← Commit history

Initial commit: component/gd32f103ret6

Ray ·19fea59d6e ·
2 files changed +579
README.mdadded+100
@@ -0,0 +1,100 @@+# GD32F103RET6++**GigaDevice Semicon Beijing** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++GD32F103RET6 from GigaDevice Semicon Beijing, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery supply (1.8-3.6V) for RTC, oscillator, and backup registers when VDD is absent. |+| 2 | PC13-TAMPER-RTC | bidirectional | GPIO port C bit 13; alternate function TAMPER-RTC for RTC tamper input. |+| 3 | PC14-OSC32IN | bidirectional | GPIO port C bit 14; alternate function OSC32IN for 32.768 kHz oscillator input. |+| 4 | PC15-OSC32OUT | bidirectional | GPIO port C bit 15; alternate function OSC32OUT for 32.768 kHz oscillator output. |+| 5 | OSCIN | input | High-speed (4-16 MHz) crystal oscillator input. |+| 6 | OSCOUT | output | High-speed (4-16 MHz) crystal oscillator output. |+| 7 | NRST | bidirectional | Active-low reset input with 40 kΩ internal pull-up; device enters reset when below 0.3·VDD. |+| 8 | PC0 | bidirectional | GPIO port C bit 0; alternate function ADC012_IN10 for analog input. |+| 9 | PC1 | bidirectional | GPIO port C bit 1; alternate function ADC012_IN11 for analog input. |+| 10 | PC2 | bidirectional | GPIO port C bit 2; alternate function ADC012_IN12 for analog input. |+| 11 | PC3 | bidirectional | GPIO port C bit 3; alternate function ADC012_IN13 for analog input. |+| 12 | VSSA | power_in | Ground for analog circuits; must be connected to VSS. |+| 13 | VDDA | power_in | Analog supply (2.6-3.6V); must connect to VDD with maximum 300 mV difference. |+| 14 | PA0-WKUP | bidirectional | GPIO port A bit 0; wake-up pin and alternate functions USART1_CTS, ADC012_IN0, TIMER1_CH0, TIMER1_ETI, TIMER4_CH0, TIMER7_ETI. |+| 15 | PA1 | bidirectional | GPIO port A bit 1; alternate functions USART1_RTS, ADC012_IN1, TIMER1_CH1, TIMER4_CH1. |+| 16 | PA2 | bidirectional | GPIO port A bit 2; alternate functions USART1_TX, ADC012_IN2, TIMER1_CH2, TIMER4_CH2, TIMER8_CH0. |+| 17 | PA3 | bidirectional | GPIO port A bit 3; alternate functions USART1_RX, ADC012_IN3, TIMER1_CH3, TIMER4_CH3, TIMER8_CH1. |+| 18 | VSS_4 | power_in | Ground for power supply decoupling. |+| 19 | VDD_4 | power_in | Digital power supply (2.6-3.6V) for I/O and internal circuits. |+| 20 | PA4 | bidirectional | GPIO port A bit 4; alternate functions SPI0_NSS, USART1_CK, ADC01_IN4, DAC0_OUT0. |+| 21 | PA5 | bidirectional | GPIO port A bit 5; alternate functions SPI0_SCK, ADC01_IN5, DAC0_OUT1. |+| 22 | PA6 | bidirectional | GPIO port A bit 6; alternate functions SPI0_MISO, ADC01_IN6, TIMER2_CH0, TIMER7_BRKIN, TIMER12_CH0. |+| 23 | PA7 | bidirectional | GPIO port A bit 7; alternate functions SPI0_MOSI, ADC01_IN7, TIMER2_CH1, TIMER7_CH0_ON, TIMER13_CH0. |+| 24 | PC4 | bidirectional | GPIO port C bit 4; alternate function ADC01_IN14 for analog input. |+| 25 | PC5 | bidirectional | GPIO port C bit 5; alternate function ADC01_IN15 for analog input. |+| 26 | PB0 | bidirectional | GPIO port B bit 0; alternate functions ADC01_IN8, TIMER2_CH2, TIMER7_CH1_ON. |+| 27 | PB1 | bidirectional | GPIO port B bit 1; alternate functions ADC01_IN9, TIMER2_CH3, TIMER7_CH2_ON. |+| 28 | PB2 | bidirectional | GPIO port B bit 2 / BOOT1 selector; 5V-tolerant I/O for boot mode selection. |+| 29 | PB10 | bidirectional | GPIO port B bit 10; 5V-tolerant I/O; alternate functions I2C1_SCL, USART2_TX. |+| 30 | PB11 | bidirectional | GPIO port B bit 11; 5V-tolerant I/O; alternate functions I2C1_SDA, USART2_RX. |+| 31 | VSS_1 | power_in | Ground for power supply decoupling. |+| 32 | VDD_1 | power_in | Digital power supply (2.6-3.6V) for I/O and internal circuits. |+| 33 | PB12 | bidirectional | GPIO port B bit 12; 5V-tolerant I/O; alternate functions SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN, I2S1_WS. |+| 34 | PB13 | bidirectional | GPIO port B bit 13; 5V-tolerant I/O; alternate functions SPI1_SCK, USART2_CTS, TIMER0_CH0_ON, I2S1_CK. |+| 35 | PB14 | bidirectional | GPIO port B bit 14; 5V-tolerant I/O; alternate functions SPI1_MISO, USART2_RTS, TIMER0_CH1_ON, TIMER11_CH0. |+| 36 | PB15 | bidirectional | GPIO port B bit 15; 5V-tolerant I/O; alternate functions SPI1_MOSI, TIMER0_CH2_ON, I2S1_SD, TIMER11_CH1. |+| 37 | PC6 | bidirectional | GPIO port C bit 6; 5V-tolerant I/O; alternate functions I2S1_MCK, TIMER7_CH0, SDIO_D6, remap TIMER2_CH0. |+| 38 | PC7 | bidirectional | GPIO port C bit 7; 5V-tolerant I/O; alternate functions I2S2_MCK, TIMER7_CH1, SDIO_D7, remap TIMER2_CH1. |+| 39 | PC8 | bidirectional | GPIO port C bit 8; 5V-tolerant I/O; alternate functions TIMER7_CH2, SDIO_D0, remap TIMER2_CH2. |+| 40 | PC9 | bidirectional | GPIO port C bit 9; 5V-tolerant I/O; alternate functions TIMER7_CH3, SDIO_D1, remap TIMER2_CH3. |+| 41 | PA8 | bidirectional | GPIO port A bit 8; 5V-tolerant I/O; alternate functions USART0_CK, TIMER0_CH0, CK_OUT0. |+| 42 | PA9 | bidirectional | GPIO port A bit 9; 5V-tolerant I/O; alternate functions USART0_TX, TIMER0_CH1. |+| 43 | PA10 | bidirectional | GPIO port A bit 10; 5V-tolerant I/O; alternate functions USART0_RX, TIMER0_CH2. |+| 44 | PA11 | bidirectional | GPIO port A bit 11; 5V-tolerant I/O; alternate functions USART0_CTS, CAN0_RX, USBDM, TIMER0_CH3. |+| 45 | PA12 | bidirectional | GPIO port A bit 12; 5V-tolerant I/O; alternate functions USART0_RTS, CAN0_TX, TIMER0_ETI, USBDP. |+| 46 | PA13 | bidirectional | GPIO port A bit 13; 5V-tolerant I/O; default JTMS/SWDIO for JTAG/SWD debug interface. |+| 47 | VSS_2 | power_in | Ground for power supply decoupling. |+| 48 | VDD_2 | power_in | Digital power supply (2.6-3.6V) for I/O and internal circuits. |+| 49 | PA14 | bidirectional | GPIO port A bit 14; 5V-tolerant I/O; default JTCK/SWCLK for JTAG/SWD debug interface. |+| 50 | PA15 | bidirectional | GPIO port A bit 15; 5V-tolerant I/O; alternate functions SPI2_NSS, I2S2_WS, TIMER1_CH0, SPI0_NSS. |+| 51 | PC10 | bidirectional | GPIO port C bit 10; 5V-tolerant I/O; alternate functions UART3_TX, SDIO_D2, SPI2_SCK, I2S2_CK. |+| 52 | PC11 | bidirectional | GPIO port C bit 11; 5V-tolerant I/O; alternate functions UART3_RX, SDIO_D3, SPI2_MISO. |+| 53 | PC12 | bidirectional | GPIO port C bit 12; 5V-tolerant I/O; alternate functions UART4_TX, SDIO_CK, SPI2_MOSI, I2S2_SD. |+| 54 | PD2 | bidirectional | GPIO port D bit 2; 5V-tolerant I/O; alternate functions TIMER2_ETI, SDIO_CMD, UART4_RX. |+| 55 | PB3 | bidirectional | GPIO port B bit 3; 5V-tolerant I/O; default JTDO; alternate functions SPI2_SCK, I2S2_CK, TIMER1_CH1, SPI0_SCK, TRACESWO. |+| 56 | PB4 | bidirectional | GPIO port B bit 4; 5V-tolerant I/O; default NJTRST; alternate functions SPI2_MISO, TIMER2_CH0, SPI0_MISO. |+| 57 | PB5 | bidirectional | GPIO port B bit 5; alternate functions I2C0_SMBA, SPI2_MOSI, I2S2_SD, TIMER2_CH1, SPI0_MOSI. |+| 58 | PB6 | bidirectional | GPIO port B bit 6; 5V-tolerant I/O; alternate functions I2C0_SCL, TIMER3_CH0, remap USART0_TX. |+| 59 | PB7 | bidirectional | GPIO port B bit 7; 5V-tolerant I/O; alternate functions I2C0_SDA, TIMER3_CH1, remap USART0_RX. |+| 60 | BOOT0 | input | Boot mode selection input; low selects main flash (default), high selects system memory or RAM. |+| 61 | PB8 | bidirectional | GPIO port B bit 8; 5V-tolerant I/O; alternate functions TIMER3_CH2, SDIO_D4, TIMER9_CH0, I2C0_SCL, CAN0_RX. |+| 62 | PB9 | bidirectional | GPIO port B bit 9; 5V-tolerant I/O; alternate functions TIMER3_CH3, SDIO_D5, TIMER10_CH0, I2C0_SDA, CAN0_TX. |+| 63 | VSS_3 | power_in | Ground for power supply decoupling. |+| 64 | VDD_3 | power_in | Digital power supply (2.6-3.6V) for I/O and internal circuits. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `GD32F103RET6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `gd32f103ret6-etched.step` / `gd32f103ret6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gd32f103ret6.step` / `gd32f103ret6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604748899240189952) (112 pp, sha256 `53da1a17a1523e83`, retrieved 2026-09-17, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/gd32f103ret6-datasheet.pdf)
page.jsonadded+479
@@ -0,0 +1,479 @@+{+  "slug": "gd32f103ret6",+  "version": "0.1.0",+  "type": "component",+  "description": "GigaDevice Semicon Beijing Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "gd32f103ret6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "gd32f103ret6.kicad_sym",+    "gd32f103ret6.kicad_mod",+    "gd32f103ret6.glb",+    "gd32f103ret6.step",+    "gd32f103ret6.lbr",+    "docs/hero.png",+    "docs/gd32f103ret6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "GD32F103RET6",+    "manufacturer": "GigaDevice Semicon Beijing",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604748899240189952",+    "parts": {+      "symbol": "gd32f103ret6.kicad_sym",+      "footprint": "gd32f103ret6.kicad_mod",+      "model_3d": "gd32f103ret6-etched.glb",+      "model_3d_plain": "gd32f103ret6.glb",+      "model_3d_step": "gd32f103ret6-etched.step",+      "model_3d_step_plain": "gd32f103ret6.step",+      "lbr": "gd32f103ret6.lbr"+    },+    "distributor_links": {+      "lcsc": "C77940"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery supply (1.8-3.6V) for RTC, oscillator, and backup registers when VDD is absent."+      },+      {+        "number": "2",+        "name": "PC13-TAMPER-RTC",+        "type": "bidirectional",+        "description": "GPIO port C bit 13; alternate function TAMPER-RTC for RTC tamper input."+      },+      {+        "number": "3",+        "name": "PC14-OSC32IN",+        "type": "bidirectional",+        "description": "GPIO port C bit 14; alternate function OSC32IN for 32.768 kHz oscillator input."+      },+      {+        "number": "4",+        "name": "PC15-OSC32OUT",+        "type": "bidirectional",+        "description": "GPIO port C bit 15; alternate function OSC32OUT for 32.768 kHz oscillator output."+      },+      {+        "number": "5",+        "name": "OSCIN",+        "type": "input",+        "description": "High-speed (4-16 MHz) crystal oscillator input."+      },+      {+        "number": "6",+        "name": "OSCOUT",+        "type": "output",+        "description": "High-speed (4-16 MHz) crystal oscillator output."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low reset input with 40 kΩ internal pull-up; device enters reset when below 0.3·VDD."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO port C bit 0; alternate function ADC012_IN10 for analog input."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO port C bit 1; alternate function ADC012_IN11 for analog input."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO port C bit 2; alternate function ADC012_IN12 for analog input."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO port C bit 3; alternate function ADC012_IN13 for analog input."+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Ground for analog circuits; must be connected to VSS."+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply (2.6-3.6V); must connect to VDD with maximum 300 mV difference."+      },+      {+        "number": "14",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "GPIO port A bit 0; wake-up pin and alternate functions USART1_CTS, ADC012_IN0, TIMER1_CH0, TIMER1_ETI, TIMER4_CH0, TIMER7_ETI."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO port A bit 1; alternate functions USART1_RTS, ADC012_IN1, TIMER1_CH1, TIMER4_CH1."