage (VBAT) VBAT -0.3 3.6 V 47
Input voltage on 5V tolerant pin VIN -0.3 V max VDD + 3.6; VIN max cannot exceed 5.5 V 47
Input voltage on other I/O VIN -0.3 3.6 V 47
Variations between different VDD power pins /ΔVDDX/ 50 mV 47
Variations between different ground pins /VSSX −VSS/ 50 mV 47
Maximum current for GPIO pins IIO -25 25 mA 47
Operating temperature range TA -40 85 °C 47
Power dissipation at TA = 85°C of LQFP64 PD 647 mW TA = 85°C 47
Storage temperature range TSTG -65 150 °C 47
Maximum junction temperature TJ 125 °C 47
Supply voltage VDD 2.6 3.3 3.6 V 47
Analog supply voltage VDDA 2.6 3.3 3.6 V Same as VDD 47
Battery supply voltage VBAT 1.8 3.6 V 47
AHB clock frequency fHCLK 120 MHz 48
APB1 clock frequency fAPB1 60 MHz 48
APB2 clock frequency fAPB2 120 MHz 48
Supply current (Standby mode) IDD+ IDDA 6.13 27.5 μA VDD=VDDA=3.3V, LXTAL off, IRC40K off, RTC off 49
Power on reset threshold VPOR 2.32 2.4 2.48 V 51
Power down reset threshold VPDR 1.72 1.8 1.88 V 51
Electrostatic discharge voltage (human body model) VESD(HBM) 5000 V TA=25 °C; JS-001-2014 52
Electrostatic discharge voltage (charge device model) VESD(CDM) 500 V TA=25 °C; JS-002-2014 52
Static latch-up I-test LU I-test -100 100 mA TA=25 °C; JESD78 52
Static latch-up Vsupply over voltage 5.4 V 52
Crystal or ceramic frequency (HXTAL) fHXTAL 4 25 32 MHz 2.6 V ≤ VDD ≤ 3.6 V 53
Crystal or ceramic duty cycle (HXTAL) Ducy(HXTAL) 30 50 70 % 53
External clock source or oscillator frequency (HXTAL bypass) fHXTAL_ext 1 50 MHz VDD = 3.3 V 53
OSCIN high or low time tH/L(HXTAL) 5 ns 53
OSCIN rise or fall time tR/F(HXTAL) 10 ns 53
External clock source or oscillator frequency (LXTAL bypass) fLXTAL_ext 32.768 1000 kHz VDD = 3.3 V 54
OSC32IN high or low time tH/L(LXTAL) 450 ns 54
OSC32IN rise or fall time tR/F(LXTAL) 50 ns 54
Duty cycle (LXTAL bypass) Ducy(LXTAL) 30 50 70 % 54
IRC8M oscillator frequency accuracy, factory-trimmed ACCIRC8M -0.9 0.4 % VDD = VDDA = 3.3 V, TA = -40 °C ~ +85 °C 55
IRC8M oscillator frequency accuracy, factory-trimmed ACCIRC8M -1 1 % VDD = VDDA = 3.3 V, TA = 25 °C 55
IRC8M oscillator duty cycle DucyIRC8M 45 50 55 % VDD = VDDA = 3.3 V 55
PLL input clock frequency fPLLIN 1 25 MHz 56
PLL output clock frequency fPLLOUT 16 120 MHz 56
PLL VCO output clock frequency fVCO 32 240 MHz 56
PLL lock time tLOCK 300 μs 56
Number of guaranteed program/erase cycles before failure (Endurance) PECYC 100 kcycles TA=-40°C ~ +85°C 57
Word programming time tPROG 37.5 170 us TA=-40°C ~ +85°C 57
Page erase time tERASE 50 500 ms TA=-40°C ~ +85°C 57
Mass erase time (512K flash) tMERASE(512K) 8 64 s 57
Internal pull-up resistor RPU 30 40 50 kΩ All pins VIN = VSS 59
Internal pull-down resistor RPD 30 40 50 kΩ All pins VIN = VDD 59
ADC clock fADC 0.6 28 MHz 60
Sampling rate (12-bit) fS 0.04 2 MSPS 60
Sampling time ts 0.05 8.55 μs fADC = 28 MHz 60
External input impedance RAIN 137.5 kΩ See Equation 1 60
Resistive load RLOAD 5 kΩ Resistive load with buffer ON 61
Impedance output Ro 15 kΩ Impedance output with buffer OFF 61
Capacitive load CLOAD 50 pF Capacitive load with buffer ON 61
Wakeup from off state Twakeup 5 10 μs 61
Thermal resistance, junction-to-ambient (LQFP64) θJA 61.8 °C/W Natural convection, 2S2P PCB 80
Thermal resistance, junction-to-board (LQFP64) θJB 42.83 °C/W Cold plate, 2S2P PCB 80
Thermal resistance, junction-to-case (LQFP64) θJC 21.98 °C/W Cold plate, 2S2P PCB 81
Thermal characterization parameter, junction-to-board (LQFP64) ΨJB 43.05 °C/W Natural convection, 2S2P PCB 81
Thermal characterization parameter, junction-to-top center (LQFP64) ΨJT 1.58 °C/W Natural convection, 2S2P PCB 81

CAD (KiCad official)

  • Symbol: GD32F205RET6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: gd32f205ret6-etched.step / gd32f205ret6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gd32f205ret6.step / gd32f205ret6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GigaDevice Semicon Beijing datasheet (84 pp, sha256 a81243f7cc921dbc, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF