component
FU6562L
Public Made by Adomby adom
Fortior Tech Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
b994c88
FU6562L
Fortior Tech · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
FU6562L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.1/C2P/A2P/AD8/HAL2S | bidirectional | GPIO P2.1; alternate functions are CMP2 positive input, AMP2 positive input, ADC channel 8 input, and Hall-IC2 logic-level input after function transfer. |
| 2 | P2.2/C2M/A2M | bidirectional | GPIO P2.2; alternate functions are CMP2 negative input and AMP2 negative input. |
| 3 | P2.4/AD2 | bidirectional | GPIO P2.4; ADC channel 2 input, which can be used for bus voltage sampling. |
| 4 | P2.6/C3M/DA0/AD11 | bidirectional | GPIO P2.6; alternate functions are CMP3 negative input, DAC0 output (no buffer, capacitive load only per DAC note), and ADC channel 11 input. |
| 5 | P2.7/AD4/C3P/A0O/C4M | bidirectional | GPIO P2.7; ADC channel 4 input used for bus current sampling, also CMP3 positive input, AMP0 output and CMP4 negative input. |
| 6 | P3.0/A0M | bidirectional | GPIO P3.0; AMP0 negative input. |
| 7 | P3.1/A0P | bidirectional | GPIO P3.1; AMP0 positive input. |
| 8 | P3.3/AD6 | bidirectional | GPIO P3.3; ADC channel 6 input. |
| 9 | P3.4/AD7/C3PS/C4MS | bidirectional | GPIO P3.4; ADC channel 7 input, and when AMP_CR0[CP_EN]=1 the AMP0 output (P2.7) is routed through an internal 50k resistor to P3.4, which requires an external 1μF capacitor for bus average current sampling; also CMP3 positive and CMP4 negative inputs after function transfer. |
| 10 | P3.5/VREF | bidirectional | ADC external reference voltage input or internal VREF output; externally connect R + C in series to VSS with R = 22Ω and C = 1μF to 4.7μF. |
| 11 | P0.1/DBG/TIM4/TIM3S/RXD2S | bidirectional | GPIO P0.1 with external interrupt INT0 capability; serves as Debug port, Timer4 (before transfer), Timer3 (after transfer), and UART2 RXD (two-wire) or TXD output/RXD input (single-wire) after transfer. |
| 12 | P0.5/TXD/SCLK | bidirectional | GPIO P0.5 with external interrupt INT0 capability; UART1 TXD output and SPI clock SCLK. |
| 13 | P0.6/RXD/MOSI | bidirectional | GPIO P0.6 with external interrupt INT0 capability; UART1 RXD input in two-wire mode or TXD output in single-wire mode, and SPI MOSI (master output / slave input). |
| 14 | P0.7/MISO/TIM2S/QEPA | bidirectional | GPIO P0.7; SPI MISO (master input / slave output), Timer2 input or output after transfer, and QEP encoder A input. |
| 15 | COM | power_in | DRV ground pin for the 6N pre-driver section. |
| 16 | LW | output | 6N pre-driver W-phase low-side bridge PWM output. |
| 17 | LV | output | 6N pre-driver V-phase low-side bridge PWM output. |
| 18 | LU | output | 6N pre-driver U-phase low-side bridge PWM output. |
| 19 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 20 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 21 | VBU | power_in | 6N pre-driver U-phase high-side bootstrap supply pin. |
| 22 | HU | output | 6N pre-driver U-phase high-side bridge PWM output. |
| 23 | VSU | power_in | 6N pre-driver U-phase input used as the ground reference for the U-phase high-side bootstrap. |
| 24 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 25 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 26 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 27 | VSV | power_in | 6N pre-driver V-phase input used as the ground reference for the V-phase high-side bootstrap. |
| 28 | HV | output | 6N pre-driver V-phase high-side bridge PWM output. |
| 29 | VBV | power_in | 6N pre-driver V-phase high-side bootstrap supply pin. |
| 30 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 31 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 32 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 33 | VSW | power_in | 6N pre-driver W-phase input used as the ground reference for the W-phase high-side bootstrap. |
| 34 | HW | output | 6N pre-driver W-phase high-side bridge PWM output. |
| 35 | VBW | power_in | 6N pre-driver W-phase high-side bootstrap supply pin. |
| 36 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 37 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 38 | VCC | power_in | VCC supply pin; connect an external 1μF to 4.7μF capacitor. |
| 39 | VSS | power_in | Power ground pin. |
| 40 | VDD5 | power_in | 5V supply input VDD5 that cannot output power; connect an external 1μF to 4.7μF capacitor. |
| 41 | P4.7/TIM3S2/RXD2S2/RSTN/FICEK | input | GPIO P4.7 input with alternate functions Timer3 input, UART2 RXD input, external active-low reset input RSTN with internal pull-up, and FICE clock; the reset pin is low-active and must be low for more than 50μs to reset the chip. |
| 42 | P4.5/AD14 | bidirectional | GPIO P4.5 with external interrupt INT1 capability; ADC channel 14 input. |
| 43 | P1.2/TIM4S2/TXD2S2/FICED | bidirectional | GPIO P1.2 with external interrupt INT1 capability; Timer4 input or output, UART2 TXD output after transfer, and FICE data port. |
| 44 | P1.3/HBIAS/C1PS/A3O/AD12 | bidirectional | GPIO P1.3 with external interrupt INT1 capability; HALL bias supply internally switched to VDD5, also CMP1 positive input after transfer, AMP3 output and ADC channel 12 input. |
| 45 | P1.4/C0P/A3M/AD10/HAL0S | bidirectional | GPIO P1.4 with external interrupt INT1 capability; CMP0 positive input, AMP3 negative input, ADC channel 10 input, and Hall-IC0 logic-level input after transfer. |
| 46 | P1.5/C0M/C2PS/A3P/AD13 | bidirectional | GPIO P1.5 with external interrupt INT1 capability; CMP0 negative input, CMP2 positive input after transfer, AMP3 positive input and ADC channel 13 input. |
| 47 | P1.6/C1P/A1P/AD9/HAL1S | bidirectional | GPIO P1.6 with external interrupt INT1 capability; CMP1 positive input, AMP1 positive input, ADC channel 9 input, and Hall-IC1 logic-level input after transfer. |
| 48 | P1.7/C1M/A1M | bidirectional | GPIO P1.7 with external interrupt INT1 capability; CMP1 negative input and AMP1 negative input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作时结温 | TJ | -40 | 125 | ℃ | 81 | ||
| 储存温度 | Tstg | -55 | 125 | ℃ | 81 | ||
| VCC 相对 VSS 的电压 | VCC | -0.3 | 22 | V | 81 | ||
| VDD5 相对 VSS 的电压 | VDD5 | -0.3 | 6.5 | V | 81 | ||
| 高侧浮动电压 | VBU,BV,BW | -0.3 | 625 | V | 81 | ||
| 低侧供电电压 | -0.3 | V | 81 | ||||
| 低侧输出电压 | VLU,LV,LW | -0.3 | V | 81 | |||
| RSTN、GPIO 相对 VSS 的电压 | -0.3 | V | 81 | ||||
| VCC 工作电压 | VCC | 7 | 20 | V | 83 | ||
| VDD5 工作电压 | VDD5 | 3 | 5.5 | V | 83 | ||
| 工作时环境温度 | TA | -40 | 85 | ℃ | 83 | ||
| 工作时环境温度 | TA | 105 | ℃ | VCC ≤ 15V & Ivcc ≤ 30mA | 83 | ||
| Ivcc工作电流 | Ivcc | 12 | mA | VCC = 15V | 83 | ||
| Ivcc待机电流 | Ivcc | 5 | mA | VCC = 15V | 83 | ||
| Ivcc睡眠电流 | Ivcc | 180 | μA | VCC = 15V | 83 | ||
| 高电平输出峰值电流 | 0.21 | A | 93 | ||||
| 低电平输出峰值电流 | 0.36 | A | 93 | ||||
| VCC 供电电压 | VCC | 12 | 20 | V | 93 | ||
| VCC 静态电流 | 0.14 | mA | 93 | ||||
| 高侧浮动电压 | VBU,BV,BW | 600 | V | 93 | |||
| 高侧浮动偏移电压 | VSU,SV,SW | -20 | V | VBU,BV,BW | 93 | ||
| VCC 欠压保护开启电压 | 8.1 | 9 | 9.9 | V | 93 | ||
| VCC 欠压保护关断电压 | 7.5 | 8.4 | 9.3 | V | 93 | ||
| VCC 欠压保护迟滞电压 | 0.4 | 0.6 | V | 93 | |||
| 输出上升时间 | 90 | ns | 1nF 负载,从 10%上升至 90%时间 | 93 | |||
| 输出下降时间 | 50 | ns | 1nF 负载,从 90%下降至 10%时间 | 93 | |||
| 死区时间 | DT | 500 | ns | 93 | |||
| 输出上升时间 | 15 | ns | 50pF 负载,从 10%上升至 90%时间,TA = 25℃ | 87 | |||
| 输出下降时间 | 13 | ns | 50pF 负载,从 90%下降至 10%时间,TA = 25℃ | 87 | |||
| 上拉电阻[2] | 33 | kΩ | VDD5 = 5V | 87 | |||
| VREF | VREF | 4.5 | V | VREF_CR[VREFVSEL] = 00 | 96 | ||
| VREF | VREF | 5 | V | VREF_CR[VREFVSEL] = 01 | 96 | ||
| VREF | VREF | 3 | V | VREF_CR[VREFVSEL] = 10 | 96 | ||
| VREF | VREF | 4 | V | VREF_CR[VREFVSEL] = 11 | 96 | ||
| VDD5 电压 | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V ~ 20V | 99 |
| RSTN 复位低电平最小时间 | 50 | μs | 98 | ||||
| VDD5 低电压复位电压 | 2.8 | 3 | 3.2 | V | 复位电压选择 LVR = 3.0V | 98 | |
| 系统时钟频率 | 23.5 | 24 | 24.5 | MHz | 98 | ||
| 低速时钟频率 | 29 | 32.8 | 37 | kHz | 98 | ||
| BEMF 内置电阻 | 5.4 | 6.8 | 8.2 | kΩ | 98 | ||
| VICMR共模输入范围 | VICMR | 0 | V | 97 | |||
| VOS运放的失配电压 | VOS | 5 | 10 | mV | TA = 25℃ | 97 | |
| AOL开环增益 | AOL | 80 | dB | RL = 100kΩ | 97 | ||
| UGBW 单位增益带宽 | UGBW | 6 | 10 | MHz | CL = 40pF | 97 | |
| SR 运放的摆率 | SR | 10 | 15 | V/μs | CL = 40pF | 97 | |
| 运放放大倍数 | 1.88 | 2 | 2.12 | - | AMP_CR1[AMP0_GAIN] = 001 | 98 | |
| 运放放大倍数 | 3.76 | 4 | 4.24 | - | AMP_CR1[AMP0_GAIN] = 010 | 98 | |
| 运放放大倍数 | 7.5 | 8 | 8.5 | - | AMP_CR1[AMP0_GAIN] = 011 | 98 | |
| 运放放大倍数 | 15 | 16 | 17 | - | AMP_CR1[AMP0_GAIN] = 100 | 98 | |
| 采样时间 | 3 | 63 | ADCLK | 94 | |||
| θJA 芯片结温相对环境温度 | θJA | 36 | ℃/W | JEDEC 标准,2S2P PCB | 99 | ||
| θJA 芯片结温相对环境温度 | θJA | 60 | ℃/W | JEDEC 标准,1S0P PCB | 99 | ||
| θJC 芯片结温相对封装表面温度 | θJC | 10.5 | ℃/W | JEDEC 标准,1S0P PCB | 99 |
CAD (KiCad official)
- Symbol:
FU6562L - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
fu6562l-etched.step/fu6562l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fu6562l.step/fu6562l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (399 pp, sha256
7f4db0deacdfc220, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FU6562L
**Fortior Tech** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
FU6562L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.1/C2P/A2P/AD8/HAL2S | bidirectional | GPIO P2.1; alternate functions are CMP2 positive input, AMP2 positive input, ADC channel 8 input, and Hall-IC2 logic-level input after function transfer. |
| 2 | P2.2/C2M/A2M | bidirectional | GPIO P2.2; alternate functions are CMP2 negative input and AMP2 negative input. |
| 3 | P2.4/AD2 | bidirectional | GPIO P2.4; ADC channel 2 input, which can be used for bus voltage sampling. |
| 4 | P2.6/C3M/DA0/AD11 | bidirectional | GPIO P2.6; alternate functions are CMP3 negative input, DAC0 output (no buffer, capacitive load only per DAC note), and ADC channel 11 input. |
| 5 | P2.7/AD4/C3P/A0O/C4M | bidirectional | GPIO P2.7; ADC channel 4 input used for bus current sampling, also CMP3 positive input, AMP0 output and CMP4 negative input. |
| 6 | P3.0/A0M | bidirectional | GPIO P3.0; AMP0 negative input. |
| 7 | P3.1/A0P | bidirectional | GPIO P3.1; AMP0 positive input. |
| 8 | P3.3/AD6 | bidirectional | GPIO P3.3; ADC channel 6 input. |
| 9 | P3.4/AD7/C3PS/C4MS | bidirectional | GPIO P3.4; ADC channel 7 input, and when AMP_CR0[CP_EN]=1 the AMP0 output (P2.7) is routed through an internal 50k resistor to P3.4, which requires an external 1μF capacitor for bus average current sampling; also CMP3 positive and CMP4 negative inputs after function transfer. |
| 10 | P3.5/VREF | bidirectional | ADC external reference voltage input or internal VREF output; externally connect R + C in series to VSS with R = 22Ω and C = 1μF to 4.7μF. |
| 11 | P0.1/DBG/TIM4/TIM3S/RXD2S | bidirectional | GPIO P0.1 with external interrupt INT0 capability; serves as Debug port, Timer4 (before transfer), Timer3 (after transfer), and UART2 RXD (two-wire) or TXD output/RXD input (single-wire) after transfer. |
| 12 | P0.5/TXD/SCLK | bidirectional | GPIO P0.5 with external interrupt INT0 capability; UART1 TXD output and SPI clock SCLK. |
| 13 | P0.6/RXD/MOSI | bidirectional | GPIO P0.6 with external interrupt INT0 capability; UART1 RXD input in two-wire mode or TXD output in single-wire mode, and SPI MOSI (master output / slave input). |
| 14 | P0.7/MISO/TIM2S/QEPA | bidirectional | GPIO P0.7; SPI MISO (master input / slave output), Timer2 input or output after transfer, and QEP encoder A input. |
| 15 | COM | power_in | DRV ground pin for the 6N pre-driver section. |
| 16 | LW | output | 6N pre-driver W-phase low-side bridge PWM output. |
| 17 | LV | output | 6N pre-driver V-phase low-side bridge PWM output. |
| 18 | LU | output | 6N pre-driver U-phase low-side bridge PWM output. |
| 19 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 20 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 21 | VBU | power_in | 6N pre-driver U-phase high-side bootstrap supply pin. |
| 22 | HU | output | 6N pre-driver U-phase high-side bridge PWM output. |
| 23 | VSU | power_in | 6N pre-driver U-phase input used as the ground reference for the U-phase high-side bootstrap. |
