component
FXLS8471QR1
Public Made by Adomby adom
NXP Semicon Accelerometers, QFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
506bc56
FXLS8471QR1
NXP Semicon · Accelerometers · QFN-16(3x3)
FXLS8471QR1 from NXP Semicon, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDIO | power_in | Interface power supply, 1.62 V to 3.6 V, decoupled with a 100 nF ceramic capacitor placed as close as possible to the pin. |
| 2 | BYP | passive | Internal regulator output bypass capacitor connection. |
| 3 | Reserved | passive | Test reserved, connect to GND. |
| 4 | SCL/SCLK | input | I2C serial clock (open drain, needs pullup) or SPI clock, not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 5 | GND | power_in | Ground. |
| 6 | SDA/MOSI | bidirectional | I2C serial data (open drain, needs pullup) or SPI master out slave in, not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 7 | SA0/MISO | bidirectional | I2C address selection bit 0 or SPI master in slave out; its state at power-up or reset selects the interface mode (GND or VDDIO = I2C, floating = SPI). |
| 8 | n.c. | unconnected | Internally not connected. |
| 9 | INT2 | output | Interrupt 2, user programmable function and timing, can be configured open-drain with external pullup. |
| 10 | SA1/CS_B | input | I2C address selection bit 1 or SPI chip select (active low), not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 11 | INT1 | output | Interrupt 1, user programmable function and timing, can be configured open-drain with external pullup; also signals reset completion. |
| 12 | GND | power_in | Ground. |
| 13 | Reserved | passive | Test reserved, connect to GND. |
| 14 | VDD | power_in | Power supply, 1.95 V to 3.6 V, decoupled with 100 nF ceramic plus 4.7 uF bulk capacitors placed as close as possible to the pin. |
| 15 | N/C | unconnected | Internally not connected. |
| 16 | RST | input | Reset input, active high; connect to GND if unused; not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 1.95 | 3.3 | 3.6 | V | 14 | |
| Interface supply voltage | VDDIO | 1.62 | 3.3 | 3.6 | V | 14 | |
| Value of capacitor on BYP pin | CBYP | 75 | 100 | 470 | nF | -40°C to 105°C | 14 |
| Sensitivity ±2 g | SEN | 3686 | 4096 | 4506 | LSB/g | ±2 g mode, -40°C to 105°C | 13 |
| Sensitivity ±4 g | SEN | 1843 | 2048 | 2253 | LSB/g | ±4 g mode, -40°C to 105°C | 13 |
| Sensitivity ±8 g | SEN | 922 | 1024 | 1126 | LSB/g | ±8 g mode, -40°C to 105°C | 13 |
| Sensitivity accuracy | SEN-TOL | -10 | 2.5 | 10 | %SEN | @ 25°C | 13 |
| Zero-g level offset accuracy | OFFRT | -20 | 20 | mg | ±2 g, ±4 g, ±8 g ranges, 25 °C | 13 | |
| Zero-g offset accuracy over temperature | OFFOT-2G | -80 | 80 | mg | ±2 g range, -40 °C to 105 °C | 13 | |
| Zero-g offset post-board mount | OFFPBM | -30 | 30 | mg | ±2 g, ±4 g, ±8 g modes | 13 | |
| Zero-g level change vs temperature | TCOTR1 | -0.2 | 0.2 | mg/°C | -40°C to 85°C | 13 | |
| Zero-g level change vs temperature | TCOTR2 | -0.3 | 0.3 | mg/°C | -40°C to 105°C | 13 | |
| Sensitivity change with temperature | TCS | -0.01 | 0.01 | %/°C | ±2 g, ±4 g, ±8 g modes | 13 | |
| Cross-axis sensitivity | CAS | -0.5 | 0.5 | %FS | Over ±1 g range in Normal mode | 13 | |
| Nonlinearity | NL | -0.5 | 0.5 | %FSR | Over ±1 g range in Normal mode | 13 | |
| Self-test output change X | STOCOT | 192 | 1000 | LSB | ±2 g range, -40 °C to 105 °C | 13 | |
| Self-test output change Y | STOCOT | 270 | 1000 | LSB | ±2 g range, -40 °C to 105 °C | 13 | |
| Self-test output change Z | STOCOT | 1275 | 6000 | LSB | ±2 g range, -40 °C to 105 °C | 13 | |
| Operating temperature range | TOP | -40 | 105 | °C | 14 | ||
| Digital high-level input voltage RST | VIHRST | 1.04 | V | RST pin | 14 | ||
| Digital low-level input voltage RST | VILRST | 0.68 | V | RST pin | 14 | ||
| Digital high-level input voltage | VIH | 0.75 | V | SCL/SCLK, SDA/MOSI, SA0/MISO, SA1/CS_B; value is 0.75*VDDIO | 14 | ||
| Digital low-level input voltage | VIL | 0.3 | V | SCL/SCLK, SDA/MOSI, SA0/MISO, SA1/CS_B; value is 0.3*VDDIO | 14 | ||
| High-level output voltage | VOH | 0.9 | V | INT1, INT2, SDA/MOSI; IO = 500 µA; value is 0.9*VDDIO | 14 | ||
| Low-level output voltage | VOL | 0.1 | V | INT1, INT2, SDA/MOSI; IO = 500 µA; value is 0.1*VDDIO | 14 | ||
| Standby mode current | IddSTBY-OT | 13.5 | µA | Standby mode; -40 to +105 °C | 14 | ||
| IDD normal mode ODR 800 Hz | IddNM-OT | 274 | µA | -40 °C to 105 °C, ODR = 800 Hz | 14 | ||
| Peak current during boot | IddBOOT | 3 | mA | VDD = 2.5 V; 25 °C; 1ms max duration, using the recommended bypass capacitors | 14 | ||
| SCL, SDA pin leakage | 1 | 10 | nA | 25°C typ; -40°C to 105°C max | 14 | ||
| SCL, SDA pin capacitance | 3 | pf | 14 | ||||
| VDD rise time | 0.001 | 1000 | ms | 14 | |||
| Boot time | TBOOT | 1000 | µs | Time from VDDIO on and VDD > VDD min until I2C/SPI interface ready | 14 | ||
| ODR accuracy | -2 | 2 | % | 14 | |||
| Temperature sensor sensitivity tolerance | SENTOL-TEMP | -2.5 | 2.5 | % | 15 | ||
| Absolute max VDD | VDDmax | -0.3 | 3.6 | V | Supply voltage, interface supply voltage | 12 | |
| Absolute max VDDIO | VDDIOmax | -0.3 | 3.6 | V | 12 | ||
| Maximum acceleration | gmax | 5000 | g | all axes, 100 μs | 12 | ||
| Storage temperature | TSTG | -40 | 125 | °C | 12 | ||
| Drop-test height | Ddrop | 1.8 | m | 12 | |||
| ESD HBM | HBM | -2000 | 2000 | V | Human body model | 12 | |
| ESD MM | MM | -200 | 200 | V | Machine model | 12 | |
| ESD CDM | CDM | -500 | 500 | V | Charge device model | 12 | |
| Latchup current | ILU | -100 | 100 | mA | T = 105 °C (per AEC-Q100-004) | 12 | |
| Junction-to-ambient, single-layer board | RθJA | 163 | °C/W | Natural convection, single-layer board | 74 | ||
| Junction-to-ambient, four-layer board | RθJA | 70 | °C/W | Natural convection, four-layer board | 74 | ||
| Junction-to-board | RθJB | 33 | °C/W | 74 | |||
| Junction-to-case (top) | RθJCTop | 84 | °C/W | 74 | |||
| Junction-to-package (top) | ΨJT | 6 | °C/W | Natural convection | 74 | ||
| IDD low-power mode ODR 12.5 Hz | IddLPM-RT | 8 | µA | 25 °C, ODR = 12.5 Hz | 14 | ||
| IDD normal mode ODR 800 Hz | IddNM-RT | 240 | µA | 25 °C, ODR = 800 Hz | 14 | ||
| Standby mode current | IddSTBY-RT | 2 | µA | Standby mode, 25°C | 14 | ||
| Output noise density low-noise mode | NDLNM | 99 | µg/√Hz | ODR = 400 Hz, low-noise mode | 13 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | (green) and lead-free terminations. These terminations are compatible with tin-lead | 73 |
CAD (KiCad official)
- Symbol:
FXLS8471QR1 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
fxls8471qr1-etched.step/fxls8471qr1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fxls8471qr1.step/fxls8471qr1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (86 pp, sha256
df5a656dc7f3386c, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FXLS8471QR1
**NXP Semicon** · Accelerometers · QFN-16(3x3)
FXLS8471QR1 from NXP Semicon, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDIO | power_in | Interface power supply, 1.62 V to 3.6 V, decoupled with a 100 nF ceramic capacitor placed as close as possible to the pin. |
| 2 | BYP | passive | Internal regulator output bypass capacitor connection. |
| 3 | Reserved | passive | Test reserved, connect to GND. |
| 4 | SCL/SCLK | input | I2C serial clock (open drain, needs pullup) or SPI clock, not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 5 | GND | power_in | Ground. |
| 6 | SDA/MOSI | bidirectional | I2C serial data (open drain, needs pullup) or SPI master out slave in, not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 7 | SA0/MISO | bidirectional | I2C address selection bit 0 or SPI master in slave out; its state at power-up or reset selects the interface mode (GND or VDDIO = I2C, floating = SPI). |
| 8 | n.c. | unconnected | Internally not connected. |
| 9 | INT2 | output | Interrupt 2, user programmable function and timing, can be configured open-drain with external pullup. |
| 10 | SA1/CS_B | input | I2C address selection bit 1 or SPI chip select (active low), not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 11 | INT1 | output | Interrupt 1, user programmable function and timing, can be configured open-drain with external pullup; also signals reset completion. |
| 12 | GND | power_in | Ground. |
| 13 | Reserved | passive | Test reserved, connect to GND. |
| 14 | VDD | power_in | Power supply, 1.95 V to 3.6 V, decoupled with 100 nF ceramic plus 4.7 uF bulk capacitors placed as close as possible to the pin. |
| 15 | N/C | unconnected | Internally not connected. |
| 16 | RST | input | Reset input, active high; connect to GND if unused; not tolerant of voltages exceeding VDDIO + 0.3 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 1.95 | 3.3 | 3.6 | V | | 14 |
| Interface supply voltage | VDDIO | 1.62 | 3.3 | 3.6 | V | | 14 |
| Value of capacitor on BYP pin | CBYP | 75 | 100 | 470 | nF | -40°C to 105°C | 14 |
| Sensitivity ±2 g | SEN | 3686 | 4096 | 4506 | LSB/g | ±2 g mode, -40°C to 105°C | 13 |
| Sensitivity ±4 g | SEN | 1843 | 2048 | 2253 | LSB/g | ±4 g mode, -40°C to 105°C | 13 |
| Sensitivity ±8 g | SEN | 922 | 1024 | 1126 | LSB/g | ±8 g mode, -40°C to 105°C | 13 |
| Sensitivity accuracy | SEN-TOL | -10 | 2.5 | 10 | %SEN | @ 25°C | 13 |
| Zero-g level offset accuracy | OFFRT | -20 | | 20 | mg | ±2 g, ±4 g, ±8 g ranges, 25 °C | 13 |
| Zero-g offset accuracy over temperature | OFFOT-2G | -80 | | 80 | mg | ±2 g range, -40 °C to 105 °C | 13 |
| Zero-g offset post-board mount | OFFPBM | -30 | | 30 | mg | ±2 g, ±4 g, ±8 g modes | 13 |
| Zero-g level change vs temperature | TCOTR1 | -0.2 | | 0.2 | mg/°C | -40°C to 85°C | 13 |
| Zero-g level change vs temperature | TCOTR2 | -0.3 | | 0.3 | mg/°C | -40°C to 105°C | 13 |
| Sensitivity change with temperature | TCS | -0.01 | | 0.01 | %/°C | ±2 g, ±4 g, ±8 g modes | 13 |
| Cross-axis sensitivity | CAS | -0.5 | | 0.5 | %FS | Over ±1 g range in Normal mode | 13 |
| Nonlinearity | NL | -0.5 | | 0.5 | %FSR | Over ±1 g range in Normal mode | 13 |
| Self-test output change X | STOCOT | 192 | | 1000 | LSB | ±2 g range, -40 °C to 105 °C | 13 |
| Self-test output change Y | STOCOT | 270 | | 1000 | LSB | ±2 g range, -40 °C to 105 °C | 13 |
| Self-test output change Z | STOCOT | 1275 | | 6000 | LSB | ±2 g range, -40 °C to 105 °C | 13 |
| Operating temperature range | TOP | -40 | | 105 | °C | | 14 |
| Digital high-level input voltage RST | VIHRST | 1.04 | | | V | RST pin | 14 |
| Digital low-level input voltage RST | VILRST | | | 0.68 | V | RST pin | 14 |
| Digital high-level input voltage | VIH | 0.75 | | | V | SCL/SCLK, SDA/MOSI, SA0/MISO, SA1/CS_B; value is 0.75*VDDIO | 14 |
| Digital low-level input voltage | VIL | | | 0.3 | V | SCL/SCLK, SDA/MOSI, SA0/MISO, SA1/CS_B; value is 0.3*VDDIO | 14 |
| High-level output voltage | VOH | 0.9 | | | V | INT1, INT2, SDA/MOSI; IO = 500 µA; value is 0.9*VDDIO | 14 |
| Low-level output voltage | VOL | | | 0.1 | V | INT1, INT2, SDA/MOSI; IO = 500 µA; value is 0.1*VDDIO | 14 |
| Standby mode current | IddSTBY-OT | | | 13.5 | µA | Standby mode; -40 to +105 °C | 14 |
| IDD normal mode ODR 800 Hz | IddNM-OT | | | 274 | µA | -40 °C to 105 °C, ODR = 800 Hz | 14 |
| Peak current during boot | IddBOOT | | | 3 | mA | VDD = 2.5 V; 25 °C; 1ms max duration, using the recommended bypass capacitors | 14 |
| SCL, SDA pin leakage | | | 1 | 10 | nA | 25°C typ; -40°C to 105°C max | 14 |
| SCL, SDA pin capacitance | | | 3 | | pf | | 14 |
| VDD rise time | | 0.001 | | 1000 | ms | | 14 |
| Boot time | TBOOT | | | 1000 | µs | Time from VDDIO on and VDD > VDD min until I2C/SPI interface ready | 14 |
| ODR accuracy | | -2 | | 2 | % | | 14 |
| Temperature sensor sensitivity tolerance | SENTOL-TEMP | -2.5 | | 2.5 | % | | 15 |
| Absolute max VDD | VDDmax | -0.3 | | 3.6 | V | Supply voltage, interface supply voltage | 12 |
| Absolute max VDDIO | VDDIOmax | -0.3 | | 3.6 | V | | 12 |
| Maximum acceleration | gmax | | | 5000 | g | all axes, 100 μs | 12 |
| Storage temperature | TSTG | -40 | | 125 | °C | | 12 |
| Drop-test height | Ddrop | | | 1.8 | m | | 12 |
| ESD HBM | HBM | -2000 | | 2000 | V | Human body model | 12 |
| ESD MM | MM | -200 | | 200 | V | Machine model | 12 |
| ESD CDM | CDM | -500 | | 500 | V | Charge device model | 12 |
| Latchup current | ILU | -100 | | 100 | mA | T = 105 °C (per AEC-Q100-004) | 12 |
| Junction-to-ambient, single-layer board | RθJA | | 163 | | °C/W | Natural convection, single-layer board | 74 |
| Junction-to-ambient, four-layer board | RθJA | | 70 | | °C/W | Natural convection, four-layer board | 74 |
| Junction-to-board | RθJB | | 33 | | °C/W | | 74 |
| Junction-to-case (top) | RθJCTop | | 84 | | °C/W | | 74 |
| Junction-to-package (top) | ΨJT | | 6 | | °C/W | Natural convection | 74 |
| IDD low-power mode ODR 12.5 Hz | IddLPM-RT | | 8 | | µA | 25 °C, ODR = 12.5 Hz | 14 |
| IDD normal mode ODR 800 Hz | IddNM-RT | | 240 | | µA | 25 °C, ODR = 800 Hz | 14 |
| Standby mode current | IddSTBY-RT | | 2 | | µA | Standby mode, 25°C | 14 |
| Output noise density low-noise mode | NDLNM | | 99 | | µg/√Hz | ODR = 400 Hz, low-noise mode | 13 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | (green) and lead-free terminations. These terminations are compatible with tin-lead | 73 |
## CAD (KiCad official)
- Symbol: `FXLS8471QR1`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files: `fxls8471qr1-etched.step` / `fxls8471qr1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fxls8471qr1.step` / `fxls8471qr1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/FXLS8471QR1.pdf) (86 pp, sha256 `df5a656dc7f3386c`, retrieved 2026-10-26, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fxls8471qr1-datasheet.pdf)