component
FU6861L
Public Made by Adomby adom
Fortior Tech Microcontroller Units (MCUs/MPUs/SOCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFU6861L
Fortior Tech · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
FU6861L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.3/AD1/AMP2O/CMP4P | bidirectional | GPIO P2.3 with external interrupt 1 input, also ADC channel 1 input for phase current 2 amplifier output, AMP2 output and CMP4 positive input. |
| 2 | P2.4/AD2 | bidirectional | GPIO P2.4 with external interrupt 1 input, also ADC channel 2 input for the bus voltage signal. |
| 3 | P2.6/CMP3M/DA0/AD11 | bidirectional | GPIO P2.6 with external interrupt 1 input, also overcurrent reference input and CMP3 negative input, internal DAC output without buffer, and ADC channel 11 input. |
| 4 | P2.7/AD4/CMP3P/AMP0O/CMP4M | bidirectional | GPIO P2.7 with external interrupt 1 input, also ADC channel 4 input for the amplified bus current, CMP3 positive input for overcurrent detection, AMP0 output and CMP4 negative input. |
| 5 | P3.0/AMP0M | bidirectional | GPIO P3.0, also AMP0 negative input used to amplify the bus current signal. |
| 6 | P3.1/AMP0P | bidirectional | GPIO P3.1, also AMP0 positive input used to amplify the bus current signal. |
| 7 | P3.2/AD5/VHALF | bidirectional | GPIO P3.2, also over-temperature signal input, ADC channel 5 input, and 1/2 VDD5 or 1/2 VREF reference output that needs an external 1uF capacitor. |
| 8 | P3.3/AD6/RXDS | bidirectional | GPIO P3.3, also ADC channel 6 input and UART data receive input after function transfer. |
| 9 | P3.4/AD7/TXDS | bidirectional | GPIO P3.4, also analog speed control input on ADC channel 7 and UART data transmit output after function transfer. |
| 10 | P3.5/VREF | bidirectional | GPIO P3.5, also ADC external reference voltage input or internal VREF output, which needs an external 1~4.7uF capacitor. |
| 11 | IOVCC | power_in | GPIO supply input at 3 |
| 12 | P0.0/SDA | bidirectional | GPIO P0.0 with external interrupt 0 input, also I2C SDA open-drain output with optional 5K pull-up. |
| 13 | P0.1/TIM4/SCL | bidirectional | GPIO P0.1, also Timer4 capture mode input and I2C SCL clock open-drain output with optional 5K pull-up. |
| 14 | P0.4/NSS | bidirectional | GPIO P0.4, also SPI slave select port. |
| 15 | P0.5/TXD/MOSI | bidirectional | GPIO P0.5, also UART1 transmit before function transfer and SPI MOSI (master output or slave input). |
| 16 | P0.6/RXD/SCLK | bidirectional | GPIO P0.6, also UART1 receive before function transfer and SPI clock CLK. |
| 17 | P0.7/MISO/CMPXO/TIM2S | bidirectional | GPIO P0.7, also SPI MISO (master input or slave output), comparator output test pin, and Timer2 capture input or PWM output after function transfer. |
| 18 | P1.0/TIM2 | bidirectional | GPIO P1.0 with external interrupt 1 input, also Timer2 capture input or PWM output before function transfer. |
| 19 | P1.1/TIM3 | bidirectional | GPIO P1.1 with external interrupt 1 input, also Timer3 capture mode input. |
| 20 | VDRV | power_in | 6N Predriver supply at 7 |
| 21 | VSS | power_in | Digital ground. |
| 22 | LU | output | 6N Predriver U-phase low-side PWM output. |
| 23 | LV | output | 6N Predriver V-phase low-side PWM output. |
| 24 | LW | output | 6N Predriver W-phase low-side PWM output. |
| 25 | VSU | power_in | 6N Predriver U-phase input used as the ground reference for U-phase high-side bootstrap. |
| 26 | HU | output | 6N Predriver U-phase high-side PWM output. |
| 27 | VBU | power_in | 6N Predriver U-phase high-side bootstrap supply. |
| 28 | VSV | power_in | 6N Predriver V-phase input used as the ground reference for V-phase high-side bootstrap. |
| 29 | HV | output | 6N Predriver V-phase high-side PWM output. |
| 30 | VBV | power_in | 6N Predriver V-phase high-side bootstrap supply. |
| 31 | VSW | power_in | 6N Predriver W-phase input used as the ground reference for W-phase high-side bootstrap. |
| 32 | HW | output | 6N Predriver W-phase high-side PWM output. |
| 33 | VBW | power_in | 6N Predriver W-phase high-side bootstrap supply. |
| 34 | NC | unconnected | NC pin, left floating. |
| 35 | VCC | power_in | Power input with range set by VCC_MODE: 5 |
| 36 | VSS | power_in | Digital ground. |
| 37 | VDD5 | power_in | Mid-voltage supply input or internal 5V LDO output set by VCC_MODE: LDO output 5V when VCC_MODE=0, external 3 |
| 38 | RSTN/FICEK | input | External reset input with internal pull-up and Schmitt trigger input, also FICE debug interface clock. |
| 39 | VDD18 | power_out | 1.8V LDO output supply, external 1~4.7uF capacitor. |
| 40 | P1.2/FICED | bidirectional | GPIO P1.2 with external interrupt 1 input, also FICE debug data port. |
| 41 | P1.3/HBIAS/CMP1PS | bidirectional | GPIO P1.3, also HALL bias supply connected internally to VDD5 through a switch, and CMP1 second-mode positive input. |
| 42 | P1.4/CMP0P/AD10/HALL0S | bidirectional | GPIO P1.4 with external interrupt 1 input and optional 5K pull-up, also BEMF0 positive input, ADC channel 10 input, and HALL0 logic input after function transfer. |
| 43 | P1.5/CMP0M | bidirectional | GPIO P1.5 with external interrupt 1 input and optional 5K pull-up, also BEMF0 negative input. |
| 44 | P1.6/CMP1P/AMP1P/AD9/HALL1S | bidirectional | GPIO P1.6 with external interrupt 1 input and optional 5K pull-up, also BEMF1 positive input, AMP1 positive input for phase current 1, ADC channel 9 input, and HALL1 logic input after function transfer. |
| 45 | P1.7/CMP1M/AMP1M | bidirectional | GPIO P1.7 with optional 5K pull-up, also BEMF1 negative input and AMP1 negative input. |
| 46 | P2.0/AD0/AMP1O | bidirectional | GPIO P2.0 with external interrupt 1 input, also ADC channel 0 input for amplified phase current 1 and AMP1 output. |
| 47 | P2.1/CMP2P/AMP2P/AD8/HALL2S | bidirectional | GPIO P2.1 with external interrupt 1 input and optional 5K pull-up, also BEMF2 positive input, AMP2 positive input for phase current 2, ADC channel 8 input, and HALL2 logic input after function transfer. |
| 48 | P2.2/CMP2M/AMP2M | bidirectional | GPIO P2.2 with external interrupt 1 input and optional 5K pull-up, also BEMF2 negative input and AMP2 negative input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作时环境温度 | TA | -40 | 85 | ℃ | 60 | ||
| 工作时环境温度 (VCC≤12V) | TA | -40 | 105 | ℃ | VCC≤12V, Ivcc≤30mA | 60 | |
| 工作时结温 | TJ | -40 | 150 | ℃ | 60 | ||
| 储存温度 | -65 | 150 | ℃ | 60 | |||
| VCC 相对 VSS 的电压 | VCC | -0.3 | 36 | V | 60 | ||
| VDD5/IOVCC 相对 VSS 的电压 | VDD5 | -0.3 | 5 | 6.5 | V | 60 | |
| VDRV 相对 VSS 的电压 | VDRV | -0.3 | 22 | V | 仅适用于 FU6861 | 60 | |
| VBU, VBV, VBW 浮动电压 | VBU | -0.3 | 180 | V | 仅适用于 FU6861 | 60 | |
| VDD18 | VDD18 | -0.3 | 1.85 | 2 | V | 60 | |
| RSTN、VCC_MODE、GPIO 相对 VSS 的电压 | -0.3 | V | 60 | ||||
| VCC 工作电压 (单电源高压模式) | VCC | 5 | 24 | V | 单电源高压模式, VCC_MODE=0 | 61 | |
| VCC 工作电压 (双电源高压模式) | VCC | 5 | 36 | V | 双电源高压模式, VCC_MODE=1, VCC≥VDD5 | 61 | |
| VDD5 工作电压 | VDD5 | 3 | 5.5 | V | VCC_MODE=1,VCC 与 VDD5 连接 | 61 | |
| IOVCC 工作电压 | IOVCC | 3 | V | 61 | |||
| VDRV 工作电压 | VDRV | 7 | 18 | V | 61 | ||
| VBU, VBV, VBW 浮动电压 | VBU | 180 | V | 61 | |||
| VBU 相对 VSU 电压 | VBU | 18 | V | VBU 相对 VSU 电压,VBV 相对 VSV 电压,VBW 相对 VSW 电压 | 61 | ||
| IVCC睡眠电流 | IVCC | 350 | 650 | uA | VCC_MODE=0 | 61 | |
| IVCC睡眠电流 | IVCC | 300 | 500 | uA | VCC_MODE=1,VCC=VDD5=5V | 61 | |
| 输出上升时间 | 15 | 30 | nS | 1nF Load, 从 10%上升至 90%时间 | 62 | ||
| 输出下降时间 | 15 | 30 | nS | 1nF Load, 从 90%下降至 10%时间 | 63 | ||
| VOL输出低电压 | VOL | 0.7 | V | IOL=8mA,IOVCC=VDD5=5V | 62 | ||
| VICMR共模输入范围 | VICMR | 0 | V | 63 | |||
| BEMF 内置电阻 | 5.4 | 6.8 | 8.2 | kΩ | 64 | ||
| 内部快时钟频率 | 23.5 | 24 | 24.5 | MHz | TA = -40℃~85℃,VCC = 5V~24V, VCC_MODE=0 | 64 | |
| WDT 时钟频率 | 29 | 32.8 | 37 | kHz | TA = -40℃~85℃,VCC = 5V~24V, VCC_MODE=0 | 64 | |
| 复位低电平最小宽度 | 25 | 50 | uS | TA = -40℃~85℃,VCC = 5V~24V, VCC_MODE=0 | 64 | ||
| VDD5 电压 | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V~30V, VCC_MODE=0 | 64 |
| ΘJA 芯片节温相对环境温度 (LQFP48) | ΘJA | 52.4 | ℃/W | (1), (3) JEDEC 标准,2S2P PCB | 65 | ||
| ΘJA 芯片节温相对环境温度 (LQFP48) | ΘJA | 72.2 | ℃/W | (2), (3) JEDEC 标准,1S0P PCB | 65 | ||
| ΘJC 芯片节温相对封装表面温度 (LQFP48) | ΘJC | 17 | ℃/W | (2), (3) | 65 |
CAD (KiCad official)
- Symbol:
FU6861L - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
fu6861l-etched.step/fu6861l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6861l.step/fu6861l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (289 pp, sha256
d5f447c6f6bd72fd, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).