| 24 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 25 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 26 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 27 | VSV | power_in | 6N pre-driver V-phase input used as the ground reference for the V-phase high-side bootstrap. |
| 28 | HV | output | 6N pre-driver V-phase high-side bridge PWM output. |
| 29 | VBV | power_in | 6N pre-driver V-phase high-side bootstrap supply pin. |
| 30 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 31 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 32 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 33 | VSW | power_in | 6N pre-driver W-phase input used as the ground reference for the W-phase high-side bootstrap. |
| 34 | HW | output | 6N pre-driver W-phase high-side bridge PWM output. |
| 35 | VBW | power_in | 6N pre-driver W-phase high-side bootstrap supply pin. |
| 36 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 37 | NC | unconnected | Marked NC in the datasheet; no function assigned. |
| 38 | VCC | power_in | VCC supply pin; connect an external 1μF to 4.7μF capacitor. |
| 39 | VSS | power_in | Power ground pin. |
| 40 | VDD5 | power_in | 5V supply input VDD5 that cannot output power; connect an external 1μF to 4.7μF capacitor. |
| 41 | P4.7/TIM3S2/RXD2S2/RSTN/FICEK | input | GPIO P4.7 input with alternate functions Timer3 input, UART2 RXD input, external active-low reset input RSTN with internal pull-up, and FICE clock; the reset pin is low-active and must be low for more than 50μs to reset the chip. |
| 42 | P4.5/AD14 | bidirectional | GPIO P4.5 with external interrupt INT1 capability; ADC channel 14 input. |
| 43 | P1.2/TIM4S2/TXD2S2/FICED | bidirectional | GPIO P1.2 with external interrupt INT1 capability; Timer4 input or output, UART2 TXD output after transfer, and FICE data port. |
| 44 | P1.3/HBIAS/C1PS/A3O/AD12 | bidirectional | GPIO P1.3 with external interrupt INT1 capability; HALL bias supply internally switched to VDD5, also CMP1 positive input after transfer, AMP3 output and ADC channel 12 input. |
| 45 | P1.4/C0P/A3M/AD10/HAL0S | bidirectional | GPIO P1.4 with external interrupt INT1 capability; CMP0 positive input, AMP3 negative input, ADC channel 10 input, and Hall-IC0 logic-level input after transfer. |
| 46 | P1.5/C0M/C2PS/A3P/AD13 | bidirectional | GPIO P1.5 with external interrupt INT1 capability; CMP0 negative input, CMP2 positive input after transfer, AMP3 positive input and ADC channel 13 input. |
| 47 | P1.6/C1P/A1P/AD9/HAL1S | bidirectional | GPIO P1.6 with external interrupt INT1 capability; CMP1 positive input, AMP1 positive input, ADC channel 9 input, and Hall-IC1 logic-level input after transfer. |
| 48 | P1.7/C1M/A1M | bidirectional | GPIO P1.7 with external interrupt INT1 capability; CMP1 negative input and AMP1 negative input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作时结温 | TJ | -40 | | 125 | ℃ | | 81 |
| 储存温度 | Tstg | -55 | | 125 | ℃ | | 81 |
| VCC 相对 VSS 的电压 | VCC | -0.3 | | 22 | V | | 81 |
| VDD5 相对 VSS 的电压 | VDD5 | -0.3 | | 6.5 | V | | 81 |
| 高侧浮动电压 | VBU,BV,BW | -0.3 | | 625 | V | | 81 |
| 低侧供电电压 | | -0.3 | | | V | | 81 |
| 低侧输出电压 | VLU,LV,LW | -0.3 | | | V | | 81 |
| RSTN、GPIO 相对 VSS 的电压 | | -0.3 | | | V | | 81 |
| VCC 工作电压 | VCC | 7 | | 20 | V | | 83 |
| VDD5 工作电压 | VDD5 | 3 | | 5.5 | V | | 83 |
| 工作时环境温度 | TA | -40 | | 85 | ℃ | | 83 |
| 工作时环境温度 | TA | | | 105 | ℃ | VCC ≤ 15V & Ivcc ≤ 30mA | 83 |
| Ivcc工作电流 | Ivcc | | 12 | | mA | VCC = 15V | 83 |
| Ivcc待机电流 | Ivcc | | 5 | | mA | VCC = 15V | 83 |
| Ivcc睡眠电流 | Ivcc | | 180 | | μA | VCC = 15V | 83 |
| 高电平输出峰值电流 | | | 0.21 | | A | | 93 |
| 低电平输出峰值电流 | | | 0.36 | | A | | 93 |
| VCC 供电电压 | VCC | 12 | | 20 | V | | 93 |
| VCC 静态电流 | | | 0.14 | | mA | | 93 |
| 高侧浮动电压 | VBU,BV,BW | | | 600 | V | | 93 |
| 高侧浮动偏移电压 | VSU,SV,SW | -20 | | | V | VBU,BV,BW | 93 |
| VCC 欠压保护开启电压 | | 8.1 | 9 | 9.9 | V | | 93 |
| VCC 欠压保护关断电压 | | 7.5 | 8.4 | 9.3 | V | | 93 |
| VCC 欠压保护迟滞电压 | | 0.4 | 0.6 | | V | | 93 |
| 输出上升时间 | | | 90 | | ns | 1nF 负载,从 10%上升至 90%时间 | 93 |
| 输出下降时间 | | | 50 | | ns | 1nF 负载,从 90%下降至 10%时间 | 93 |
| 死区时间 | DT | | 500 | | ns | | 93 |
| 输出上升时间 | | | 15 | | ns | 50pF 负载,从 10%上升至 90%时间,TA = 25℃ | 87 |
| 输出下降时间 | | | 13 | | ns | 50pF 负载,从 90%下降至 10%时间,TA = 25℃ | 87 |
| 上拉电阻[2] | | | 33 | | kΩ | VDD5 = 5V | 87 |
| VREF | VREF | | 4.5 | | V | VREF_CR[VREFVSEL] = 00 | 96 |
| VREF | VREF | | 5 | | V | VREF_CR[VREFVSEL] = 01 | 96 |
| VREF | VREF | | 3 | | V | VREF_CR[VREFVSEL] = 10 | 96 |
| VREF | VREF | | 4 | | V | VREF_CR[VREFVSEL] = 11 | 96 |
| VDD5 电压 | VDD5 | 4.7 | 5 | 5.3 | V | VCC = 7V ~ 20V | 99 |
| RSTN 复位低电平最小时间 | | 50 | | | μs | | 98 |
| VDD5 低电压复位电压 | | 2.8 | 3 | 3.2 | V | 复位电压选择 LVR = 3.0V | 98 |
| 系统时钟频率 | | 23.5 | 24 | 24.5 | MHz | | 98 |
| 低速时钟频率 | | 29 | 32.8 | 37 | kHz | | 98 |
| BEMF 内置电阻 | | 5.4 | 6.8 | 8.2 | kΩ | | 98 |
| VICMR共模输入范围 | VICMR | 0 | | | V | | 97 |
| VOS运放的失配电压 | VOS | | 5 | 10 | mV | TA = 25℃ | 97 |
| AOL开环增益 | AOL | | 80 | | dB | RL = 100kΩ | 97 |
| UGBW 单位增益带宽 | UGBW | 6 | 10 | | MHz | CL = 40pF | 97 |
| SR 运放的摆率 | SR | 10 | 15 | | V/μs | CL = 40pF | 97 |
| 运放放大倍数 | | 1.88 | 2 | 2.12 | - | AMP_CR1[AMP0_GAIN] = 001 | 98 |
| 运放放大倍数 | | 3.76 | 4 | 4.24 | - | AMP_CR1[AMP0_GAIN] = 010 | 98 |
| 运放放大倍数 | | 7.5 | 8 | 8.5 | - | AMP_CR1[AMP0_GAIN] = 011 | 98 |
| 运放放大倍数 | | 15 | 16 | 17 | - | AMP_CR1[AMP0_GAIN] = 100 | 98 |
| 采样时间 | | 3 | | 63 | ADCLK | | 94 |
| θJA 芯片结温相对环境温度 | θJA | | 36 | | ℃/W | JEDEC 标准,2S2P PCB | 99 |
| θJA 芯片结温相对环境温度 | θJA | | 60 | | ℃/W | JEDEC 标准,1S0P PCB | 99 |
| θJC 芯片结温相对封装表面温度 | θJC | | 10.5 | | ℃/W | JEDEC 标准,1S0P PCB | 99 |
## CAD (KiCad official)
- Symbol: `FU6562L`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `fu6562l-etched.step` / `fu6562l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fu6562l.step` / `fu6562l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Fortior Tech datasheet](docs/fu6562l-datasheet.pdf) (399 pp, sha256 `7f4db0deacdfc220`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fu6562l-datasheet.pdf)