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO port A bit 2; alternate functions USART1_TX, ADC012_IN2, TIMER1_CH2, TIMER4_CH2, TIMER8_CH0."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO port A bit 3; alternate functions USART1_RX, ADC012_IN3, TIMER1_CH3, TIMER4_CH3, TIMER8_CH1."+      },+      {+        "number": "18",+        "name": "VSS_4",+        "type": "power_in",+        "description": "Ground for power supply decoupling."+      },+      {+        "number": "19",+        "name": "VDD_4",+        "type": "power_in",+        "description": "Digital power supply (2.6-3.6V) for I/O and internal circuits."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO port A bit 4; alternate functions SPI0_NSS, USART1_CK, ADC01_IN4, DAC0_OUT0."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO port A bit 5; alternate functions SPI0_SCK, ADC01_IN5, DAC0_OUT1."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO port A bit 6; alternate functions SPI0_MISO, ADC01_IN6, TIMER2_CH0, TIMER7_BRKIN, TIMER12_CH0."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO port A bit 7; alternate functions SPI0_MOSI, ADC01_IN7, TIMER2_CH1, TIMER7_CH0_ON, TIMER13_CH0."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO port C bit 4; alternate function ADC01_IN14 for analog input."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO port C bit 5; alternate function ADC01_IN15 for analog input."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO port B bit 0; alternate functions ADC01_IN8, TIMER2_CH2, TIMER7_CH1_ON."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO port B bit 1; alternate functions ADC01_IN9, TIMER2_CH3, TIMER7_CH2_ON."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "GPIO port B bit 2 / BOOT1 selector; 5V-tolerant I/O for boot mode selection."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO port B bit 10; 5V-tolerant I/O; alternate functions I2C1_SCL, USART2_TX."+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "GPIO port B bit 11; 5V-tolerant I/O; alternate functions I2C1_SDA, USART2_RX."+      },+      {+        "number": "31",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Ground for power supply decoupling."+      },+      {+        "number": "32",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Digital power supply (2.6-3.6V) for I/O and internal circuits."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO port B bit 12; 5V-tolerant I/O; alternate functions SPI1_NSS, I2C1_SMBA, USART2_CK, TIMER0_BRKIN, I2S1_WS."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO port B bit 13; 5V-tolerant I/O; alternate functions SPI1_SCK, USART2_CTS, TIMER0_CH0_ON, I2S1_CK."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO port B bit 14; 5V-tolerant I/O; alternate functions SPI1_MISO, USART2_RTS, TIMER0_CH1_ON, TIMER11_CH0."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO port B bit 15; 5V-tolerant I/O; alternate functions SPI1_MOSI, TIMER0_CH2_ON, I2S1_SD, TIMER11_CH1."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "GPIO port C bit 6; 5V-tolerant I/O; alternate functions I2S1_MCK, TIMER7_CH0, SDIO_D6, remap TIMER2_CH0."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "GPIO port C bit 7; 5V-tolerant I/O; alternate functions I2S2_MCK, TIMER7_CH1, SDIO_D7, remap TIMER2_CH1."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "GPIO port C bit 8; 5V-tolerant I/O; alternate functions TIMER7_CH2, SDIO_D0, remap TIMER2_CH2."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "GPIO port C bit 9; 5V-tolerant I/O; alternate functions TIMER7_CH3, SDIO_D1, remap TIMER2_CH3."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO port A bit 8; 5V-tolerant I/O; alternate functions USART0_CK, TIMER0_CH0, CK_OUT0."