main
History Download
Ray Initial commit: component/gd32f103ret6 19fea59

GD32F103RET6

GigaDevice Semicon Beijing · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

GD32F103RET6 from GigaDevice Semicon Beijing, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Battery supply (1.8-3.6V) for RTC, oscillator, and backup registers when VDD is absent.
2 PC13-TAMPER-RTC bidirectional GPIO port C bit 13; alternate function TAMPER-RTC for RTC tamper input.
3 PC14-OSC32IN bidirectional GPIO port C bit 14; alternate function OSC32IN for 32.768 kHz oscillator input.
4 PC15-OSC32OUT bidirectional GPIO port C bit 15; alternate function OSC32OUT for 32.768 kHz oscillator output.
5 OSCIN input High-speed (4-16 MHz) crystal oscillator input.
6 OSCOUT output High-speed (4-16 MHz) crystal oscillator output.
7 NRST bidirectional Active-low reset input with 40 kΩ internal pull-up; device enters reset when below 0.3·VDD.
8 PC0 bidirectional GPIO port C bit 0; alternate function ADC012_IN10 for analog input.
9 PC1 bidirectional GPIO port C bit 1; alternate function ADC012_IN11 for analog input.
10 PC2 bidirectional GPIO port C bit 2; alternate function ADC012_IN12 for analog input.
11 PC3 bidirectional GPIO port C bit 3; alternate function ADC012_IN13 for analog input.
12 VSSA power_in Ground for analog circuits; must be connected to VSS.
13 VDDA power_in Analog supply (2.6-3.6V); must connect to VDD with maximum 300 mV difference.
14 PA0-WKUP bidirectional GPIO port A bit 0; wake-up pin and alternate functions USART1_CTS, ADC012_IN0, TIMER1_CH0, TIMER1_ETI, TIMER4_CH0, TIMER7_ETI.
15 PA1 bidirectional GPIO port A bit 1; alternate functions USART1_RTS, ADC012_IN1, TIMER1_CH1, TIMER4_CH1.
16 PA2 bidirectional GPIO port A bit 2; alternate functions USART1_TX, ADC012_IN2, TIMER1_CH2, TIMER4_CH2, TIMER8_CH0.
17 PA3 bidirectional GPIO port A bit 3; alternate functions USART1_RX, ADC012_IN3, TIMER1_CH3, TIMER4_CH3, TIMER8_CH1.
18 VSS_4 power_in Ground for power supply decoupling.
19 VDD_4 power_in Digital power supply (2.6-3.6V) for I/O and internal circuits.
20 PA4 bidirectional GPIO port A bit 4; alternate functions SPI0_NSS, USART1_CK, ADC01_IN4, DAC0_OUT0.
21 PA5 bidirectional GPIO port A bit 5; alternate functions SPI0_SCK, ADC01_IN5, DAC0_OUT1.
22 PA6 bidirectional GPIO port A bit 6; alternate functions SPI0_MISO, ADC01_IN6, TIMER2_CH0, TIMER7_BRKIN, TIMER12_CH0.
23 PA7 bidirectional GPIO port A bit 7; alternate functions SPI0_MOSI, ADC01_IN7, TIMER2_CH1, TIMER7_CH0_ON, TIMER13_CH0.
24 PC4 bidirectional GPIO port C bit 4; alternate function ADC01_IN14 for analog input.
25 PC5 bidirectional GPIO port C bit 5; alternate function ADC01_IN15 for analog input.
26 PB0 bidirectional GPIO port B bit 0; alternate functions ADC01_IN8, TIMER2_CH2, TIMER7_CH1_ON.
27 PB1 bidirectional GPIO port B bit 1; alternate functions ADC01_IN9, TIMER2_CH3, TIMER7_CH2_ON.
28 PB2 bidirectional GPIO port B bit 2 / BOOT1 selector; 5V-tolerant I/O for boot mode selection.
29 PB10 bidirectional GPIO port B bit 10; 5V-tolerant I/O; alternate functions I2C1_SCL, USART2_TX.
30 PB11 bidirectional GPIO port B bit 11; 5V-tolerant I/O; alternate functions I2C1_SDA, USART2_RX.
31 VSS_1 power_in Ground for power supply decoupling.
32 VDD_1 power_in Digital power supply (2.6-3.6V) for I/O and internal circuits.
33 PB12 bidirectional GPIO port B bit 12; 5V-tolerant I/O; alternate functions SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN, I2S1_WS.
34 PB13 bidirectional GPIO port B bit 13; 5V-tolerant I/O; alternate functions SPI1_SCK, USART2_CTS, TIMER0_CH0_ON, I2S1_CK.
35 PB14 bidirectional GPIO port B bit 14; 5V-tolerant I/O; alternate functions SPI1_MISO, USART2_RTS, TIMER0_CH1_ON, TIMER11_CH0.
36 PB15 bidirectional GPIO port B bit 15; 5V-tolerant I/O; alternate functions SPI1_MOSI, TIMER0_CH2_ON, I2S1_SD, TIMER11_CH1.
37 PC6 bidirectional GPIO port C bit 6; 5V-tolerant I/O; alternate functions I2S1_MCK, TIMER7_CH0, SDIO_D6, remap TIMER2_CH0.
38 PC7 bidirectional GPIO port C bit 7; 5V-tolerant I/O; alternate functions I2S2_MCK, TIMER7_CH1, SDIO_D7, remap TIMER2_CH1.
39 PC8 bidirectional GPIO port C bit 8; 5V-tolerant I/O; alternate functions TIMER7_CH2, SDIO_D0, remap TIMER2_CH2.
40 PC9 bidirectional GPIO port C bit 9; 5V-tolerant I/O; alternate functions TIMER7_CH3, SDIO_D1, remap TIMER2_CH3.
41 PA8 bidirectional GPIO port A bit 8; 5V-tolerant I/O; alternate functions USART0_CK, TIMER0_CH0, CK_OUT0.
42 PA9 bidirectional GPIO port A bit 9; 5V-tolerant I/O; alternate functions USART0_TX, TIMER0_CH1.
43 PA10 bidirectional GPIO port A bit 10; 5V-tolerant I/O; alternate functions USART0_RX, TIMER0_CH2.
44 PA11 bidirectional GPIO port A bit 11; 5V-tolerant I/O; alternate functions USART0_CTS, CAN0_RX, USBDM, TIMER0_CH3.
45 PA12 bidirectional GPIO port A bit 12; 5V-tolerant I/O; alternate functions USART0_RTS, CAN0_TX, TIMER0_ETI, USBDP.
46 PA13 bidirectional GPIO port A bit 13; 5V-tolerant I/O; default JTMS/SWDIO for JTAG/SWD debug interface.
47 VSS_2 power_in Ground for power supply decoupling.
48 VDD_2 power_in Digital power supply (2.6-3.6V) for I/O and internal circuits.
49 PA14 bidirectional GPIO port A bit 14; 5V-tolerant I/O; default JTCK/SWCLK for JTAG/SWD debug interface.
50 PA15 bidirectional GPIO port A bit 15; 5V-tolerant I/O; alternate functions SPI2_NSS, I2S2_WS, TIMER1_CH0, SPI0_NSS.
51 PC10 bidirectional GPIO port C bit 10; 5V-tolerant I/O; alternate functions UART3_TX, SDIO_D2, SPI2_SCK, I2S2_CK.
52 PC11 bidirectional GPIO port C bit 11; 5V-tolerant I/O; alternate functions UART3_RX, SDIO_D3, SPI2_MISO.
53 PC12 bidirectional GPIO port C bit 12; 5V-tolerant I/O; alternate functions UART4_TX, SDIO_CK, SPI2_MOSI, I2S2_SD.
54 PD2 bidirectional GPIO port D bit 2; 5V-tolerant I/O; alternate functions TIMER2_ETI, SDIO_CMD, UART4_RX.
55 PB3 bidirectional GPIO port B bit 3; 5V-tolerant I/O; default JTDO; alternate functions SPI2_SCK, I2S2_CK, TIMER1_CH1, SPI0_SCK, TRACESWO.
56 PB4 bidirectional GPIO port B bit 4; 5V-tolerant I/O; default NJTRST; alternate functions SPI2_MISO, TIMER2_CH0, SPI0_MISO.
57 PB5 bidirectional GPIO port B bit 5; alternate functions I2C0_SMBA, SPI2_MOSI, I2S2_SD, TIMER2_CH1, SPI0_MOSI.
58 PB6 bidirectional GPIO port B bit 6; 5V-tolerant I/O; alternate functions I2C0_SCL, TIMER3_CH0, remap USART0_TX.
59 PB7 bidirectional GPIO port B bit 7; 5V-tolerant I/O; alternate functions I2C0_SDA, TIMER3_CH1, remap USART0_RX.
60 BOOT0 input Boot mode selection input; low selects main flash (default), high selects system memory or RAM.
61 PB8 bidirectional GPIO port B bit 8; 5V-tolerant I/O; alternate functions TIMER3_CH2, SDIO_D4, TIMER9_CH0, I2C0_SCL, CAN0_RX.
62 PB9 bidirectional GPIO port B bit 9; 5V-tolerant I/O; alternate functions TIMER3_CH3, SDIO_D5, TIMER10_CH0, I2C0_SDA, CAN0_TX.
63 VSS_3 power_in Ground for power supply decoupling.
64 VDD_3 power_in Digital power supply (2.6-3.6V) for I/O and internal circuits.

Key specifications

Parameter Value
Manufacturer GigaDevice Semicon Beijing
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: GD32F103RET6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: gd32f103ret6-etched.step / gd32f103ret6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gd32f103ret6.step / gd32f103ret6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GigaDevice Semicon Beijing datasheet (112 pp, sha256 53da1a17a1523e83, retrieved 2026-09-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF