main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers fu6812l: viewers · Ray
fu6812l-etched.glb Publish 0.1.0 · Ray
fu6812l-etched.step fu6812l: factory component page (tier=lcsc) · Ray
fu6812l-hero.glb fu6812l: hero GLB from the etched model (keeps the MPN mark) · Ray
fu6812l-hero.overlay.json Publish 0.1.0 · Ray
fu6812l.glb Publish 0.1.0 · Ray
fu6812l.kicad_mod Publish 0.1.0 · Ray
fu6812l.kicad_sym Publish 0.1.0 · Ray
fu6812l.lbr Publish 0.1.0 · Ray
fu6812l.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 48 pins · Ray

FU6812L

Fortior Tech · Motor Driver ICs · LQFP-48(7x7)

FU6812L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P2.2/CMP2M/AMP2M bidirectional GPIO P2.2 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF2 negative input and op-amp 2 negative input (analog mode required before enabling AMP2).
2 P2.3/AD1/AMP2O/CMP4P bidirectional GPIO P2.3 with external interrupt 1 input; alternate functions are ADC channel 1 input for phase current 2 amplified signal, op-amp 2 output, and comparator 4 positive input.
3 P2.4/AD2 bidirectional GPIO P2.4 with external interrupt 1 input; alternate function is ADC channel 2 input for the bus voltage signal.
4 P2.5/AD3 bidirectional GPIO P2.5 with external interrupt 1 input; alternate function is ADC channel 3 input.
5 P2.6/CMP3M/DA0/AD11 bidirectional GPIO P2.6 with external interrupt 1 input; alternate functions are over-current reference input (comparator 3 negative input), internal DAC0 unbuffered voltage output (capacitive load only), and ADC channel 11 input.
6 P2.7/AD4/CMP3P/AMP0O/CMP4M bidirectional GPIO P2.7 with external interrupt 1 input; alternate functions are ADC channel 4 input for the amplified bus current, comparator 3 positive input for bus current over-current detection, op-amp 0 output, and comparator 4 negative input.
7 P3.0/AMP0M bidirectional GPIO P3.0; alternate function is op-amp 0 negative input for bus current amplification.
8 P3.1/AMP0P bidirectional GPIO P3.1; alternate function is op-amp 0 positive input for bus current amplification.
9 P3.2/AD5/VHALF bidirectional GPIO P3.2; alternate functions are over-temperature signal input, ADC channel 5 input, and 1/2 VDD5 or 1/2 VREF reference output (external 1uF capacitor).
10 P3.3/AD6/RXD2 bidirectional GPIO P3.3; alternate functions are ADC channel 6 input and UART2 receive input after function transfer.
11 P3.4/AD7/TXD2 bidirectional GPIO P3.4; alternate functions are analog speed control input (ADC channel 7) and UART2 transmit output after function transfer.
12 P3.5/VREF bidirectional GPIO P3.5; serves as ADC external reference voltage input or internal VREF output, with 1-4.7uF capacitor externally connected.
13 VSS power_in Digital ground.
14 IOVCC power_in GPIO supply input, 3-5.5V, with 1-10uF capacitor to ground; IOVCC must be ≤ VDD5, and only P3.7-P3.6, P0.x, P1.1-P1.0, P4.x and the six PWM outputs (H_DU-H_DW, L_DU-L_DW) are powered from IOVCC while other GPIOs remain on VDD5.
15 P3.6/HALL2 bidirectional GPIO P3.6; logic-level input for HALL2.
16 P3.7/HALL1 bidirectional GPIO P3.7; logic-level input for HALL1.
17 P0.0/SDA bidirectional GPIO P0.0 with external interrupt 0 input; I2C SDA open-drain output with optional ~5kΩ pull-up.
18 P0.1/TIM4/SCL bidirectional GPIO P0.1; alternate functions are Timer4 capture input and I2C SCL clock (open-drain output with optional ~5kΩ pull-up).
19 P0.2/HALL0 bidirectional GPIO P0.2; logic-level input for HALL0.
20 P0.3 bidirectional GPIO P0.3 (no alternate function listed in the pin table).
21 P0.4/NSS bidirectional GPIO P0.4; alternate function is SPI slave select (NSS).
22 P0.5/TXD/MOSI bidirectional GPIO P0.5; alternate functions are UART1 transmit (before function transfer) and SPI MOSI (master output / slave input).
23 P0.6/RXD/SCLK bidirectional GPIO P0.6; alternate functions are UART1 receive (before function transfer) and SPI clock SCLK.
24 P0.7/MISO/CMPXO/TIM2S bidirectional GPIO P0.7; alternate functions are SPI MISO (master input / slave output), comparator output test pin, and Timer2 capture input or PWM output after function transfer.
25 P1.0/TIM2 bidirectional GPIO P1.0 with external interrupt 1 input; alternate function is Timer2 capture input or PWM output (before function transfer).
26 P1.1/TIM3 bidirectional GPIO P1.1 with external interrupt 1 input; alternate function is Timer3 capture input.
27 P4.1/L_DX bidirectional GPIO P4.1; alternate function is PWM X-phase low-side output.
28 P4.2/H_DX bidirectional GPIO P4.2; alternate function is PWM X-phase high-side output.
29 L_DU output PWM U-phase low-side (bridge) output.
30 L_DV output PWM V-phase low-side (bridge) output.
31 L_DW output PWM W-phase low-side (bridge) output.
32 H_DU output PWM U-phase high-side (bridge) output.
33 H_DV output PWM V-phase high-side (bridge) output.
34 H_DW output PWM W-phase high-side (bridge) output.
35 VCC power_in Power input whose voltage range depends on VCC_MODE: 5-24V in single-supply high-voltage mode (VCC_MODE=0, VDD5 generated by internal LDO), or 3-5.5V from VDD5 with VCC shorted to VDD5 in low-voltage mode (VCC_MODE=1); add 10uF or larger filter capacitor.
36 VSS power_in Digital ground.
37 VDD5 power_in Medium-voltage supply input or internal 5V LDO output depending on VCC_MODE (LDO output 5V when VCC_MODE=0; external 3-5.5V feed when VCC_MODE=1); add 1-4.7uF capacitor.
38 VCC_MODE input Power-mode control input selecting the VCC/VDD5 supply configuration described under the VCC pin.
39 RSTN/FICEK input External active-low reset input with internal pull-up and Schmitt-trigger input; alternate function is FICE debug interface clock.
40 VDD18 power_out 1.8V LDO output supply; requires 1-4.7uF capacitor.
41 P1.2/FICED bidirectional GPIO P1.2 with external interrupt 1 input; alternate function is FICE debug data port.
42 P1.3/HBIAS/CMP1PS bidirectional GPIO P1.3; alternate functions are HALL bias supply output (internally switched from VDD5) and comparator 1 second-mode positive input.
43 P1.4/CMP0P/AD10/HALL0S bidirectional GPIO P1.4 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF0 positive input, ADC channel 10 input, and HALL0 logic input after function transfer.
44 P1.5/CMP0M bidirectional GPIO P1.5 with external interrupt 1 input and optional ~5kΩ pull-up; alternate function is BEMF0 negative input.
45 P1.6/CMP1P/AMP1P/AD9/HALL1S bidirectional GPIO P1.6 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF1 positive input, op-amp 1 positive input for phase current 1, ADC channel 9 input, and HALL1 logic input after function transfer.
46 P1.7/CMP1M/AMP1M bidirectional GPIO P1.7 with optional ~5kΩ pull-up; alternate functions are BEMF1 negative input and op-amp 1 negative input.
47 P2.0/AD0/AMP1O bidirectional GPIO P2.0 with external interrupt 1 input; alternate functions are ADC channel 0 input for amplified phase current 1 and op-amp 1 output.
48 P2.1/CMP2P/AMP2P/AD8/HALL2S bidirectional GPIO P2.1 with external interrupt 1 input and optional ~5kΩ pull-up; alternate functions are BEMF2 positive input, op-amp 2 positive input for phase current 2, ADC channel 8 input, and HALL2 logic input after function transfer.

Key specifications

Parameter Value
Manufacturer Fortior Tech
Package LQFP-48(7x7)
Category Power Supply Chip
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating ambient temperature TA -40 85 ℃ 60
Operating ambient temperature (VCC≤12V, Ivcc≤30mA) TA -40 105 ℃ VCC≤12V, Ivcc≤30mA 60
Operating ambient temperature (FU6812 only, single-supply low-voltage mode) TA -40 125 ℃ FU6812 only, single-supply low-voltage mode, VCC=VDD5=5V 60
Operating junction temperature TJ -40 150 ℃ 60
Storage temperature -65 150 ℃ 60
VCC voltage relative to VSS VCC -0.3 36 V 60
VDD5/IOVCC voltage relative to VSS VDD5/IOVCC -0.3 5 6.5 V 60
VDD18 voltage VDD18 -0.3 1.85 2 V 60
RSTN, VCC_MODE, GPIO voltage relative to VSS -0.3 V 60
VCC operating voltage, single-supply high-voltage mode VCC 5 24 V VCC_MODE=0 60
VCC operating voltage, dual-supply high-voltage mode VCC 5 36 V VCC_MODE=1, VCC≥VDD5, (2) 61
VCC operating voltage, single-supply low-voltage mode VCC 3 5.5 V VCC_MODE=1, VCC connected to VDD5, (2) 61
VDD5 operating voltage VDD5 3 5.5 V VCC_MODE=1, VCC connected to VDD5, (2) 61
IOVCC operating voltage IOVCC 3 V 61
IVCC sleep current IVCC 100 250 uA VCC_MODE=0 61
IVCC sleep current IVCC 45 100 uA VCC_MODE=1, VCC=VDD5=5V 61
VOL output low voltage VOL 0.7 V IOL=8mA, IOVCC=VDD5=5V 62
VICMR common-mode input range VICMR 0 V 63
UGBW unity-gain bandwidth UGBW 6 10 MHz CL=40pF 64
Op-amp slew rate SR 10 15 V/uS CL=40pF 64
BEMF internal resistor 5.4 6.8 8.2 kΩ 64
Internal fast clock frequency 23.5 24 24.5 MHz 64
WDT clock frequency 29 32.8 37 kHz 64
Reset low-level minimum width 25 50 uS 64
VDD5 voltage (LDO output) VDD5 4.7 5 5.3 V VCC = 7V~30V, VCC_MODE=0 64
Junction-to-ambient thermal resistance (LQFP48) ƟJA 52.4 ℃/W JEDEC standard, 2S2P PCB 65
Junction-to-ambient thermal resistance (LQFP48) ƟJA 72.2 ℃/W JEDEC standard, 1S0P PCB 65
Junction-to-case thermal resistance (LQFP48) ƟJC 17 ℃/W JEDEC standard, 1S0P PCB 65

CAD (KiCad official)

  • Symbol: FU6812L
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: fu6812l-etched.step / fu6812l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fu6812l.step / fu6812l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Fortior Tech datasheet (289 pp, sha256 d5f447c6f6bd72fd, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF