main
Ray Publish 0.1.0 4828bcd
{
  "slug": "gc8418",
  "version": "0.1.0",
  "type": "component",
  "description": "SX-globalchip Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "gc8418",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gc8418.kicad_sym",
    "gc8418.kicad_mod",
    "gc8418.glb",
    "gc8418.step",
    "gc8418.lbr",
    "docs/hero.png",
    "docs/gc8418-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "gc8418-hero.glb",
    "gc8418-hero.overlay.json",
    "gc8418-etched.glb"
  ],
  "component": {
    "mpn": "GC8418",
    "manufacturer": "SX-globalchip",
    "package": "SSOP-28",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "Audio Interface ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/5eed82f732027e374262df8f134ad9e5.pdf",
    "parts": {
      "symbol": "gc8418.kicad_sym",
      "footprint": "gc8418.kicad_mod",
      "model_3d": "gc8418-hero.glb",
      "model_3d_plain": "gc8418-etched.glb",
      "model_3d_step": "gc8418-etched.step",
      "model_3d_step_plain": "gc8418.step",
      "lbr": "gc8418.lbr"
    },
    "distributor_links": {
      "lcsc": "C16197184"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T01:34:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AUDIO",
        "type": "output",
        "description": "Channel-status audio bit that reads low for valid linear PCM audio (see non-audio detection); at reset it also selects the serial port format (SFSEL1)."
      },
      {
        "number": "2",
        "name": "96KHZ",
        "type": "output",
        "description": "96 kHz sample-rate detect output that reads 0 for sample rates at or below 48 kHz and 1 at or above 88.1 kHz, with the state undefined in between; at reset it selects the pre-emphasis audio matching function."
      },
      {
        "number": "3",
        "name": "RCBL",
        "type": "output",
        "description": "Receiver channel-status block start output that goes high two frames after a Z preamble, stays high for 16 frames, and changes on the RMCK rising edge; at reset it selects serial audio master or slave mode."
      },
      {
        "number": "4",
        "name": "U",
        "type": "output",
        "description": "User data output from the AES3 receiver, sampled on both edges of OLRCK; at reset it selects RMCK at 256Fs or 128Fs."
      },
      {
        "number": "5",
        "name": "C",
        "type": "output",
        "description": "Channel-status data output from the AES3 receiver, sampled on both edges of OLRCK; at reset it selects the serial port format (SFSEL0)."
      },
      {
        "number": "6",
        "name": "TX",
        "type": "output",
        "description": "Multiplexed S/PDIF output channel; at reset it also selects the phase detector type (PDUR), and if the TX path is unused the receiver input must be set so that TX is not used."
      },
      {
        "number": "7",
        "name": "VD",
        "type": "power_in",
        "description": "Digital power supply, normally +3.3 V or +5.0 V per the pin table, while the recommended VD range in Section 2 is 3.13 V to 3.6 V."
      },
      {
        "number": "8",
        "name": "RMCK",
        "type": "output",
        "description": "Recovered master clock output at 256×Fs by default, switched to 128×Fs via the RMCKF bit in register 01h, and placed in high impedance via the RXD bit in register 04h."
      },
      {
        "number": "9",
        "name": "SDOUT",
        "type": "output",
        "description": "Serial audio data output that must have a 47 kΩ pull-down resistor to GND."
      },
      {
        "number": "10",
        "name": "MCLK",
        "type": "input",
        "description": "DAC master clock input; RMCK/MCLK maximum frequency is 50 MHz."
      },
      {
        "number": "11",
        "name": "VQ",
        "type": "passive",
        "description": "Internal DAC DC bias voltage at 0.5·VAA VDC, with a maximum VQ current of 100 µA."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "DAC analog ground."
      },
      {
        "number": "13",
        "name": "AOUTL",
        "type": "output",
        "description": "Analog left-channel output with 0.65·VAA Vpp full-scale swing, maximum DC current 10 µA, maximum AC load 3 kΩ and maximum load capacitance 100 pF."
      },
      {
        "number": "14",
        "name": "FILT+",
        "type": "passive",
        "description": "DAC positive reference voltage pin."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "DAC power supply pin."
      },
      {
        "number": "16",
        "name": "AOUTR",
        "type": "output",
        "description": "Analog right-channel output with 0.65·VAA Vpp full-scale swing, maximum DC current 10 µA, maximum AC load 3 kΩ and maximum load capacitance 100 pF."
      },
      {
        "number": "17",
        "name": "RXP3",
        "type": "input",
        "description": "AES3/SPDIF positive input, single-ended or differential, selected through RXSEL[1:0]; AC-couple through 0.01 µF to 0.1 µF and leave unused inputs floating or tied to AGND."
      },
      {
        "number": "18",
        "name": "RXP2",
        "type": "input",
        "description": "AES3/SPDIF positive input, single-ended or differential, selected through RXSEL[1:0]; AC-couple through 0.01 µF to 0.1 µF and leave unused inputs floating or tied to AGND."
      },
      {
        "number": "19",
        "name": "RXP1",
        "type": "input",
        "description": "AES3/SPDIF positive input, single-ended or differential, selected through RXSEL[1:0]; AC-couple through 0.01 µF to 0.1 µF and leave unused inputs floating or tied to AGND."
      },
      {
        "number": "20",
        "name": "RXP0",
        "type": "input",
        "description": "AES3/SPDIF positive input, single-ended or differential, selected through RXSEL[1:0]; AC-couple through 0.01 µF to 0.1 µF and leave unused inputs floating or tied to AGND."
      },
      {
        "number": "21",
        "name": "RXN",
        "type": "input",
        "description": "AES3/SPDIF negative input shared by RXP[3:0]; for single-ended operation it is AC-coupled to ground through a capacitor."
      },
      {
        "number": "22",
        "name": "VA",
        "type": "power_in",
        "description": "Analog power supply, nominally +3.3 V; noise on this supply causes jitter in the recovered clock."
      },
      {
        "number": "23",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "24",
        "name": "FILT",
        "type": "passive",
        "description": "PLL filter output that requires an RC filter network between this pin and analog ground."
      },
      {
        "number": "25",
        "name": "RST",
        "type": "input",
        "description": "Reset input; holding it low enters low-power mode and resets internal state, and it must stay low at power-up until supplies and input clocks are stable in frequency and phase."
      },
      {
        "number": "26",
        "name": "RXSEL1",
        "type": "input",
        "description": "Receiver input multiplexer select bit 1, choosing one of RXP[3:0] as the receiver input."
      },
      {
        "number": "27",
        "name": "RXSEL0",
        "type": "input",
        "description": "Receiver input multiplexer select bit 0, choosing one of RXP[3:0] as the receiver input."
      },
      {
        "number": "28",
        "name": "NV/RERR",
        "type": "output",
        "description": "Error flag output; a 47 kΩ resistor to GND selects NVERR and a 47 kΩ resistor to VD selects RERR, with the mode latched at power-up."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin table lists pin 15 as VCC (DAC power), but Section 3.4 says the AUDIO output is on pin 15, while; Pin table says VD is normally +3.3 V or +5.0 V, but the recommended VD range is 3.13 V to 3.6 V and ; Pin table describes RXP[3:0] as a 4:2 S/PDIF mux, while Section 3.2 describes a 4:1 mux and an 8:2 m"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0607,
        "at": "2026-11-05T01:34:03"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/5eed82f732027e374262df8f134ad9e5.pdf",
        "pages": 11,
        "sha256": "399de7df769f4f41",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gc8418.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gc8418-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0f4456fbf4349b717a46ce5f3c1b9091e615e60faf77010bfe14bd733581d73",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}