component
FU6812L
Public Made by Adomby adom
Fortior Tech Motor Driver ICs, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
383e77f
FU6812L
Fortior Tech · Motor Driver ICs · LQFP-48(7x7)
FU6812L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.2/CMP2M/AMP2M | bidirectional | GPIO P2.2 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF2 negative input and op-amp 2 negative input (analog mode required before enabling AMP2). |
| 2 | P2.3/AD1/AMP2O/CMP4P | bidirectional | GPIO P2.3 with external interrupt 1 input; alternate functions are ADC channel 1 input for phase current 2 amplified signal, op-amp 2 output, and comparator 4 positive input. |
| 3 | P2.4/AD2 | bidirectional | GPIO P2.4 with external interrupt 1 input; alternate function is ADC channel 2 input for the bus voltage signal. |
| 4 | P2.5/AD3 | bidirectional | GPIO P2.5 with external interrupt 1 input; alternate function is ADC channel 3 input. |
| 5 | P2.6/CMP3M/DA0/AD11 | bidirectional | GPIO P2.6 with external interrupt 1 input; alternate functions are over-current reference input (comparator 3 negative input), internal DAC0 unbuffered voltage output (capacitive load only), and ADC channel 11 input. |
| 6 | P2.7/AD4/CMP3P/AMP0O/CMP4M | bidirectional | GPIO P2.7 with external interrupt 1 input; alternate functions are ADC channel 4 input for the amplified bus current, comparator 3 positive input for bus current over-current detection, op-amp 0 output, and comparator 4 negative input. |
| 7 | P3.0/AMP0M | bidirectional | GPIO P3.0; alternate function is op-amp 0 negative input for bus current amplification. |
| 8 | P3.1/AMP0P | bidirectional | GPIO P3.1; alternate function is op-amp 0 positive input for bus current amplification. |
| 9 | P3.2/AD5/VHALF | bidirectional | GPIO P3.2; alternate functions are over-temperature signal input, ADC channel 5 input, and 1/2 VDD5 or 1/2 VREF reference output (external 1uF capacitor). |
| 10 | P3.3/AD6/RXD2 | bidirectional | GPIO P3.3; alternate functions are ADC channel 6 input and UART2 receive input after function transfer. |
| 11 | P3.4/AD7/TXD2 | bidirectional | GPIO P3.4; alternate functions are analog speed control input (ADC channel 7) and UART2 transmit output after function transfer. |
| 12 | P3.5/VREF | bidirectional | GPIO P3.5; serves as ADC external reference voltage input or internal VREF output, with 1-4.7uF capacitor externally connected. |
| 13 | VSS | power_in | Digital ground. |
| 14 | IOVCC | power_in | GPIO supply input, 3-5.5V, with 1-10uF capacitor to ground; IOVCC must be ≤ VDD5, and only P3.7-P3.6, P0.x, P1.1-P1.0, P4.x and the six PWM outputs (H_DU-H_DW, L_DU-L_DW) are powered from IOVCC while other GPIOs remain on VDD5. |
| 15 | P3.6/HALL2 | bidirectional | GPIO P3.6; logic-level input for HALL2. |
| 16 | P3.7/HALL1 | bidirectional | GPIO P3.7; logic-level input for HALL1. |
| 17 | P0.0/SDA | bidirectional | GPIO P0.0 with external interrupt 0 input; I2C SDA open-drain output with optional ~5kΩ pull-up. |
| 18 | P0.1/TIM4/SCL | bidirectional | GPIO P0.1; alternate functions are Timer4 capture input and I2C SCL clock (open-drain output with optional ~5kΩ pull-up). |
| 19 | P0.2/HALL0 | bidirectional | GPIO P0.2; logic-level input for HALL0. |
| 20 | P0.3 | bidirectional | GPIO P0.3 (no alternate function listed in the pin table). |
| 21 | P0.4/NSS | bidirectional | GPIO P0.4; alternate function is SPI slave select (NSS). |
| 22 | P0.5/TXD/MOSI | bidirectional | GPIO P0.5; alternate functions are UART1 transmit (before function transfer) and SPI MOSI (master output / slave input). |
| 23 | P0.6/RXD/SCLK | bidirectional | GPIO P0.6; alternate functions are UART1 receive (before function transfer) and SPI clock SCLK. |
| 24 | P0.7/MISO/CMPXO/TIM2S | bidirectional | GPIO P0.7; alternate functions are SPI MISO (master input / slave output), comparator output test pin, and Timer2 capture input or PWM output after function transfer. |
| 25 | P1.0/TIM2 | bidirectional | GPIO P1.0 with external interrupt 1 input; alternate function is Timer2 capture input or PWM output (before function transfer). |
| 26 | P1.1/TIM3 | bidirectional | GPIO P1.1 with external interrupt 1 input; alternate function is Timer3 capture input. |
| 27 | P4.1/L_DX | bidirectional | GPIO P4.1; alternate function is PWM X-phase low-side output. |
| 28 | P4.2/H_DX | bidirectional | GPIO P4.2; alternate function is PWM X-phase high-side output. |
| 29 | L_DU | output | PWM U-phase low-side (bridge) output. |
| 30 | L_DV | output | PWM V-phase low-side (bridge) output. |
| 31 | L_DW | output | PWM W-phase low-side (bridge) output. |
| 32 | H_DU | output | PWM U-phase high-side (bridge) output. |
| 33 | H_DV | output | PWM V-phase high-side (bridge) output. |
| 34 | H_DW | output | PWM W-phase high-side (bridge) output. |
| 35 | VCC | power_in | Power input whose voltage range depends on VCC_MODE: 5-24V in single-supply high-voltage mode (VCC_MODE=0, VDD5 generated by internal LDO), or 3-5.5V from VDD5 with VCC shorted to VDD5 in low-voltage mode (VCC_MODE=1); add 10uF or larger filter capacitor. |
| 36 | VSS | power_in | Digital ground. |
| 37 | VDD5 | power_in | Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE (LDO output 5V when VCC_MODE=0; external 3-5.5V feed when VCC_MODE=1); add 1-4.7uF capacitor. |
| 38 | VCC_MODE | input | Power-mode control input selecting the VCC/VDD5 supply configuration described under the VCC pin. |
| 39 | RSTN/FICEK | input | External active-low reset input with internal pull-up and Schmitt-trigger input; alternate function is FICE debug interface clock. |
| 40 | VDD18 | power_out | 1.8V LDO output supply; requires 1-4.7uF capacitor. |
| 41 | P1.2/FICED | bidirectional | GPIO P1.2 with external interrupt 1 input; alternate function is FICE debug data port. |
| 42 | P1.3/HBIAS/CMP1PS | bidirectional | GPIO P1.3; alternate functions are HALL bias supply output (internally switched from VDD5) and comparator 1 second-mode positive input. |
| 43 | P1.4/CMP0P/AD10/HALL0S | bidirectional | GPIO P1.4 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF0 positive input, ADC channel 10 input, and HALL0 logic input after function transfer. |
| 44 | P1.5/CMP0M | bidirectional | GPIO P1.5 with external interrupt 1 input and optional ~5kΩ pull-up; alternate function is BEMF0 negative input. |
| 45 | P1.6/CMP1P/AMP1P/AD9/HALL1S | bidirectional | GPIO P1.6 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF1 positive input, op-amp 1 positive input for phase current 1, ADC channel 9 input, and HALL1 logic input after function transfer. |
| 46 | P1.7/CMP1M/AMP1M | bidirectional | GPIO P1.7 with optional ~5kΩ pull-up; alternate functions are BEMF1 negative input and op-amp 1 negative input. |
| 47 | P2.0/AD0/AMP1O | bidirectional | GPIO P2.0 with external interrupt 1 input; alternate functions are ADC channel 0 input for amplified phase current 1 and op-amp 1 output. |
| 48 | P2.1/CMP2P/AMP2P/AD8/HALL2S | bidirectional | GPIO P2.1 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF2 positive input, op-amp 2 positive input for phase current 2, ADC channel 8 input, and HALL2 logic input after function transfer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Power Supply Chip |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature | TA | -40 | 85 | ℃ | 60 | ||
| Operating ambient temperature (VCC≤12V, Ivcc≤30mA) | TA | -40 | 105 | ℃ | VCC≤12V, Ivcc≤30mA | 60 | |
| Operating ambient temperature (FU6812 only, single-supply low-voltage mode) | TA | -40 | 125 | ℃ | FU6812 only, single-supply low-voltage mode, VCC=VDD5=5V | 60 | |
| Operating junction temperature | TJ | -40 | 150 | ℃ | 60 | ||
| Storage temperature | -65 | 150 | ℃ | 60 | |||
| VCC voltage relative to VSS | VCC | -0.3 | 36 | V | 60 | ||
| VDD5/IOVCC voltage relative to VSS | VDD5/IOVCC | -0.3 | 5 | 6.5 | V | 60 | |
| VDD18 voltage | VDD18 | -0.3 | 1.85 | 2 | V | 60 | |
| RSTN, VCC_MODE, GPIO voltage relative to VSS | -0.3 | V | 60 | ||||
| VCC operating voltage, single-supply high-voltage mode | VCC | 5 | 24 | V | VCC_MODE=0 | 60 | |
| VCC operating voltage, dual-supply high-voltage mode | VCC | 5 | 36 | V | VCC_MODE=1, VCC≥VDD5, (2) | 61 | |
| VCC operating voltage, single-supply low-voltage mode | VCC | 3 | 5.5 | V | VCC_MODE=1, VCC connected to VDD5, (2) | 61 | |
| VDD5 operating voltage | VDD5 | 3 | 5.5 | V | VCC_MODE=1, VCC connected to VDD5, (2) | 61 | |
| IOVCC operating voltage | IOVCC | 3 | V | 61 | |||
| IVCC sleep current | IVCC | 100 | 250 | uA | VCC_MODE=0 | 61 | |
| IVCC sleep current | IVCC | 45 | 100 | uA | VCC_MODE=1, VCC=VDD5=5V | 61 | |
| VOL output low voltage | VOL | 0.7 | V | IOL=8mA, IOVCC=VDD5=5V | 62 | ||
| VICMR common-mode input range | VICMR | 0 | V | 63 | |||
| UGBW unity-gain bandwidth | UGBW | 6 | 10 | MHz | CL=40pF | 64 | |
| Op-amp slew rate | SR | 10 | 15 | V/uS | CL=40pF | 64 | |
| BEMF internal resistor | 5.4 | 6.8 | 8.2 | kΩ | 64 | ||
| Internal fast clock frequency | 23.5 | 24 | 24.5 | MHz | 64 | ||
| WDT clock frequency | 29 | 32.8 | 37 | kHz | 64 | ||
| Reset low-level minimum width | 25 | 50 | uS | 64 | |||
| VDD5 voltage (LDO output) | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V~30V, VCC_MODE=0 | 64 |
| Junction-to-ambient thermal resistance (LQFP48) | ƟJA | 52.4 | ℃/W | JEDEC standard, 2S2P PCB | 65 | ||
| Junction-to-ambient thermal resistance (LQFP48) | ƟJA | 72.2 | ℃/W | JEDEC standard, 1S0P PCB | 65 | ||
| Junction-to-case thermal resistance (LQFP48) | ƟJC | 17 | ℃/W | JEDEC standard, 1S0P PCB | 65 |
CAD (KiCad official)
- Symbol:
FU6812L - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
fu6812l-etched.step/fu6812l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6812l.step/fu6812l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (289 pp, sha256
d5f447c6f6bd72fd, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FU6812L
**Fortior Tech** · Motor Driver ICs · LQFP-48(7x7)
FU6812L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.2/CMP2M/AMP2M | bidirectional | GPIO P2.2 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF2 negative input and op-amp 2 negative input (analog mode required before enabling AMP2). |
| 2 | P2.3/AD1/AMP2O/CMP4P | bidirectional | GPIO P2.3 with external interrupt 1 input; alternate functions are ADC channel 1 input for phase current 2 amplified signal, op-amp 2 output, and comparator 4 positive input. |
| 3 | P2.4/AD2 | bidirectional | GPIO P2.4 with external interrupt 1 input; alternate function is ADC channel 2 input for the bus voltage signal. |
| 4 | P2.5/AD3 | bidirectional | GPIO P2.5 with external interrupt 1 input; alternate function is ADC channel 3 input. |
| 5 | P2.6/CMP3M/DA0/AD11 | bidirectional | GPIO P2.6 with external interrupt 1 input; alternate functions are over-current reference input (comparator 3 negative input), internal DAC0 unbuffered voltage output (capacitive load only), and ADC channel 11 input. |
| 6 | P2.7/AD4/CMP3P/AMP0O/CMP4M | bidirectional | GPIO P2.7 with external interrupt 1 input; alternate functions are ADC channel 4 input for the amplified bus current, comparator 3 positive input for bus current over-current detection, op-amp 0 output, and comparator 4 negative input. |
| 7 | P3.0/AMP0M | bidirectional | GPIO P3.0; alternate function is op-amp 0 negative input for bus current amplification. |
| 8 | P3.1/AMP0P | bidirectional | GPIO P3.1; alternate function is op-amp 0 positive input for bus current amplification. |
| 9 | P3.2/AD5/VHALF | bidirectional | GPIO P3.2; alternate functions are over-temperature signal input, ADC channel 5 input, and 1/2 VDD5 or 1/2 VREF reference output (external 1uF capacitor). |
| 10 | P3.3/AD6/RXD2 | bidirectional | GPIO P3.3; alternate functions are ADC channel 6 input and UART2 receive input after function transfer. |
| 11 | P3.4/AD7/TXD2 | bidirectional | GPIO P3.4; alternate functions are analog speed control input (ADC channel 7) and UART2 transmit output after function transfer. |
| 12 | P3.5/VREF | bidirectional | GPIO P3.5; serves as ADC external reference voltage input or internal VREF output, with 1-4.7uF capacitor externally connected. |
| 13 | VSS | power_in | Digital ground. |
| 14 | IOVCC | power_in | GPIO supply input, 3-5.5V, with 1-10uF capacitor to ground; IOVCC must be ≤ VDD5, and only P3.7-P3.6, P0.x, P1.1-P1.0, P4.x and the six PWM outputs (H_DU-H_DW, L_DU-L_DW) are powered from IOVCC while other GPIOs remain on VDD5. |
| 15 | P3.6/HALL2 | bidirectional | GPIO P3.6; logic-level input for HALL2. |
| 16 | P3.7/HALL1 | bidirectional | GPIO P3.7; logic-level input for HALL1. |
| 17 | P0.0/SDA | bidirectional | GPIO P0.0 with external interrupt 0 input; I2C SDA open-drain output with optional ~5kΩ pull-up. |
| 18 | P0.1/TIM4/SCL | bidirectional | GPIO P0.1; alternate functions are Timer4 capture input and I2C SCL clock (open-drain output with optional ~5kΩ pull-up). |
| 19 | P0.2/HALL0 | bidirectional | GPIO P0.2; logic-level input for HALL0. |
| 20 | P0.3 | bidirectional | GPIO P0.3 (no alternate function listed in the pin table). |
| 21 | P0.4/NSS | bidirectional | GPIO P0.4; alternate function is SPI slave select (NSS). |
| 22 | P0.5/TXD/MOSI | bidirectional | GPIO P0.5; alternate functions are UART1 transmit (before function transfer) and SPI MOSI (master output / slave input). |
| 23 | P0.6/RXD/SCLK | bidirectional | GPIO P0.6; alternate functions are UART1 receive (before function transfer) and SPI clock SCLK. |
| 24 | P0.7/MISO/CMPXO/TIM2S | bidirectional | GPIO P0.7; alternate functions are SPI MISO (master input / slave output), comparator output test pin, and Timer2 capture input or PWM output after function transfer. |
| 25 | P1.0/TIM2 | bidirectional | GPIO P1.0 with external interrupt 1 input; alternate function is Timer2 capture input or PWM output (before function transfer). |
| 26 | P1.1/TIM3 | bidirectional | GPIO P1.1 with external interrupt 1 input; alternate function is Timer3 capture input. |
| 27 | P4.1/L_DX | bidirectional | GPIO P4.1; alternate function is PWM X-phase low-side output. |
| 28 | P4.2/H_DX | bidirectional | GPIO P4.2; alternate function is PWM X-phase high-side output. |
| 29 | L_DU | output | PWM U-phase low-side (bridge) output. |
| 30 | L_DV | output | PWM V-phase low-side (bridge) output. |
| 31 | L_DW | output | PWM W-phase low-side (bridge) output. |
| 32 | H_DU | output | PWM U-phase high-side (bridge) output. |
| 33 | H_DV | output | PWM V-phase high-side (bridge) output. |
| 34 | H_DW | output | PWM W-phase high-side (bridge) output. |
| 35 | VCC | power_in | Power input whose voltage range depends on VCC_MODE: 5-24V in single-supply high-voltage mode (VCC_MODE=0, VDD5 generated by internal LDO), or 3-5.5V from VDD5 with VCC shorted to VDD5 in low-voltage mode (VCC_MODE=1); add 10uF or larger filter capacitor. |
| 36 | VSS | power_in | Digital ground. |
| 37 | VDD5 | power_in | Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE (LDO output 5V when VCC_MODE=0; external 3-5.5V feed when VCC_MODE=1); add 1-4.7uF capacitor. |
| 38 | VCC_MODE | input | Power-mode control input selecting the VCC/VDD5 supply configuration described under the VCC pin. |
| 39 | RSTN/FICEK | input | External active-low reset input with internal pull-up and Schmitt-trigger input; alternate function is FICE debug interface clock. |
| 40 | VDD18 | power_out | 1.8V LDO output supply; requires 1-4.7uF capacitor. |
| 41 | P1.2/FICED | bidirectional | GPIO P1.2 with external interrupt 1 input; alternate function is FICE debug data port. |
| 42 | P1.3/HBIAS/CMP1PS | bidirectional | GPIO P1.3; alternate functions are HALL bias supply output (internally switched from VDD5) and comparator 1 second-mode positive input. |
| 43 | P1.4/CMP0P/AD10/HALL0S | bidirectional | GPIO P1.4 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF0 positive input, ADC channel 10 input, and HALL0 logic input after function transfer. |
| 44 | P1.5/CMP0M | bidirectional | GPIO P1.5 with external interrupt 1 input and optional ~5kΩ pull-up; alternate function is BEMF0 negative input. |
| 45 | P1.6/CMP1P/AMP1P/AD9/HALL1S | bidirectional | GPIO P1.6 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF1 positive input, op-amp 1 positive input for phase current 1, ADC channel 9 input, and HALL1 logic input after function transfer. |
| 46 | P1.7/CMP1M/AMP1M | bidirectional | GPIO P1.7 with optional ~5kΩ pull-up; alternate functions are BEMF1 negative input and op-amp 1 negative input. |
