main
History Download
Ray Publish 0.1.0 1a67f19

FU6861L

Fortior Tech · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

FU6861L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P2.3/AD1/AMP2O/CMP4P bidirectional GPIO P2.3 with external interrupt 1 input, also ADC channel 1 input for phase current 2 amplifier output, AMP2 output and CMP4 positive input.
2 P2.4/AD2 bidirectional GPIO P2.4 with external interrupt 1 input, also ADC channel 2 input for the bus voltage signal.
3 P2.6/CMP3M/DA0/AD11 bidirectional GPIO P2.6 with external interrupt 1 input, also overcurrent reference input and CMP3 negative input, internal DAC output without buffer, and ADC channel 11 input.
4 P2.7/AD4/CMP3P/AMP0O/CMP4M bidirectional GPIO P2.7 with external interrupt 1 input, also ADC channel 4 input for the amplified bus current, CMP3 positive input for overcurrent detection, AMP0 output and CMP4 negative input.
5 P3.0/AMP0M bidirectional GPIO P3.0, also AMP0 negative input used to amplify the bus current signal.
6 P3.1/AMP0P bidirectional GPIO P3.1, also AMP0 positive input used to amplify the bus current signal.
7 P3.2/AD5/VHALF bidirectional GPIO P3.2, also over-temperature signal input, ADC channel 5 input, and 1/2 VDD5 or 1/2 VREF reference output that needs an external 1uF capacitor.
8 P3.3/AD6/RXDS bidirectional GPIO P3.3, also ADC channel 6 input and UART data receive input after function transfer.
9 P3.4/AD7/TXDS bidirectional GPIO P3.4, also analog speed control input on ADC channel 7 and UART data transmit output after function transfer.
10 P3.5/VREF bidirectional GPIO P3.5, also ADC external reference voltage input or internal VREF output, which needs an external 1~4.7uF capacitor.
11 IOVCC power_in GPIO supply input at 35.5V with 110uF capacitor to ground, and IOVCC must not exceed VDD5.
12 P0.0/SDA bidirectional GPIO P0.0 with external interrupt 0 input, also I2C SDA open-drain output with optional 5K pull-up.
13 P0.1/TIM4/SCL bidirectional GPIO P0.1, also Timer4 capture mode input and I2C SCL clock open-drain output with optional 5K pull-up.
14 P0.4/NSS bidirectional GPIO P0.4, also SPI slave select port.
15 P0.5/TXD/MOSI bidirectional GPIO P0.5, also UART1 transmit before function transfer and SPI MOSI (master output or slave input).
16 P0.6/RXD/SCLK bidirectional GPIO P0.6, also UART1 receive before function transfer and SPI clock CLK.
17 P0.7/MISO/CMPXO/TIM2S bidirectional GPIO P0.7, also SPI MISO (master input or slave output), comparator output test pin, and Timer2 capture input or PWM output after function transfer.
18 P1.0/TIM2 bidirectional GPIO P1.0 with external interrupt 1 input, also Timer2 capture input or PWM output before function transfer.
19 P1.1/TIM3 bidirectional GPIO P1.1 with external interrupt 1 input, also Timer3 capture mode input.
20 VDRV power_in 6N Predriver supply at 718V with external 110uF capacitor.
21 VSS power_in Digital ground.
22 LU output 6N Predriver U-phase low-side PWM output.
23 LV output 6N Predriver V-phase low-side PWM output.
24 LW output 6N Predriver W-phase low-side PWM output.
25 VSU power_in 6N Predriver U-phase input used as the ground reference for U-phase high-side bootstrap.
26 HU output 6N Predriver U-phase high-side PWM output.
27 VBU power_in 6N Predriver U-phase high-side bootstrap supply.
28 VSV power_in 6N Predriver V-phase input used as the ground reference for V-phase high-side bootstrap.
29 HV output 6N Predriver V-phase high-side PWM output.
30 VBV power_in 6N Predriver V-phase high-side bootstrap supply.
31 VSW power_in 6N Predriver W-phase input used as the ground reference for W-phase high-side bootstrap.
32 HW output 6N Predriver W-phase high-side PWM output.
33 VBW power_in 6N Predriver W-phase high-side bootstrap supply.
34 NC unconnected NC pin, left floating.
35 VCC power_in Power input with range set by VCC_MODE: 524V in single high-voltage mode (VCC_MODE=0), or 536V in dual-supply mode; external 10uF or larger filter capacitor.
36 VSS power_in Digital ground.
37 VDD5 power_in Mid-voltage supply input or internal 5V LDO output set by VCC_MODE: LDO output 5V when VCC_MODE=0, external 35.5V input when VCC_MODE=1; external 14.7uF capacitor.
38 RSTN/FICEK input External reset input with internal pull-up and Schmitt trigger input, also FICE debug interface clock.
39 VDD18 power_out 1.8V LDO output supply, external 1~4.7uF capacitor.
40 P1.2/FICED bidirectional GPIO P1.2 with external interrupt 1 input, also FICE debug data port.
41 P1.3/HBIAS/CMP1PS bidirectional GPIO P1.3, also HALL bias supply connected internally to VDD5 through a switch, and CMP1 second-mode positive input.
42 P1.4/CMP0P/AD10/HALL0S bidirectional GPIO P1.4 with external interrupt 1 input and optional 5K pull-up, also BEMF0 positive input, ADC channel 10 input, and HALL0 logic input after function transfer.
43 P1.5/CMP0M bidirectional GPIO P1.5 with external interrupt 1 input and optional 5K pull-up, also BEMF0 negative input.
44 P1.6/CMP1P/AMP1P/AD9/HALL1S bidirectional GPIO P1.6 with external interrupt 1 input and optional 5K pull-up, also BEMF1 positive input, AMP1 positive input for phase current 1, ADC channel 9 input, and HALL1 logic input after function transfer.
45 P1.7/CMP1M/AMP1M bidirectional GPIO P1.7 with optional 5K pull-up, also BEMF1 negative input and AMP1 negative input.
46 P2.0/AD0/AMP1O bidirectional GPIO P2.0 with external interrupt 1 input, also ADC channel 0 input for amplified phase current 1 and AMP1 output.
47 P2.1/CMP2P/AMP2P/AD8/HALL2S bidirectional GPIO P2.1 with external interrupt 1 input and optional 5K pull-up, also BEMF2 positive input, AMP2 positive input for phase current 2, ADC channel 8 input, and HALL2 logic input after function transfer.
48 P2.2/CMP2M/AMP2M bidirectional GPIO P2.2 with external interrupt 1 input and optional 5K pull-up, also BEMF2 negative input and AMP2 negative input.

Key specifications

Parameter Value
Manufacturer Fortior Tech
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
工作时环境温度 TA -40 85 ℃ 60
工作时环境温度 (VCC≤12V) TA -40 105 ℃ VCC≤12V, Ivcc≤30mA 60
工作时结温 TJ -40 150 ℃ 60
储存温度 -65 150 ℃ 60
VCC 相对 VSS 的电压 VCC -0.3 36 V 60
VDD5/IOVCC 相对 VSS 的电压 VDD5 -0.3 5 6.5 V 60
VDRV 相对 VSS 的电压 VDRV -0.3 22 V 仅适用于 FU6861 60
VBU, VBV, VBW 浮动电压 VBU -0.3 180 V 仅适用于 FU6861 60
VDD18 VDD18 -0.3 1.85 2 V 60
RSTN、VCC_MODE、GPIO 相对 VSS 的电压 -0.3 V 60
VCC 工作电压 (单电源高压模式) VCC 5 24 V 单电源高压模式, VCC_MODE=0 61
VCC 工作电压 (双电源高压模式) VCC 5 36 V 双电源高压模式, VCC_MODE=1, VCC≥VDD5 61
VDD5 工作电压 VDD5 3 5.5 V VCC_MODE=1,VCC 与 VDD5 连接 61
IOVCC 工作电压 IOVCC 3 V 61
VDRV 工作电压 VDRV 7 18 V 61
VBU, VBV, VBW 浮动电压 VBU 180 V 61
VBU 相对 VSU 电压 VBU 18 V VBU 相对 VSU 电压,VBV 相对 VSV 电压,VBW 相对 VSW 电压 61
IVCC睡眠电流 IVCC 350 650 uA VCC_MODE=0 61
IVCC睡眠电流 IVCC 300 500 uA VCC_MODE=1,VCC=VDD5=5V 61
输出上升时间 15 30 nS 1nF Load, 从 10%上升至 90%时间 62
输出下降时间 15 30 nS 1nF Load, 从 90%下降至 10%时间 63
VOL输出低电压 VOL 0.7 V IOL=8mA,IOVCC=VDD5=5V 62
VICMR共模输入范围 VICMR 0 V 63
BEMF 内置电阻 5.4 6.8 8.2 kΩ 64
内部快时钟频率 23.5 24 24.5 MHz TA = -40℃~85℃,VCC = 5V~24V, VCC_MODE=0 64
WDT 时钟频率 29 32.8 37 kHz TA = -40℃~85℃,VCC = 5V~24V, VCC_MODE=0 64
复位低电平最小宽度 25 50 uS TA = -40℃~85℃,VCC = 5V~24V, VCC_MODE=0 64
VDD5 电压 VDD5 4.7 5 5.3 V VCC = 7V~30V, VCC_MODE=0 64
ΘJA 芯片节温相对环境温度 (LQFP48) ΘJA 52.4 ℃/W (1), (3) JEDEC 标准,2S2P PCB 65
ΘJA 芯片节温相对环境温度 (LQFP48) ΘJA 72.2 ℃/W (2), (3) JEDEC 标准,1S0P PCB 65
ΘJC 芯片节温相对封装表面温度 (LQFP48) ΘJC 17 ℃/W (2), (3) 65

CAD (KiCad official)

  • Symbol: FU6861L
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: fu6861l-etched.step / fu6861l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fu6861l.step / fu6861l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Fortior Tech datasheet (289 pp, sha256 d5f447c6f6bd72fd, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF