main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers fu6562l: viewers · Ray
fu6562l-etched.glb Publish 0.1.0 · Ray
fu6562l-etched.step fu6562l: factory component page (tier=lcsc) · Ray
fu6562l-hero.glb fu6562l: hero GLB from the etched model (keeps the MPN mark) · Ray
fu6562l-hero.overlay.json Publish 0.1.0 · Ray
fu6562l.glb Publish 0.1.0 · Ray
fu6562l.kicad_mod Publish 0.1.0 · Ray
fu6562l.kicad_sym Publish 0.1.0 · Ray
fu6562l.lbr Publish 0.1.0 · Ray
fu6562l.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 48 pins · Ray

FU6562L

Fortior Tech · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

FU6562L from Fortior Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P2.1/C2P/A2P/AD8/HAL2S bidirectional GPIO P2.1; alternate functions are CMP2 positive input, AMP2 positive input, ADC channel 8 input, and Hall-IC2 logic-level input after function transfer.
2 P2.2/C2M/A2M bidirectional GPIO P2.2; alternate functions are CMP2 negative input and AMP2 negative input.
3 P2.4/AD2 bidirectional GPIO P2.4; ADC channel 2 input, which can be used for bus voltage sampling.
4 P2.6/C3M/DA0/AD11 bidirectional GPIO P2.6; alternate functions are CMP3 negative input, DAC0 output (no buffer, capacitive load only per DAC note), and ADC channel 11 input.
5 P2.7/AD4/C3P/A0O/C4M bidirectional GPIO P2.7; ADC channel 4 input used for bus current sampling, also CMP3 positive input, AMP0 output and CMP4 negative input.
6 P3.0/A0M bidirectional GPIO P3.0; AMP0 negative input.
7 P3.1/A0P bidirectional GPIO P3.1; AMP0 positive input.
8 P3.3/AD6 bidirectional GPIO P3.3; ADC channel 6 input.
9 P3.4/AD7/C3PS/C4MS bidirectional GPIO P3.4; ADC channel 7 input, and when AMP_CR0[CP_EN]=1 the AMP0 output (P2.7) is routed through an internal 50k resistor to P3.4, which requires an external 1μF capacitor for bus average current sampling; also CMP3 positive and CMP4 negative inputs after function transfer.
10 P3.5/VREF bidirectional ADC external reference voltage input or internal VREF output; externally connect R + C in series to VSS with R = 22Ω and C = 1μF to 4.7μF.
11 P0.1/DBG/TIM4/TIM3S/RXD2S bidirectional GPIO P0.1 with external interrupt INT0 capability; serves as Debug port, Timer4 (before transfer), Timer3 (after transfer), and UART2 RXD (two-wire) or TXD output/RXD input (single-wire) after transfer.
12 P0.5/TXD/SCLK bidirectional GPIO P0.5 with external interrupt INT0 capability; UART1 TXD output and SPI clock SCLK.
13 P0.6/RXD/MOSI bidirectional GPIO P0.6 with external interrupt INT0 capability; UART1 RXD input in two-wire mode or TXD output in single-wire mode, and SPI MOSI (master output / slave input).
14 P0.7/MISO/TIM2S/QEPA bidirectional GPIO P0.7; SPI MISO (master input / slave output), Timer2 input or output after transfer, and QEP encoder A input.
15 COM power_in DRV ground pin for the 6N pre-driver section.
16 LW output 6N pre-driver W-phase low-side bridge PWM output.
17 LV output 6N pre-driver V-phase low-side bridge PWM output.
18 LU output 6N pre-driver U-phase low-side bridge PWM output.
19 NC unconnected Marked NC in the datasheet; no function assigned.
20 NC unconnected Marked NC in the datasheet; no function assigned.
21 VBU power_in 6N pre-driver U-phase high-side bootstrap supply pin.
22 HU output 6N pre-driver U-phase high-side bridge PWM output.
23 VSU power_in 6N pre-driver U-phase input used as the ground reference for the U-phase high-side bootstrap.
24 NC unconnected Marked NC in the datasheet; no function assigned.
25 NC unconnected Marked NC in the datasheet; no function assigned.
26 NC unconnected Marked NC in the datasheet; no function assigned.
27 VSV power_in 6N pre-driver V-phase input used as the ground reference for the V-phase high-side bootstrap.
28 HV output 6N pre-driver V-phase high-side bridge PWM output.
29 VBV power_in 6N pre-driver V-phase high-side bootstrap supply pin.
30 NC unconnected Marked NC in the datasheet; no function assigned.
31 NC unconnected Marked NC in the datasheet; no function assigned.
32 NC unconnected Marked NC in the datasheet; no function assigned.
33 VSW power_in 6N pre-driver W-phase input used as the ground reference for the W-phase high-side bootstrap.
34 HW output 6N pre-driver W-phase high-side bridge PWM output.
35 VBW power_in 6N pre-driver W-phase high-side bootstrap supply pin.
36 NC unconnected Marked NC in the datasheet; no function assigned.
37 NC unconnected Marked NC in the datasheet; no function assigned.
38 VCC power_in VCC supply pin; connect an external 1μF to 4.7μF capacitor.
39 VSS power_in Power ground pin.
40 VDD5 power_in 5V supply input VDD5 that cannot output power; connect an external 1μF to 4.7μF capacitor.
41 P4.7/TIM3S2/RXD2S2/RSTN/FICEK input GPIO P4.7 input with alternate functions Timer3 input, UART2 RXD input, external active-low reset input RSTN with internal pull-up, and FICE clock; the reset pin is low-active and must be low for more than 50μs to reset the chip.
42 P4.5/AD14 bidirectional GPIO P4.5 with external interrupt INT1 capability; ADC channel 14 input.
43 P1.2/TIM4S2/TXD2S2/FICED bidirectional GPIO P1.2 with external interrupt INT1 capability; Timer4 input or output, UART2 TXD output after transfer, and FICE data port.
44 P1.3/HBIAS/C1PS/A3O/AD12 bidirectional GPIO P1.3 with external interrupt INT1 capability; HALL bias supply internally switched to VDD5, also CMP1 positive input after transfer, AMP3 output and ADC channel 12 input.
45 P1.4/C0P/A3M/AD10/HAL0S bidirectional GPIO P1.4 with external interrupt INT1 capability; CMP0 positive input, AMP3 negative input, ADC channel 10 input, and Hall-IC0 logic-level input after transfer.
46 P1.5/C0M/C2PS/A3P/AD13 bidirectional GPIO P1.5 with external interrupt INT1 capability; CMP0 negative input, CMP2 positive input after transfer, AMP3 positive input and ADC channel 13 input.
47 P1.6/C1P/A1P/AD9/HAL1S bidirectional GPIO P1.6 with external interrupt INT1 capability; CMP1 positive input, AMP1 positive input, ADC channel 9 input, and Hall-IC1 logic-level input after transfer.
48 P1.7/C1M/A1M bidirectional GPIO P1.7 with external interrupt INT1 capability; CMP1 negative input and AMP1 negative input.

Key specifications

Parameter Value
Manufacturer Fortior Tech
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
工作时结温 TJ -40 125 ℃ 81
储存温度 Tstg -55 125 ℃ 81
VCC 相对 VSS 的电压 VCC -0.3 22 V 81
VDD5 相对 VSS 的电压 VDD5 -0.3 6.5 V 81
高侧浮动电压 VBU,BV,BW -0.3 625 V 81
低侧供电电压 -0.3 V 81
低侧输出电压 VLU,LV,LW -0.3 V 81
RSTN、GPIO 相对 VSS 的电压 -0.3 V 81
VCC 工作电压 VCC 7 20 V 83
VDD5 工作电压 VDD5 3 5.5 V 83
工作时环境温度 TA -40 85 ℃ 83
工作时环境温度 TA 105 ℃ VCC ≤ 15V & Ivcc ≤ 30mA 83
Ivcc工作电流 Ivcc 12 mA VCC = 15V 83
Ivcc待机电流 Ivcc 5 mA VCC = 15V 83
Ivcc睡眠电流 Ivcc 180 μA VCC = 15V 83
高电平输出峰值电流 0.21 A 93
低电平输出峰值电流 0.36 A 93
VCC 供电电压 VCC 12 20 V 93
VCC 静态电流 0.14 mA 93
高侧浮动电压 VBU,BV,BW 600 V 93
高侧浮动偏移电压 VSU,SV,SW -20 V VBU,BV,BW 93
VCC 欠压保护开启电压 8.1 9 9.9 V 93
VCC 欠压保护关断电压 7.5 8.4 9.3 V 93
VCC 欠压保护迟滞电压 0.4 0.6 V 93
输出上升时间 90 ns 1nF 负载,从 10%上升至 90%时间 93
输出下降时间 50 ns 1nF 负载,从 90%下降至 10%时间 93
死区时间 DT 500 ns 93
输出上升时间 15 ns 50pF 负载,从 10%上升至 90%时间,TA = 25℃ 87
输出下降时间 13 ns 50pF 负载,从 90%下降至 10%时间,TA = 25℃ 87
上拉电阻[2] 33 kΩ VDD5 = 5V 87
VREF VREF 4.5 V VREF_CR[VREFVSEL] = 00 96
VREF VREF 5 V VREF_CR[VREFVSEL] = 01 96
VREF VREF 3 V VREF_CR[VREFVSEL] = 10 96
VREF VREF 4 V VREF_CR[VREFVSEL] = 11 96
VDD5 电压 VDD5 4.7 5 5.3 V VCC = 7V ~ 20V 99
RSTN 复位低电平最小时间 50 μs 98
VDD5 低电压复位电压 2.8 3 3.2 V 复位电压选择 LVR = 3.0V 98
系统时钟频率 23.5 24 24.5 MHz 98
低速时钟频率 29 32.8 37 kHz 98
BEMF 内置电阻 5.4 6.8 8.2 kΩ 98
VICMR共模输入范围 VICMR 0 V 97
VOS运放的失配电压 VOS 5 10 mV TA = 25℃ 97
AOL开环增益 AOL 80 dB RL = 100kΩ 97
UGBW 单位增益带宽 UGBW 6 10 MHz CL = 40pF 97
SR 运放的摆率 SR 10 15 V/μs CL = 40pF 97
运放放大倍数 1.88 2 2.12 - AMP_CR1[AMP0_GAIN] = 001 98
运放放大倍数 3.76 4 4.24 - AMP_CR1[AMP0_GAIN] = 010 98
运放放大倍数 7.5 8 8.5 - AMP_CR1[AMP0_GAIN] = 011 98
运放放大倍数 15 16 17 - AMP_CR1[AMP0_GAIN] = 100 98
采样时间 3 63 ADCLK 94
θJA 芯片结温相对环境温度 θJA 36 ℃/W JEDEC 标准,2S2P PCB 99
θJA 芯片结温相对环境温度 θJA 60 ℃/W JEDEC 标准,1S0P PCB 99
θJC 芯片结温相对封装表面温度 θJC 10.5 ℃/W JEDEC 标准,1S0P PCB 99

CAD (KiCad official)

  • Symbol: FU6562L
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: fu6562l-etched.step / fu6562l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fu6562l.step / fu6562l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Fortior Tech datasheet (399 pp, sha256 7f4db0deacdfc220, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF