main
History Download
Ray Publish 0.1.0 6af3503

GC7129BF

Sungine · Analog To Digital Converters (ADC) · LQFP-44(10x10)

GC7129BF from Sungine, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DGND power_in Internal digital-section reference ground, measured at 4.5-5.8 V (typ 5.3 V) below V+ with V+ to V- = 9 V, with a leakage limit of 1.2 mA at DGND = +0.5 V.
2 RANGE input Full-scale range select: 200 mV full scale when low (internal pull-down about 3 µA), 2 V full scale when high.
3 DP2 input Decimal point driver input; when high, it lights the first decimal point as printed in the datasheet.
4 DP1 input Decimal point driver input; when high, it lights the first decimal point.
5 OSC2 passive Output of the first-stage clock converter and input of the second-stage clock converter; clock frequency 120 kHz typ, 360 kHz max.
6 OSC1 input Input of the first-stage clock converter; clock frequency 120 kHz typ, 360 kHz max.
7 OSC3 output Output of the second-stage clock converter.
8 NC unconnected Empty pin, no internal connection.
9 NC unconnected Empty pin, no internal connection.
10 ANNUNCE DRIVE output Backplane square-wave output used to drive a buzzer.
11 B1,C1,CONT output Display segment output (segments B1, C1 and CONT as printed).
12 A1,G1,D1 output Display segment output (segments A1, G1 and D1).
13 F1,E1,DP1 output Display segment output (segments F1, E1 and DP1).
14 B2,C2,LO,BAT output Display segment output (segments B2, C2 and the LO and BAT annunciators as printed).
15 A2,G2,D2 output Display segment output (segments A2, G2 and D2).
16 F2,E2,DP2 output Display segment output (segments F2, E2 and DP2).
17 B3,C3,MINUS output Display segment output (segments B3, C3 and the MINUS sign).
18 A3,G3,D3 output Display segment output (segments A3, G3 and D3).
19 F3,E3,DP3 output Display segment output (segments F3, E3 and DP3).
20 B4,C4,BC5 output Display segment output (segments B4, C4 and BC5 as printed).
21 A4,D4,G4 output Display segment output (segments A4, D4 and G4).
22 F4,E4,DP4 output Display segment output (segments F4, E4 and DP4).
23 BP3 output Display backplane driver 3 output.
24 BP2 output Display backplane driver 2 output.
25 BP1 output Display backplane driver 1 output.
26 VDISP power_in Negative supply input for display drive; resistance from VDISP to V+ is 50 kΩ typ.
27 DP4/OR bidirectional Input: when high, lights the most significant decimal point. Output: goes high when the count exceeds ±19,999 (overrange).
28 DP3/UR bidirectional Input: when high, lights the second decimal point. Output: goes high when the count is below ±1000 (underrange).
29 LATCH/HOLD bidirectional Input: when floating, the ADC runs in free-run mode; when high, the last reading is held; when low, the result counter contents are acted on (sentence truncated in source). Output: goes low when the data latch updates and can serve as a converter status signal.
30 NC unconnected Empty pin, no internal connection.
31 NC unconnected Empty pin, no internal connection.
32 V- power_in Negative power supply connection; supply V+ to V- is 6-12 V (9 V typ), absolute maximum 15 V.
33 V+ power_in Positive power supply connection; supply V+ to V- is 6-12 V (9 V typ), absolute maximum 15 V.
34 INT IN input Integrator input.
35 INT OUT output Integrator output.
36 CONTINUITY bidirectional Input: when low, the continuity indicator is not shown; when high, it is shown. Output: goes high when the input is below +200 mV (output sentence truncated in source).
37 COMMON passive Sets the common-mode voltage; V+ to this pin is 2.8-3.5 V (3.2 V typ).
38 CREF+ passive Positive terminal of the external reference capacitor.
39 CREF- passive Negative terminal of the external reference capacitor.
40 BUFF output Output of the buffer amplifier.
41 IN LO input Negative differential input terminal; common-mode range is (V-)+1.5 V to (V+)-1 V.
42 IN HI input Positive differential input terminal; input may exceed the supply but input current must be limited to ±400 µA.
43 REF HI input Positive reference voltage input; reference must lie within the V+ to V- range.
44 REF LO input Negative reference voltage input; reference must lie within the V+ to V- range.

Key specifications

Parameter Value
Manufacturer Sungine
Package LQFP-44(10x10)
Category Data Acquisition
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
工作温度 (operating temperature, -40 to +105) -40 105 ℃ 8
电源电压 (supply voltage V+ to V-) 15 V 8
贮存温度 (storage temperature) -65 150 ℃ 8
工作温度 (operating temperature, 0 to +70) 0 70 ℃ 8
最大结温 (maximum junction temperature) 150 ℃ 8
输入电流 (input current limit, note 1) -400 400 µA Note 1: input voltage may exceed supply; input current must be limited to ±400µA 8
零输入读数 0 0 0 读数 VIN=0V~200mV 9
零读数温漂 -0.5 0.5 µV/℃ VIN=0V, 0℃<TA<+70℃ 9
最大量程 9997 9999 10000 读数 VIN=VREF=1000mV, Range=2V 9
精确度 0.9999 1 1.0001 比例 9
翻转误差 RE RE 1 2 读数 VIN-=VIN+=199mV 9
输入漏电流 IIN IIN 1 10 pA VIN=0V 9
量程标度因子温度系数 2 7 ppm/℃ VIN=199mV, 0℃<TA<+70℃, VREF=0ppm/℃ 9
公共电压 VCOM VCOM 2.8 3.2 3.5 V V+到 28 脚 9
数字地电压 DGND DGND 4.5 5.3 5.8 V V+到 36 脚, V+到 V-=9V 9
电源电压范围 6 9 12 V 9
电源电流(除公共电流外)IS IS 0.8 1.3 mA V+到 V-=9V 9
时钟频率 tCLK tCLK 120 360 kHz 9
欠电压标志激活电压 6.3 7.2 7.7 V V+到 V- 10
连续比较器极限电压 (row 1) VOUT 100 200 mV 10
连续比较器极限电压 (row 2) VOUT 200 400 mV 10
下拉电流 2 10 µA 10

CAD (KiCad official)

  • Symbol: GC7129BF
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: gc7129bf-etched.step / gc7129bf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gc7129bf.step / gc7129bf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sungine datasheet (12 pp, sha256 ef542b7692799dc8, retrieved 2026-11-10, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF