main
Ray
gd25q128ewigr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
b05bd5e
GD25Q128EWIGR
GigaDevice Semicon Beijing · NOR FLASH · WSON-8-EP(5x6)
GD25Q128EWIGR from GigaDevice Semicon Beijing, in a WSON-8-EP(5x6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input, active low. Must be driven high when the chip is not selected; do not leave floating after power-on. |
| 2 | SO/IO1 | bidirectional | Serial Data Output in Standard SPI mode; becomes bidirectional Data I/O 1 in Dual/Quad SPI modes. |
| 3 | WP#/IO2 | bidirectional | Write Protect input (active low) in Standard/Dual SPI modes; becomes bidirectional Data I/O 2 in Quad SPI mode when Status Register QE bit = 1. |
| 4 | VSS | power_in | Ground reference for all signals and supply return. |
| 5 | SI/IO0 | bidirectional | Serial Data Input in Standard SPI mode; becomes bidirectional Data I/O 0 in Dual/Quad SPI modes. |
| 6 | SCLK | input | Serial Clock input. Data on SI/IOx is latched on rising edge; SO/IOx shifts on falling edge. SPI modes 0 and 3 supported, up to 133MHz. |
| 7 | HOLD#/RESET#/IO3 | bidirectional | Multifunction pin: HOLD# (pauses serial communication) or RESET# input in Standard/Dual SPI modes; becomes bidirectional Data I/O 3 in Quad SPI mode. HOLD vs RESET behavior selected by non-volatile HOLD/RST status bit; IO3 role selected when QE=1. |
| 8 | VCC | power_in | Power supply input, 2.7V to 3.6V single supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | WSON-8-EP(5x6) |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
GD25Q128EWIGRGD25Q128EWIGRWHIGGD25Q128EWIGRUFIGGD25Q128EWIGRSIGGD25Q128EWIGRIRGD25Q128EWIGRPIG
CAD (KiCad official)
- Symbol:
GD25Q128EWIGR - Footprint:
Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(5x6) (KiCad packages3D, STEP)
- 3D model files:
gd25q128ewigr-etched.step/gd25q128ewigr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd25q128ewigr.step/gd25q128ewigr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (63 pp, sha256
54cb85133a09da0c, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GD25Q128EWIGR
**GigaDevice Semicon Beijing** · NOR FLASH · WSON-8-EP(5x6)
GD25Q128EWIGR from GigaDevice Semicon Beijing, in a WSON-8-EP(5x6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input, active low. Must be driven high when the chip is not selected; do not leave floating after power-on. |
| 2 | SO/IO1 | bidirectional | Serial Data Output in Standard SPI mode; becomes bidirectional Data I/O 1 in Dual/Quad SPI modes. |
| 3 | WP#/IO2 | bidirectional | Write Protect input (active low) in Standard/Dual SPI modes; becomes bidirectional Data I/O 2 in Quad SPI mode when Status Register QE bit = 1. |
| 4 | VSS | power_in | Ground reference for all signals and supply return. |
| 5 | SI/IO0 | bidirectional | Serial Data Input in Standard SPI mode; becomes bidirectional Data I/O 0 in Dual/Quad SPI modes. |
| 6 | SCLK | input | Serial Clock input. Data on SI/IOx is latched on rising edge; SO/IOx shifts on falling edge. SPI modes 0 and 3 supported, up to 133MHz. |
| 7 | HOLD#/RESET#/IO3 | bidirectional | Multifunction pin: HOLD# (pauses serial communication) or RESET# input in Standard/Dual SPI modes; becomes bidirectional Data I/O 3 in Quad SPI mode. HOLD vs RESET behavior selected by non-volatile HOLD/RST status bit; IO3 role selected when QE=1. |
| 8 | VCC | power_in | Power supply input, 2.7V to 3.6V single supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | WSON-8-EP(5x6) |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `GD25Q128EWIGR`
- `GD25Q128EWIGRWHIG`
- `GD25Q128EWIGRUFIG`
- `GD25Q128EWIGRSIG`
- `GD25Q128EWIGRIR`
- `GD25Q128EWIGRPIG`
## CAD (KiCad official)
- Symbol: `GD25Q128EWIGR`
- Footprint: `Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm`
- 3D model: WSON-8-EP(5x6) (KiCad packages3D, STEP)
- 3D model files: `gd25q128ewigr-etched.step` / `gd25q128ewigr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gd25q128ewigr.step` / `gd25q128ewigr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/gd25q128ewigr-datasheet.pdf) (63 pp, sha256 `54cb85133a09da0c`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gd25q128ewigr-datasheet.pdf)