main
Ray
gd25lq32eeigr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
d8579b2
GD25LQ32EEIGR
GigaDevice Semicon Beijing · NAND FLASH · USON-8-EP(2x3)
GD25LQ32EEIGR from GigaDevice Semicon Beijing, in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Active-low chip select input. Must be driven high when the device is not selected (do not leave floating after power-on). Falling edge starts an SPI transaction; rising edge terminates it and returns the device to standby. |
| 2 | SO/IO1 | bidirectional | Standard SPI serial data output (SO). Becomes bidirectional data line IO1 in Dual SPI, Quad SPI, and QPI modes. Data shifts out on the falling edge of SCLK. |
| 3 | WP#/IO2 | bidirectional | Active-low hardware write protect input when QE=0: gates the SRP/BP status-register bits so the protected memory region cannot be modified. When QE=1 (Quad SPI or QPI), this pin is repurposed as bidirectional data line IO2. |
| 4 | VSS | power_in | Device ground reference (0 V). |
| 5 | SI/IO0 | bidirectional | Standard SPI serial data input (SI). Becomes bidirectional data line IO0 in Dual SPI, Quad SPI, and QPI modes. Data is latched on the rising edge of SCLK. |
| 6 | SCLK | input | Serial clock input. Supports SPI mode 0 and mode 3. Up to 133 MHz for fast-read operations with 30 pF load. |
| 7 | HOLD#/IO3 | bidirectional | Active-low HOLD input when QE=0: pauses serial communication without deselecting the device (SO becomes high-impedance while SI/SCLK are don't-care). When QE=1 (Quad SPI or QPI), this pin is repurposed as bidirectional data line IO3. |
| 8 | VCC | power_in | Single-supply power input, 1.65 V to 2.0 V. Bypass locally with 100 nF to VSS. Write Inhibit Voltage (VWI) causes automatic reset if VCC drops below threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | USON-8-EP(2x3) |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
GD25LQ32EEIGRGD25LQ32EEIGREFGGD25LQ32EEIGRSIGGD25LQ32EEIGRSFGGD25LQ32EEIGRNIGGD25LQ32EEIGRNFGGD25LQ32EEIGRQIGGD25LQ32EEIGRQFGGD25LQ32EEIGRWIGGD25LQ32EEIGRWFG
CAD (KiCad official)
- Symbol:
GD25LQ32EEIGR - Footprint:
Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm - 3D model: USON-8-EP(2x3) (KiCad packages3D, STEP)
- 3D model files:
gd25lq32eeigr-etched.step/gd25lq32eeigr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd25lq32eeigr.step/gd25lq32eeigr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (58 pp, sha256
eb5e3a1ad059cbf6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# GD25LQ32EEIGR
**GigaDevice Semicon Beijing** · NAND FLASH · USON-8-EP(2x3)
GD25LQ32EEIGR from GigaDevice Semicon Beijing, in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Active-low chip select input. Must be driven high when the device is not selected (do not leave floating after power-on). Falling edge starts an SPI transaction; rising edge terminates it and returns the device to standby. |
| 2 | SO/IO1 | bidirectional | Standard SPI serial data output (SO). Becomes bidirectional data line IO1 in Dual SPI, Quad SPI, and QPI modes. Data shifts out on the falling edge of SCLK. |
| 3 | WP#/IO2 | bidirectional | Active-low hardware write protect input when QE=0: gates the SRP/BP status-register bits so the protected memory region cannot be modified. When QE=1 (Quad SPI or QPI), this pin is repurposed as bidirectional data line IO2. |
| 4 | VSS | power_in | Device ground reference (0 V). |
| 5 | SI/IO0 | bidirectional | Standard SPI serial data input (SI). Becomes bidirectional data line IO0 in Dual SPI, Quad SPI, and QPI modes. Data is latched on the rising edge of SCLK. |
| 6 | SCLK | input | Serial clock input. Supports SPI mode 0 and mode 3. Up to 133 MHz for fast-read operations with 30 pF load. |
| 7 | HOLD#/IO3 | bidirectional | Active-low HOLD input when QE=0: pauses serial communication without deselecting the device (SO becomes high-impedance while SI/SCLK are don't-care). When QE=1 (Quad SPI or QPI), this pin is repurposed as bidirectional data line IO3. |
| 8 | VCC | power_in | Single-supply power input, 1.65 V to 2.0 V. Bypass locally with 100 nF to VSS. Write Inhibit Voltage (VWI) causes automatic reset if VCC drops below threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | USON-8-EP(2x3) |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `GD25LQ32EEIGR`
- `GD25LQ32EEIGREFG`
- `GD25LQ32EEIGRSIG`
- `GD25LQ32EEIGRSFG`
- `GD25LQ32EEIGRNIG`
- `GD25LQ32EEIGRNFG`
- `GD25LQ32EEIGRQIG`
- `GD25LQ32EEIGRQFG`
- `GD25LQ32EEIGRWIG`
- `GD25LQ32EEIGRWFG`
## CAD (KiCad official)
- Symbol: `GD25LQ32EEIGR`
- Footprint: `Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm`
- 3D model: USON-8-EP(2x3) (KiCad packages3D, STEP)
- 3D model files: `gd25lq32eeigr-etched.step` / `gd25lq32eeigr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `gd25lq32eeigr.step` / `gd25lq32eeigr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GigaDevice Semicon Beijing datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589836731819057152) (58 pp, sha256 `eb5e3a1ad059cbf6`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/gd25lq32eeigr-datasheet.pdf)