GBI1600TKBR

{
  "slug": "gbi1600tkbr",
  "version": "0.1.0",
  "type": "component",
  "description": "GOSEMICON DC-DC Converters, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "gbi1600tkbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "gbi1600tkbr.kicad_sym",
    "gbi1600tkbr.kicad_mod",
    "gbi1600tkbr.glb",
    "gbi1600tkbr.step",
    "gbi1600tkbr.lbr",
    "docs/hero.png",
    "docs/gbi1600tkbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "gbi1600tkbr-hero.glb",
    "gbi1600tkbr-hero.overlay.json",
    "gbi1600tkbr-etched.glb"
  ],
  "component": {
    "mpn": "GBI1600TKBR",
    "manufacturer": "GOSEMICON",
    "package": "TSOT-23-6L",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756313145864667136",
    "parts": {
      "symbol": "gbi1600tkbr.kicad_sym",
      "footprint": "gbi1600tkbr.kicad_mod",
      "model_3d": "gbi1600tkbr-hero.glb",
      "model_3d_plain": "gbi1600tkbr-etched.glb",
      "model_3d_step": "gbi1600tkbr-etched.step",
      "model_3d_step_plain": "gbi1600tkbr.step",
      "lbr": "gbi1600tkbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5451750"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T03:05:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "input",
        "description": "Bootstrap supply for the high-side MOSFET gate driver, which requires a 0.1uF or greater ceramic capacitor between BOOT and SW and a BOOT-to-SW voltage above 2.6V for full-duty operation."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground for the device, which should be tied to the system ground plane at a single point as the layout guideline recommends."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Buck converter feedback sensing input, connected to a resistor divider from VOUT, which the device regulates to the internal 0.770V reference typically (750mV to 790mV)."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "High-voltage enable input that can be floated to enable the device or tied to VIN for automatic start-up, with precision thresholds of 1.21V rising and 1.07V falling and a maximum voltage of 60V."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input for the regulator, which must be locally bypassed and operates over 4V to 60V."
      },
      {
        "number": "6",
        "name": "SW",
        "type": "output",
        "description": "Switching node of the buck converter, rated -0.6V to 65V to GND (-4V to 65V for transients of 20ns or less)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The 'NC 4,6' row in the pin table is printed in the SOT23-6 column, but pins 4 and 6 are already ass; The datasheet table marks BOOT and VIN as type 'I' (input), not power. BOOT was mapped to input as p; The 2.6V BOOT-to-SW figure in the pin description comes from the Bootstrap Voltage Regulator section"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0703,
        "at": "2026-10-18T03:03:21"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756313145864667136",
        "pages": 19,
        "sha256": "3c48a9227ddae0ee",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "gbi1600tkbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "gbi1600tkbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f11c808268fcc0b8043a06ea65b67dcf0f717aaa7e7abb4a300e6b13ca8f930e",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}