| 47 | P2.0/AD0/AMP1O | bidirectional | GPIO P2.0 with external interrupt 1 input; alternate functions are ADC channel 0 input for amplified phase current 1 and op-amp 1 output. |
| 48 | P2.1/CMP2P/AMP2P/AD8/HALL2S | bidirectional | GPIO P2.1 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF2 positive input, op-amp 2 positive input for phase current 2, ADC channel 8 input, and HALL2 logic input after function transfer. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Power Supply Chip |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating ambient temperature | TA | -40 | | 85 | ℃ | | 60 |
| Operating ambient temperature (VCC≤12V, Ivcc≤30mA) | TA | -40 | | 105 | ℃ | VCC≤12V, Ivcc≤30mA | 60 |
| Operating ambient temperature (FU6812 only, single-supply low-voltage mode) | TA | -40 | | 125 | ℃ | FU6812 only, single-supply low-voltage mode, VCC=VDD5=5V | 60 |
| Operating junction temperature | TJ | -40 | | 150 | ℃ | | 60 |
| Storage temperature | | -65 | | 150 | ℃ | | 60 |
| VCC voltage relative to VSS | VCC | -0.3 | | 36 | V | | 60 |
| VDD5/IOVCC voltage relative to VSS | VDD5/IOVCC | -0.3 | 5 | 6.5 | V | | 60 |
| VDD18 voltage | VDD18 | -0.3 | 1.85 | 2 | V | | 60 |
| RSTN, VCC_MODE, GPIO voltage relative to VSS | | -0.3 | | | V | | 60 |
| VCC operating voltage, single-supply high-voltage mode | VCC | 5 | | 24 | V | VCC_MODE=0 | 60 |
| VCC operating voltage, dual-supply high-voltage mode | VCC | 5 | | 36 | V | VCC_MODE=1, VCC≥VDD5, (2) | 61 |
| VCC operating voltage, single-supply low-voltage mode | VCC | 3 | | 5.5 | V | VCC_MODE=1, VCC connected to VDD5, (2) | 61 |
| VDD5 operating voltage | VDD5 | 3 | | 5.5 | V | VCC_MODE=1, VCC connected to VDD5, (2) | 61 |
| IOVCC operating voltage | IOVCC | 3 | | | V | | 61 |
| IVCC sleep current | IVCC | | 100 | 250 | uA | VCC_MODE=0 | 61 |
| IVCC sleep current | IVCC | | 45 | 100 | uA | VCC_MODE=1, VCC=VDD5=5V | 61 |
| VOL output low voltage | VOL | | | 0.7 | V | IOL=8mA, IOVCC=VDD5=5V | 62 |
| VICMR common-mode input range | VICMR | 0 | | | V | | 63 |
| UGBW unity-gain bandwidth | UGBW | 6 | 10 | | MHz | CL=40pF | 64 |
| Op-amp slew rate | SR | 10 | 15 | | V/uS | CL=40pF | 64 |
| BEMF internal resistor | | 5.4 | 6.8 | 8.2 | kΩ | | 64 |
| Internal fast clock frequency | | 23.5 | 24 | 24.5 | MHz | | 64 |
| WDT clock frequency | | 29 | 32.8 | 37 | kHz | | 64 |
| Reset low-level minimum width | | | 25 | 50 | uS | | 64 |
| VDD5 voltage (LDO output) | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V~30V, VCC_MODE=0 | 64 |
| Junction-to-ambient thermal resistance (LQFP48) | ƟJA | | 52.4 | | ℃/W | JEDEC standard, 2S2P PCB | 65 |
| Junction-to-ambient thermal resistance (LQFP48) | ƟJA | | 72.2 | | ℃/W | JEDEC standard, 1S0P PCB | 65 |
| Junction-to-case thermal resistance (LQFP48) | ƟJC | | 17 | | ℃/W | JEDEC standard, 1S0P PCB | 65 |
## CAD (KiCad official)
- Symbol: `FU6812L`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `fu6812l-etched.step` / `fu6812l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fu6812l.step` / `fu6812l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Fortior Tech datasheet](docs/fu6812l-datasheet.pdf) (289 pp, sha256 `d5f447c6f6bd72fd`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fu6812l-datasheet.pdf)