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO port A bit 9; 5V-tolerant I/O; alternate functions USART0_TX, TIMER0_CH1."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO port A bit 10; 5V-tolerant I/O; alternate functions USART0_RX, TIMER0_CH2."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO port A bit 11; 5V-tolerant I/O; alternate functions USART0_CTS, CAN0_RX, USBDM, TIMER0_CH3."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO port A bit 12; 5V-tolerant I/O; alternate functions USART0_RTS, CAN0_TX, TIMER0_ETI, USBDP."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "GPIO port A bit 13; 5V-tolerant I/O; default JTMS/SWDIO for JTAG/SWD debug interface."+      },+      {+        "number": "47",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Ground for power supply decoupling."+      },+      {+        "number": "48",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Digital power supply (2.6-3.6V) for I/O and internal circuits."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "GPIO port A bit 14; 5V-tolerant I/O; default JTCK/SWCLK for JTAG/SWD debug interface."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "GPIO port A bit 15; 5V-tolerant I/O; alternate functions SPI2_NSS, I2S2_WS, TIMER1_CH0, SPI0_NSS."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "GPIO port C bit 10; 5V-tolerant I/O; alternate functions UART3_TX, SDIO_D2, SPI2_SCK, I2S2_CK."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "GPIO port C bit 11; 5V-tolerant I/O; alternate functions UART3_RX, SDIO_D3, SPI2_MISO."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "GPIO port C bit 12; 5V-tolerant I/O; alternate functions UART4_TX, SDIO_CK, SPI2_MOSI, I2S2_SD."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "GPIO port D bit 2; 5V-tolerant I/O; alternate functions TIMER2_ETI, SDIO_CMD, UART4_RX."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "GPIO port B bit 3; 5V-tolerant I/O; default JTDO; alternate functions SPI2_SCK, I2S2_CK, TIMER1_CH1, SPI0_SCK, TRACESWO."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "GPIO port B bit 4; 5V-tolerant I/O; default NJTRST; alternate functions SPI2_MISO, TIMER2_CH0, SPI0_MISO."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO port B bit 5; alternate functions I2C0_SMBA, SPI2_MOSI, I2S2_SD, TIMER2_CH1, SPI0_MOSI."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO port B bit 6; 5V-tolerant I/O; alternate functions I2C0_SCL, TIMER3_CH0, remap USART0_TX."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO port B bit 7; 5V-tolerant I/O; alternate functions I2C0_SDA, TIMER3_CH1, remap USART0_RX."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot mode selection input; low selects main flash (default), high selects system memory or RAM."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO port B bit 8; 5V-tolerant I/O; alternate functions TIMER3_CH2, SDIO_D4, TIMER9_CH0, I2C0_SCL, CAN0_RX."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO port B bit 9; 5V-tolerant I/O; alternate functions TIMER3_CH3, SDIO_D5, TIMER10_CH0, I2C0_SDA, CAN0_TX."+      },+      {+        "number": "63",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Ground for power supply decoupling."+      },+      {+        "number": "64",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Digital power supply (2.6-3.6V) for I/O and internal circuits."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "12/64 pins cited to the wrong page (name found elsewhere): ['53:PC12@p40', '54:PD2@p40', '55:PB3@p40', '56:PB4@p40']"+        ],+        "pages_sent": 112,+        "cost_usd": 1.0912,+        "at": "2026-09-17T22:44:53"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604748899240189952",+        "pages": 112,+        "sha256": "53da1a17a1523e83",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file