Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FXLS8471QR1

NXP Semicon · Accelerometers · QFN-16(3x3)

FXLS8471QR1 from NXP Semicon, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDDIO power_in Interface power supply, 1.62 V to 3.6 V, decoupled with a 100 nF ceramic capacitor placed as close as possible to the pin.
2 BYP passive Internal regulator output bypass capacitor connection.
3 Reserved passive Test reserved, connect to GND.
4 SCL/SCLK input I2C serial clock (open drain, needs pullup) or SPI clock, not tolerant of voltages exceeding VDDIO + 0.3 V.
5 GND power_in Ground.
6 SDA/MOSI bidirectional I2C serial data (open drain, needs pullup) or SPI master out slave in, not tolerant of voltages exceeding VDDIO + 0.3 V.
7 SA0/MISO bidirectional I2C address selection bit 0 or SPI master in slave out; its state at power-up or reset selects the interface mode (GND or VDDIO = I2C, floating = SPI).
8 n.c. unconnected Internally not connected.
9 INT2 output Interrupt 2, user programmable function and timing, can be configured open-drain with external pullup.
10 SA1/CS_B input I2C address selection bit 1 or SPI chip select (active low), not tolerant of voltages exceeding VDDIO + 0.3 V.
11 INT1 output Interrupt 1, user programmable function and timing, can be configured open-drain with external pullup; also signals reset completion.
12 GND power_in Ground.
13 Reserved passive Test reserved, connect to GND.
14 VDD power_in Power supply, 1.95 V to 3.6 V, decoupled with 100 nF ceramic plus 4.7 uF bulk capacitors placed as close as possible to the pin.
15 N/C unconnected Internally not connected.
16 RST input Reset input, active high; connect to GND if unused; not tolerant of voltages exceeding VDDIO + 0.3 V.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 1.95 3.3 3.6 V 14
Interface supply voltage VDDIO 1.62 3.3 3.6 V 14
Value of capacitor on BYP pin CBYP 75 100 470 nF -40°C to 105°C 14
Sensitivity ±2 g SEN 3686 4096 4506 LSB/g ±2 g mode, -40°C to 105°C 13
Sensitivity ±4 g SEN 1843 2048 2253 LSB/g ±4 g mode, -40°C to 105°C 13
Sensitivity ±8 g SEN 922 1024 1126 LSB/g ±8 g mode, -40°C to 105°C 13
Sensitivity accuracy SEN-TOL -10 2.5 10 %SEN @ 25°C 13
Zero-g level offset accuracy OFFRT -20 20 mg ±2 g, ±4 g, ±8 g ranges, 25 °C 13
Zero-g offset accuracy over temperature OFFOT-2G -80 80 mg ±2 g range, -40 °C to 105 °C 13
Zero-g offset post-board mount OFFPBM -30 30 mg ±2 g, ±4 g, ±8 g modes 13
Zero-g level change vs temperature TCOTR1 -0.2 0.2 mg/°C -40°C to 85°C 13
Zero-g level change vs temperature TCOTR2 -0.3 0.3 mg/°C -40°C to 105°C 13
Sensitivity change with temperature TCS -0.01 0.01 %/°C ±2 g, ±4 g, ±8 g modes 13
Cross-axis sensitivity CAS -0.5 0.5 %FS Over ±1 g range in Normal mode 13
Nonlinearity NL -0.5 0.5 %FSR Over ±1 g range in Normal mode 13
Self-test output change X STOCOT 192 1000 LSB ±2 g range, -40 °C to 105 °C 13
Self-test output change Y STOCOT 270 1000 LSB ±2 g range, -40 °C to 105 °C 13
Self-test output change Z STOCOT 1275 6000 LSB ±2 g range, -40 °C to 105 °C 13
Operating temperature range TOP -40 105 °C 14
Digital high-level input voltage RST VIHRST 1.04 V RST pin 14
Digital low-level input voltage RST VILRST 0.68 V RST pin 14
Digital high-level input voltage VIH 0.75 V SCL/SCLK, SDA/MOSI, SA0/MISO, SA1/CS_B; value is 0.75*VDDIO 14
Digital low-level input voltage VIL 0.3 V SCL/SCLK, SDA/MOSI, SA0/MISO, SA1/CS_B; value is 0.3*VDDIO 14
High-level output voltage VOH 0.9 V INT1, INT2, SDA/MOSI; IO = 500 µA; value is 0.9*VDDIO 14
Low-level output voltage VOL 0.1 V INT1, INT2, SDA/MOSI; IO = 500 µA; value is 0.1*VDDIO 14
Standby mode current IddSTBY-OT 13.5 µA Standby mode; -40 to +105 °C 14
IDD normal mode ODR 800 Hz IddNM-OT 274 µA -40 °C to 105 °C, ODR = 800 Hz 14
Peak current during boot IddBOOT 3 mA VDD = 2.5 V; 25 °C; 1ms max duration, using the recommended bypass capacitors 14
SCL, SDA pin leakage 1 10 nA 25°C typ; -40°C to 105°C max 14
SCL, SDA pin capacitance 3 pf 14
VDD rise time 0.001 1000 ms 14
Boot time TBOOT 1000 µs Time from VDDIO on and VDD > VDD min until I2C/SPI interface ready 14
ODR accuracy -2 2 % 14
Temperature sensor sensitivity tolerance SENTOL-TEMP -2.5 2.5 % 15
Absolute max VDD VDDmax -0.3 3.6 V Supply voltage, interface supply voltage 12
Absolute max VDDIO VDDIOmax -0.3 3.6 V 12
Maximum acceleration gmax 5000 g all axes, 100 μs 12
Storage temperature TSTG -40 125 °C 12
Drop-test height Ddrop 1.8 m 12
ESD HBM HBM -2000 2000 V Human body model 12
ESD MM MM -200 200 V Machine model 12
ESD CDM CDM -500 500 V Charge device model 12
Latchup current ILU -100 100 mA T = 105 °C (per AEC-Q100-004) 12
Junction-to-ambient, single-layer board RθJA 163 °C/W Natural convection, single-layer board 74
Junction-to-ambient, four-layer board RθJA 70 °C/W Natural convection, four-layer board 74
Junction-to-board RθJB 33 °C/W 74
Junction-to-case (top) RθJCTop 84 °C/W 74
Junction-to-package (top) ΨJT 6 °C/W Natural convection 74
IDD low-power mode ODR 12.5 Hz IddLPM-RT 8 µA 25 °C, ODR = 12.5 Hz 14
IDD normal mode ODR 800 Hz IddNM-RT 240 µA 25 °C, ODR = 800 Hz 14
Standby mode current IddSTBY-RT 2 µA Standby mode, 25°C 14
Output noise density low-noise mode NDLNM 99 µg/√Hz ODR = 400 Hz, low-noise mode 13

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin (green) and lead-free terminations. These terminations are compatible with tin-lead 73

CAD (KiCad official)

  • Symbol: FXLS8471QR1
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: fxls8471qr1-etched.step / fxls8471qr1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fxls8471qr1.step / fxls8471qr1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (86 pp, sha256 df5a656dc7f3386c, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF