GBI5130QYAR

{
  "slug": "gbi5130qyar",
  "version": "0.1.0",
  "type": "component",
  "description": "GOSEMICON Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "gbi5130qyar",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gbi5130qyar.kicad_sym",
    "gbi5130qyar.kicad_mod",
    "gbi5130qyar.glb",
    "gbi5130qyar.step",
    "gbi5130qyar.lbr",
    "docs/hero.png",
    "docs/gbi5130qyar-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "gbi5130qyar-hero.glb",
    "gbi5130qyar-hero.overlay.json",
    "gbi5130qyar-etched.glb"
  ],
  "component": {
    "mpn": "GBI5130QYAR",
    "manufacturer": "GOSEMICON",
    "package": "QFN-20(3.5x3.5)",
    "pin_count": 21,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603383689095368704",
    "parts": {
      "symbol": "gbi5130qyar.kicad_sym",
      "footprint": "gbi5130qyar.kicad_mod",
      "model_3d": "gbi5130qyar-hero.glb",
      "model_3d_plain": "gbi5130qyar-etched.glb",
      "model_3d_step": "gbi5130qyar-etched.step",
      "model_3d_step_plain": "gbi5130qyar.step",
      "lbr": "gbi5130qyar.lbr"
    },
    "distributor_links": {
      "lcsc": "C28324640"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T00:57:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin that requires a 22µF or larger capacitor (10µF or greater effective capacitance) for stability, placed as close to the device as possible."
      },
      {
        "number": "2",
        "name": "SNS",
        "type": "input",
        "description": "Output voltage sense pin, connected only when setting VOUT through PCB layout with no external resistor, and kept floating when VOUT is set by an external resistor."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin to the error amplifier, where a 10nF feed-forward capacitor to OUT is recommended but may disrupt Power-Good functionality."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that is active high when VOUT is above 91% of target and is pulled low below 85% of target, during EN shutdown, OTP, or OCP."
      },
      {
        "number": "5",
        "name": "25mV",
        "type": "input",
        "description": "Voltage setting pin for the internal feedback network that is tied to GND to increase VOUT, tied to SNS to increase resolution, or left floating when not used."
      },
      {
        "number": "6",
        "name": "50mV",
        "type": "input",
        "description": "Voltage setting pin for the internal feedback network that is tied to GND to increase VOUT, tied to SNS to increase resolution, or left floating when not used."
      },
      {
        "number": "7",
        "name": "100mV",
        "type": "input",
        "description": "Voltage setting pin for the internal feedback network that is tied to GND to increase VOUT, tied to SNS to increase resolution, or left floating when not used."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected to ground, the thermal pad, and the other GND pins with a low-impedance connection."
      },
      {
        "number": "9",
        "name": "200mV",
        "type": "input",
        "description": "Voltage setting pin for the internal feedback network that is tied to GND to increase VOUT, tied to SNS to increase resolution, or left floating when not used."
      },
      {
        "number": "10",
        "name": "400mV",
        "type": "input",
        "description": "Voltage setting pin for the internal feedback network that is tied to GND to increase VOUT, tied to SNS to increase resolution, or left floating when not used."
      },
      {
        "number": "11",
        "name": "800mV",
        "type": "input",
        "description": "Voltage setting pin for the internal feedback network that is tied to GND to increase VOUT, tied to SNS to increase resolution, or left floating when not used."
      },
      {
        "number": "12",
        "name": "BIAS",
        "type": "input",
        "description": "BIAS supply voltage that enables LILO operation (for example VIN=1.2V, VOUT=1V) and requires a 1µF (0.47µF minimum) capacitor to ground, or is left floating or tied to ground if unused."
      },
      {
        "number": "13",
        "name": "NR/SS",
        "type": "bidirectional",
        "description": "Noise-reduction and soft-start pin where a capacitor to ground reduces reference noise and sets soft-start, with 10nF or larger recommended as close to the pin as possible."
      },
      {
        "number": "14",
        "name": "EN",
        "type": "input",
        "description": "Enable pin where logic high enables the device and logic low disables it, and it must be tied to IN or BIAS if enable functionality is not required."
      },
      {
        "number": "15",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin requiring a 10µF or larger ceramic capacitor (5µF minimum capacitance) from IN to ground, placed as close as possible to the input."
      },
      {
        "number": "16",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin requiring a 10µF or larger ceramic capacitor (5µF minimum capacitance) from IN to ground, placed as close as possible to the input."
      },
      {
        "number": "17",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin requiring a 10µF or larger ceramic capacitor (5µF minimum capacitance) from IN to ground, placed as close as possible to the input."
      },
      {
        "number": "18",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected to ground, the thermal pad, and the other GND pins with a low-impedance connection."
      },
      {
        "number": "19",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin that requires a 22µF or larger capacitor (10µF or greater effective capacitance) for stability, placed as close to the device as possible."
      },
      {
        "number": "20",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin that requires a 22µF or larger capacitor (10µF or greater effective capacitance) for stability, placed as close to the device as possible."
      },
      {
        "number": "21",
        "name": "THERMAL PAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad is listed in the datasheet as 'THERMAL PAD' with no pin number, so it is not; The top-view pin configuration diagram on page 2 is garbled in the extracted text, so the pin-to-pos; The datasheet classifies BIAS as 'I' (input) and it is described as a BIAS supply voltage; it is rec",
          "exposed pad 21 added from the footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0513,
        "at": "2026-10-18T00:54:05"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603383689095368704",
        "pages": 34,
        "sha256": "b616a292ad948922",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gbi5130qyar.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0c34890ba198501211c2a811897b2f6583e3a7c95e85a76202d32538b7a7351",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gbi5130qyar-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.52,
          3.52,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "acef9a8120083d61e44ae5e7b0b95979a7847d99e58cb438fc2675554b3e8e07",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}